Date: 17/8/2018 3:26
0

Air Venturi Feinwerkbau Mainspring, Fits FWB 124 Air Rifle reviews - page 1

Average Customer Review

5.0 (3 reviews)
4 star3 star2 star1 star
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By Daniel from USA on 2011-07-11 21:39:04

Things I liked: I put this spring in my .20cal. Beeman R10....fit nicely and jumped the velocity back up to 750fps with H&N FTT 11.7gr

What others should know: I used this spring at the recommendation of PA's service department....we were attempting to remedy the fact that the OEM springs are quite brittle....I've gone through 5 of them! More coils (39 vs 34) means less stress on each individual coil. So far... so good. However, if your OEM springs fit real tight (diameter), this solution may not work.

The most helpful critical review

0 of 0 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By John from USA on 2014-05-19 05:32:50

Things I liked: Ready to go right out of the box

Things I would have changed: Nadda

What others should know: I put one in my FWB124D and got a very consistant 765 FPS

Sort by:
  • 5.0 5.0

    5.0 5.0

    By John from USA on 2014-05-19
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Ready to go right out of the box

    Things I would have changed: Nadda

    What others should know: I put one in my FWB124D and got a very consistant 765 FPS

     
  • 5.0 5.0

    5.0 5.0

    By Dusty from USA on 2014-05-06
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: This spring increased the performance of my 124 considerably. Better than new.

    Things I would have changed: nothing

    What others should know: Be VERY CAREFUL when installing this spring. Make certain you know what you're doing, and make sure your compressor can handle this job. Don't lose trigger spring - it will fly away..

     
  • 5.0 5.0

    5.0 5.0

    By Daniel from USA on 2011-07-11
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: I put this spring in my .20cal. Beeman R10....fit nicely and jumped the velocity back up to 750fps with H&N FTT 11.7gr

    What others should know: I used this spring at the recommendation of PA's service department....we were attempting to remedy the fact that the OEM springs are quite brittle....I've gone through 5 of them! More coils (39 vs 34) means less stress on each individual coil. So far... so good. However, if your OEM springs fit real tight (diameter), this solution may not work.

     
Navigation