BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Matte Black

Strong hold

WAY BTTER INSTRUCTIONS FROM MFG!

Once fitted by taking one. of the Allen screws to spread the clamp by screwing in from other side to open up clamp so it fits on 11mm rail, so it snaps one. excellent firm hold once you screw both Allen screws on one side .

Excellent holding power, and ease of installation.

None

Best bang for your buck.

Made in USA, simple design to center scope.

More detailed instructions would be nice, with a deeper discussion on tightening torque for the ring caps.

I used these rings to mount a Leupold VX-Freedom EFR Rifle Scope - 3x-9x-33mm on a TX200 HC w/ base screws torqued to ~35 inch lbs, ring caps to ~15. In >100 rounds there has been no movement. Coming from "real" guns I like to see the objective closer to the barrel but in this case that is a cosmetic preference, not functional. The TX200 comb is so high it works fine, and I could probably shoot well even with slightly higher rings.

Very well made the fit is always very good . I,ve used on air rifles and rimfire for years never a problem . I put them on a daystate hunter regal and anschutz 1712 look good function great. Made in USA nothing else to say.

There,s nothing I would change they got it right.

Like everything else theyre a little expensive now but what isnt.

Love BKL rings! The only ones I know of that work perfectly on a curved dovetail. All my rifles get BKL rings and Leupold scopes.

Nothing.

If you havent already, try a set. I don't know of another company whose rings fit an 11mm dovetail with a curved arc barrel.

Outstanding mounts and easy to use. These provide a good low mount to the barrel even with the large bell on my scope, so not much drop to correct for. Built to last. Slowly changing out from SportsMatch AT66 to these for all my competition rifles

They should be sold as a pair like the 1" versions rather than singly.

One of the rings Pyramyd sent had obviously been opened and mounted up. The ring was in pieces and had scratches all around the mounting hex bolts. I thought Pyramyd should have caught that but this set had been hard to get and I did not want to send them back as I needed them now. A little buffing and touch-up and I was fine, but buyers should purchase any mount knowing that was my experience.

These rings are a great way to avoid slippage!

Nothing

These rings are great for any dovetail scope mount system.

Needed a set of lower rings as i purchased a thumbhole stock fir my gen 1 marauder the BKL rings did the job

nothing

Rock solid mounts for my TX / Hawke combo. Having two spring powered guns I can attest to the fact that scope movement can be a problem. Not with the BKL mounts. Springer rated, these mounts kick @$$!!

Nothing. Some might say they are pricey, but you do get what you pay for. To me it's the design that's priceless. A great design is worth the money every time in my book.

When Pyramyd recommended the BKL mounts to me I was a more than a little skeptic. The mounts do not use or posses a stop pin. However the salesman told me they have enough gripping power that they don't need one. To my relief they were correct. It really cones down to the design of the mount and it is a great one at that. Where other mounts will use several pieces to grip the rail the BKL mounts use a single piece design. This gives the user two important benefits. The first is the mount is 100% self centering on your rail. Because the mount is of a single piece design it is symmetric to, and will always be perfectly centered on the rail. In my case on the TX the fit of the mount was so tight I actually had to use the spreading feature just to get the mount bases onto my rail. Talk about gripping power! The second design feature is the double strap scope tube grip design. This design clamps the tube tightly without creating any damage. Great design leads to superior performance.

Perfect

Nothing