Centerpoint 1" Rings, Medium, 3/8" Reviews

These rings work great on my HW 80. I put a Hawke Vantage scope on it. The front objective is 54 mm, or 2.1 inches. It lays close to the rifle and still has room to turn it. Brilliant!

Nothing

NA

Rings fit great on my Storm Rider . Value for money

These worked perfectly for mounting my Swiss Arms 3-9x40 scope on my Crosman 1077. The 4-bolt top scope mount an 2-bolt rail mount give a solid connection to both devices.

These are perfect. Don't change anything, Centerpoint!

Just the way these rings should have been designed...

Good solid mount, with no slipping on my springers. Comes with extra screws which is a good thing.

A little more QC on the drilling and tapping because I ordered three sets and had a stripped screw on each set.

Be very carefull about over tourquing

The Centerpoint rings have worked well for me. I've never had a scope move while using them.

The price and quality.

Nothing

Buy them they are very sturdy.

Good value, easy to use.

Nothing

Hold scope good and snug.

Good quality and work as they should....

nothing

nope

These things are outstanding, both in function and looks.

Offer a set in "Low" for use with the generic 4x32 scopes that come on many break barrel guns.

A 40mm scope with an AO ring is a very close fit. Mine fit, but a few people say they were forced to buy the "High" version. My guns have ~1mm clearance, which I love for both looks and function, but that means no scope cap or you need to sand a flat spot on the cap.

Great scope rings for the price!

Nothing- they work well as is!

Low price and ease of use. A no frills bargain if you ask me, and worth every penny.

Really can't go cheaper in price, so I would change nothing.

For the money, these rings are quite nice. They help me to bring my 40mm objective scope closer to the barrel on my Marauder, so I could obtain a better cheek weld to the Marauder stock. I would not hesitate to recommend these budget rings to anyone looking for a solid no frills set of rings.

Great value for the price! These mounts served perfectly in the application for which they were used.

Not a thing.

I used these mounts with a scope having a 40mm objective and they were just what I needed- perfect height.

Very solid rings

Nothing

I bought these rings for my Benjamin Discovery with a Centerpoint 4-16X40 scope and it fits the gun perfectly. They are very solid rings. These are the best rings I've found, and a great value for the money, I plan to purchase Centerpoint rings from here on out.

This thing really holds well. The included scope stop pins are fantastic. My scope was traveling with each shot until I put on these rings. Price is great. Great value here if your scope is moving on your magnum springers.

Nothing

Good Quality, Great Price

None

Holds up well on magnum springer.

nothing

none

These Rings fit wonderfully on My Marauder air rifle. They also fit nicely on the Center Point Scope, 4x16x40.

That they would give info on the exact height of the rings.

These rings, with a Center Point Scope 4x16x40 on A Marauder Air Rifle, gave me exactly .10 of an inch to my barrel. Thats about as perfect as it gets. Plus there is plenty of room for the clip. Perfect price for perfect rings.

Quality for price. These are great SOLID scope mounts for the price. Nice big screws compared to most other mounts in this price range.

A little tall for medium height rings. Saddle height on these measure 14mm. I'm more comfortable with 12mm for scopes with 32mm to 40mm objectives. Now 2mm may not seem like much. But if you have a Springer with any kind of Barrel Droop. 2mm can add some additional compensation to your elevation adjustment at initial site-in. But if you're mounting a scope with say a 42mm or 44mm objective. Then the extra 2mm will probably come in handy.

Rail mount and top cap screws are nice and large. Less likely to round over inside if you decide to try and really torch them down. But that's the thing. You don't need to torch them down to keep your scope in place. Just tighten them. If you have a Magnum Springer air rifle. These are the mounts you want. I use these mounts on two different Magnum Springers. After initial mounting and site-in. I haven't had to re-tighten any of the screws. I did check them periodically at first, but then quit after more than 500 rounds. I still haven't noticed a bit of Scope Creep after more than 1000 rounds through each rifle.

Work as well as any other scope ring I use and I use many. Price to quality ratio excellent.

Nothing.