Date: 19/11/2018 1:0

Beeman 5031 30mm Rings, High, 9.5-11.5mm Dovetail

5.012 reviews
Beeman 5031 30mm.

Roll over image to zoom in

  • Description
  • Customer reviews
  • Questions & Answers
  • 30mm rings
  • High profile
  • Fits 9.5-11.5mm dovetail
  • 4 hex screws/ring to secure scope
  • Vertical scope stop pin (removable)
The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Item Code: BN-5031 [PY-A-1946]

other products by Beeman

Average Customer Review

5.0 (12 reviews)
4 star3 star2 star1 star

Create an online review and share your thoughts with other customers

5.0 5.0

2.0 2.0

By Paul from USA on 2017-10-11
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Very nice rings, smooth,well shaped,no sharp corners.

Things I would have changed: The screws that tighten the rings to the dove tail are short by about 1/8" they could be longer making them less likely to strip out the threads on the rings.

What others should know: The price, I can't physically see any diffidence between these rings and the 13.00 dollar rings made by Leapers. I thought I was buying something special because there were made by Sports Match. Don't get me wrong these are very nice rings, but the 13.00 dollar rings from Leapers will do the same job. So save your money and get the high ring from Leapers. I've mounted enough scopes to know what I'm talking about believe me.


5.0 5.0

5.0 5.0

By Randy from USA on 2016-12-13
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Excellent rings. I mounted a Hawke 30mm 6.5 X 20 - 42mm sidewinder scope on my R1 using these rings. They captured the R1's dovetails perfectly. Beeman doesn't actually make these rings, but they sure know what fits their guns. There was 3/8" clearance between the "bell" and the receiver, and 3/4" between the tube and the receiver. I like that 3/4" space as I can wrap my thumb around the receiver when I cock the gun.

Things I would have changed: Nothing. They are very complimentary in a flat black finish with smooth edges.

What others should know: After determining the proper eye relief and correct orientation of the cross hairs, I degreased both sides of the screw mating surfaces for both the rings to receiver and the cap to ring body with "Remington Action Gun Cleaner Degreaser" (and the claws of the clamp and the dovetail on the receiver) and applied a little Blue Loctite to all contact surfaces. I tightened all screws in a criss cross pattern using the supplied allen wrench as a torque wrench. When the screws were tight, and the wrench had some flex, I let it cure for a day. After 1000 rounds they have not, and I expect they will not, ever move. The "high" rings work very well for me.


5.0 5.0

5.0 5.0

By Pamela from USA on 2016-10-01
See all my reviews
Was this review helpful?
3.01 rating

Things I liked: Great rings. High quality construction. Good match for Hawke Sport Optics 8-32X56 AO Sidewinder 30 SF Rifle Scope.


Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • Jean-Philippe from USA asked:

    Hello. Could you give me the base and ring torques using a TX200 .22 with a Hawke Sidewinder30 6.5-20. Thank you for your help.