- Home
- Customer Reviews
Kingman Scuba Charging Set reviews - page 1
 | ||||||
Create an online review and share your thoughts with other customers
| ||||||
|
- 12345
Things I liked:It fits on my scuba tank with no clearance issues.By David from USA on 2011-10-29 11:50:47
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:Hose is way too short which makes it awkward to fill any PCP rifle. Gauge is too small and I'm not confident of its accuracy. It's simply a poorly designed tool; there are better alternatives but they are twice the price.
What others should know:Don't buy a charger with a hose shorter than 3'.
Things I liked:It's a very well made item, and easy to use.By Larry from USA on 2011-08-19 10:07:03
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:I would like to have the choice of a longer hose. Filling a rifle from a scuba tank using this adapter, is a little cumbersome with the short hose.
What others should know:The only comment I would have is that when filling a gun, do it slowly as high pressure air transfer causes heat.CommentsBy arthur from USA on 2012-01-10 18:31:24 0 
ive seen these adaptors before, used in paintball as well. the main body of this is aluminum, NOT stainless steel, as such the stainless steel screws/bolts can easiy cross thread the aluminum block. and dont believe the psi rating either...
Things I liked:Good price on the adapter and hose. Easy to install and use.By Customer from USA on 2011-08-05 11:46:07
See all my reviewsWas this review helpful? 51 rating
Things I would have changed:Why didn't you tell me that it is useless without a disconnect? I could have bought both at the same time and I could be using my Marauder now instead of waiting for the part that I need to get the air into the rifle. It would help if your descriptive in the catalog showed what connections are needed on what airguns.
What others should know:Buy the quick connect when you buy the scuba tank adapter.
Things I liked:after a couple tightinings of fittings no more air leaks, added the quick disconnect fitting , fantastic worked just fine.By GEORGE from USA on 2011-08-01 14:14:30
See all my reviewsWas this review helpful? 00 ratings
What others should know:typical scuba tank only holds 3,ooo PSI just like the Marauder rifle, so at first fill up, pressure drops below 3000 and steady there after,but don't get me wrong it can sure save a lot of hand pumping to get the gun up to 3000 PSI.
Things I liked:It 's very sensitive and accurate as far as I can tell.By Mike from USA on 2011-07-24 11:47:31
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:A longer hose is REALLY necessary. There's no room for positional adjustments. I.E. if you're cradling a rifle in one hand and filling with other and need to even slightly change position, you could start to tip the tank in whatever direction you move. A longer hose makes filling more comfortable.
What others should know:It does tend to leak a little around the tank seal upward of 2000lbs. I think the O ring (Supplied with the tank NOT this product) doesn't have a large enough wall diameter and isn't getting enough "squish" to make an effective seal. Easy fix.
Things I liked:nice design,By irfan from USA on 2011-05-25 00:07:37
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:add a longer hose
What others should know:try to find a longer hose adapter, its hard to find a package deal with options allowing you to get a adapter with a suitable hose for easyer access to air gun fittings
Things I liked:Nice design, poorly executedBy Thomas from USA on 2011-04-03 14:27:06
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:All conections leaked badly. I was able to put teflon tape on the pressure guage and tighten it. To tighten the hose it must be attached to a SCUBA tank (no pressure) The bleed screw still leaks like a sieve, but I can fill the pistol even with the leak.
What others should know:I called to get a new bleed screw and was told they didn't have any and no idea when they would come in. It was suggested that I tighten it with Vice Grips to lessen the leaking
Things I liked:Quality product and well made.By Michael from USA on 2011-04-03 09:23:12
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:I would like to see a larger pressure gauge. Also the relief valve/screw could be larger.
What others should know:The hose was not screwed tight to the adapter and I had to reinstall with applying some teflon tape on the threads and tightening the hose to the adapter. The pressure gauge is not very accurate, mine was off by 800 psi.
Things I liked:Fit right onto my new 100 cu ft scuba tank like a glove. Works perfectly.By Kenneth from USA on 2011-02-27 16:20:51
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:A longer hose would be better, but I guess in these days of litigation the manufacturer must be concerned that if someone forgets to release the pressure in the hose before disconnecting it from the air gun it could cause some injury.
What others should know:As others have said; be sure to order the female adapter to fit your air gun.- 12345
| Show: | Items |
| Customer Support | Shopping Services | Confident Shopping |
|---|---|---|
Copyright © 1999-2011 Pyramyd Air. All Rights Reserved.
All other designated trademarks, copyrights, and brands are the property of their respective owners.
Overall rating:3 3.0
Value for money:2 2.0
See all my reviews
Things I would have changed:Make the Hose at least 3ft long! I have to move it around for the air to stop leaking
What others should know:If you get this you also have to buy the quick disconnect which they should included in. It makes the price much higher. I returned mine and got it somewhere else a lot cheaper with a longer hose.