- Home
- Customer Reviews
Leapers Quick Aim Electronic Dot Sight reviews - page 1
 | ||||||
Create an online review and share your thoughts with other customers
| ||||||
|
- 123
Things I liked:PriceBy Jigar from USA on 2011-08-01 11:03:24
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:Everything. This thing is a piece of junk. Save your money and buy something better. Could not sight in.
Things I liked:Price, but you get what you pay for.By PAUL from USA on 2011-04-11 14:11:11
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:Secure the adjustment plate to the base mount. It moves all over the place and will not stay sighted
What others should know:Not built all that well and will not stay sighted in. Auctualy had to tape the top of the sight to the base for it to hold sightinbut then you can't adjustanymore. Dot flickers quite a bit. Maybe this would be good for a paintball marker. Not for accurate shooting
Things I liked:Not much but what do you expect for the price. Weaver mounts both came threaded instead of just one so I had to drill out one. Plastic adjustment wheel for up and down broke into peices the first time I tried adjusting.By Lynn from USA on 2011-03-16 20:53:55
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:Man it would be nice to buy something that isnt made in China. Its just for a BB pistol but man really poor quality.
What others should know:This review has nothing to do with Pyramyd Air they are the best I have found to deal with period, and I know they would take it back but its working. I just have to adjust the up and down with small pliers. Not worth the time to try with another that would be no better.
Things I liked:Inexpensive.By Sean from USA on 2011-01-31 11:45:22
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:Improve the quality. The sight was not secure on its own mount. Even though it was securely mounted on the Weaver Rail. The lens portion was loose and made it impossible to "Zero it in."
What others should know:It appeared to be a previously returned item. If you are going to resell these items they should be thoroughly inspected and tested first.
Things I liked:I wanted a quick aim red dot sight that was inexpensive, but it had to have a fairly well defined dot and a larger field of view than than some of the other sights I had seen. This sight is excellent for the money. I don't have much experience with red dot sights, but some of the others I looked at had fuzzy red blobs instead of precise dots. This sight was much better. Easy adjustments and easy battery access.By Matt M from USA on 2010-12-31 21:28:26
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:The finish on top needs to be less reflective. Although it is a textured finish, it is textured plastic that gives a red streak reflection when looking through the sight. A piece of cloth camo tape cut to fit between the light and the lens worked well.
Things I liked:The Leapers Quick Aim Electronic Sight is a good sight for the money. It is my first experience with a dot sight. My eyes have trouble focusing with open sights and I thought the low cost of the Leapers would allow me to try a dot sight without investing a lot of money to find out if it would improve my shooting. It worked great for me. It was easy to mount on my new Crossman 1077, and it has a bright sharp red dot with a large field of vision and you can shoot with both eyes open.By vince from USA on 2010-10-26 20:48:36
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:At under a ten dollar cost for the sight I can’t see what could be changed to improve the sight other than tightening the tolerances on the adjusting mechanism specs and enforcing better quality control of the product.
What others should know:The sight adjusting screws are sloppy and have no feel when you make adjustments but it appears to stay adjusted when you get it zeroed in. I also had to use a drop of Super glue to hold the on/off switch in place
Things I liked:great sight for short range especially for pistols-surprisingly stableBy FRANK from USA on 2010-10-04 16:56:47
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:adjustments for windage and elevation are not real positive different battery compartment if this could be done without major increase in price
What others should know:sight must be removed to change battery ( not enough clearance for cover) but if done carefully does not require re-zeroing sight
Things I liked:Has a very low price to give you a taste of what an electronic dot sight is like to use. Mounts well onto Weaver/Picatinny rail and has a set of grips for 11 mm dovetails. Comes with extra CR2032 battery.By Leo from USA on 2010-09-18 00:40:05
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed:If the could improve the mounting design of the platform that has the window and dot projector but not increase the price by more than $5, it might get my rating from a 2-star to a 3 or 4-star.
What others should know:With the recoil of my Steel Storm that I use it on, the dot projector/window platform loosened upon its adjusters after jut a couple hundred shots. The o-rings under the adjuster knobs as suggested by others helps some but the adjusting threads in the platform get so loose that it flops around way too much. I added some foam rubber pads in strategic places to take up the slop but its still only marginally acceptable for plinking and not very good for target shooting.
Things I liked:light,fast, low cost - ideal for low priced air pistol easy to mount and zero inBy FRANK from USA on 2010-08-24 23:12:52
See all my reviewsWas this review helpful? 00 ratings
Things I would have changed: ? battery holder
What others should know:scope must be removed from gun to change battery - not enough clearance between scope and gun to remove battery cover no big deal and very little (if any) sighting in required- 123
| Show: | Items |
| Customer Support | Shopping Services | Confident Shopping |
|---|---|---|
Copyright © 1999-2011 Pyramyd Air. All Rights Reserved.
All other designated trademarks, copyrights, and brands are the property of their respective owners.
Overall rating:4 4.0
Value for money:4 4.0
See all my reviews
Things I would have changed:starburst of red around dot has to be fixed. gluing a polarizing filter,gray, on projector does the job (keep it small). can be bought on amazon.
What others should know:mounting screws are to short for some rails. need a lathe to undercut screw heads to get that extra thread . you can buy longer metric screws .