Leapers Space Age 1" Rings Reviews

Tape on inside of rings keeps scope from moving. 4 screws per ring are better than 2!

Nothing

This is the second set of these rings I've purchased. The first was for a Diana 34 I bought years ago, the second for a Diana 34 Pro-Compact I bought earlier this year. The rings that came with the Pro-Compact let the scope slip and caused some minor surface damage on the scope tube. These rings keep the scope in lock down mode... as it should be.

Solid construction and 4 screw scope attachment. The spring loaded clamp screw is a nice idea too. The price is a real bargain too. I wouldn't hesitate to use these rings on any firearm.

Nothing

Get these, they are a bargain

Price, sturdiness, features, looks. No big hex nut on the side of the mount. Works well.

Cross bar on Weaver mount is fairly large and square. Had trouble mounting it with 'B-Square 17021 11mm-to-Weaver Adapter, Adjustable'. Slots on Weaver rail were ever so slightly too small or mounts were a little too big/squared, not sure which. As I tightened the mounts on the rail, it went together 'smoothly'. Marred the rail and mounts a bit where they meet. A little filing might have resolved this maybe?

In spite of my gripe, I REALLY like these and would buy them again. Solid, sturdy, low, clean-looking and inexpensive... definitely worth the price.

The low price is nice. The tape on the inside kept my Leapers 4-16x50 scope from getting marred. So far after approx. 100 rounds no perceptible scope movement. 4 screw pattern on top is a solid design.

Make 'em free.

I'm using these rings on my RWS 34 Meisterschutze Pro Compact in conjunction with the UTG Scope Mount Base (0" compensation). This combination allows for plenty of clearance for a Leapers 4-16x50AO Rifle Scope. I used blue Lok-Tite on all screws (rings and base), and the result is a rock solid.

seem's to be well made ,fits fine.

none

lower shipping cost

4 screws on top and tape inside make this set of rings stable. Very solid . Buy the low mount rings and the leapers scope mount it is a perfect match for RWS 52.

Nothing

I had orig. rings that came with my RWS 52and could never keep them tight. Shooting not much fun. Then I bought the leapers scope mount , low mount rings and a new scope from Pyramyd and it is a perfect match for my rifle. Shooting is fun, groups are tight and just a pleasure having a mount that stays tight.

Works great on my RWS 350 magnum. If they work on that beast they will hold on anythilng in my opinion. I used them with the "0" compensation UTG base. The rise stil gives plenty of clearance (almost 3/4 inch) for a 40mm Obj. scope and more.

Nothing.

That anti-slip synthetic insert is the best improvment I've seen in rings in years. Grips like crazy and no slippage without overtightening.

They seem tough as nails. I love the weaver mounting I have these on a rws 34p with the droop compensating mount and a 4x32 bug buster and the parallax would not adjust out past 15 yards because the scope would then hit the mount cause the rings are so low.

Nada

These are LOW... super low. Might want to look into med or high rings if you have a larger scope

Reasonably priced, pretty good quality

Longer Heavier duty clamping screw that goes deeper into the base

Make sure you do not overtighten these mounts, you can damage them, rendering them useless. Clean screw with alcohol and apply BLUE LOCKTITE( let set for 24 hours) before using weapon to prevent loosening which WILL happen with a magnum springer.

The shape and screws. The tape on the inside.

Perhaps the soft aluminum is the perfect balance between strength and cost, but what if they were designed to not damage upon excessive torque?

They're probably the best for the money.

These rings are well made and finished. The strip of "sticky-tape" inside each ring does a good job of anchoring the scope in place.

These need no changes.

I only wish the rings purchased for my firearms years ago had included the strip of "sticky-tape". It would have saved a lot of time cutting Kraft paper "liners" to protect the scope's finish and reduce recoil-shift.

Very well built with nice spongy inserts to prevent marking up the scope. They also help keep the scope in place without using excessive force.

Nothing. They're a simple piece of equipment that perform very well.

I use this together with the droop compensation adapter for Diana guns (I have a 34). It's as though they were made for each other.

They are light, and hold tight so far.

Heavier screws, these seem very light duty. The slot studs should be just a little thicker as well as there is a little slop in my base with these.

Great rings for the money! Work extremely well with the UTG mount. They hold tight.

Nothing!

Hard to beat these rings for their cost and quality. I have them mounted on my RWS 350 Magnum. The scope hasn't moved a bit yet.

well manufactured, holds tight, just the right height for a scope with a with a 40 mm objective. like how the clamps that grasp the scope rail are under constant spring tension. GREAT PRICE!

mounted a 4-16 centerpoint scope with these on a savage mk 2 rifle. the problem with the mounts that came with the scope were that they were to high, so i bought these to replace them. hitting targets 200 yards away with a .22 lr

Design and strength.

nothing

These work great on RWS 350 , 34 and 52 with the UTG DN460 base. Very solid mount.

I really like these low rings and they stay tight on my RWS 350 magnum.

have you got yours yet?

Rugged, tape on inside of rings, good pricing.

Just add a little comment that thread locking material may be required when using on RWS 350.

Don't hesitate to order.

A strong solid mount highly recomend. very well made for the price its hard to beat.

nothing

This will hold upto magnum airgun recoil

Price.

Nothing.

They work. You need these if you use the adapter base.