Air Venturi Tune-In-A-Tube Airgun Lubricant

I had 4 older .177 cal springers that had never had any spring treatment and were accurate enough but too twangy to really enjoy. Treated with a LIGHT coat of T in a T and it felt like I just got 4 new r ifles. After shooting to spread the lube I resighted all four and cut my group size by nearly half ! And what a pleasure.

Put it in a clear tube with gradations and a longer "tube nose applicator". And yes, it is overpriced but I still did 4 guns and have enough left for maybe 6 more.

Use it on the pivot points while you have it taken down. Works great.

Simple quick tune and u don’t have to use a spring compressor makes cocking smoother better accuracy and it’s a little quieter!

Nothing

If u have a springer that needs a tune this stuff works!

Application of this to my Crosman Optimus produced incredible results. This stopped the twang immediately and smoothed out the recoil to a manageable level. I highly recommend this for any springer. It is well worth the price and I have plenty left for other springers.

Add length to the nozzle to reach further into the spring chamber.

Easiest way to tune a break barrel metal spring airgun. Amazing how much it reduces shot cycle vibration.

A longer applicator snout would be handy for some rifles when stock removal is a problem.

This is my second purchase of this magical product.

Wow! This stuff surprised me! I thought,such a little tube... But it doesn't take much! What a difference it makes!

Absolutely Nothing!

I have a hard shooting, twangy, Winchester 1100ss and this Tune In A Tube calmed it and made it wonderful.
The tube looks small, but the grease comes out in a thin line,and it doesn't take much! Can't wait to try it on some other springers.

Easy to use. So far so good.

Nothing. It is what it is.

I've used this product on 3 spring rifles so far. I shot all three over a chronograph first to test speed. Then used this product and shot all 3 again with the same ammo over the chrono.
One rifle went up 2 feet per second. The other two shot the same. This product did take out the spring vibration and made the shot cycle quite pleasant. So bottom line...this is a spring lube in a tube...I'm sure the more I shoot, the more I will notice it working as described.

I like this product and it has worked just as it claims. If though you have old GAMO spring piston guns like me and i put in the GRT 3 triggers years ago and loc-tite the action screws and ended up with pretty nice guns, but they still had some spring buzz & one with a little worse torque. This product used properly will absolutely change guns like i described into well behaved pleasant to shoot guns. CAUTION! Use it sparingly as using too much will slow a gun down my gamo big cat is no longer pushing non lead supersonic and its not that big a deal as it also had the worst torque & buzz, but i am new to this product and i should have taken it in stages. I am however so pleased with the results and in the case of my Shadow Supreme .22 i don't think it lost any power. The real change in shot cycle is that these now feel almost like gas spring shot cycle with the spring power curve.

Make nozzle longer and put clear numbered hash marks on the plunger. Include some comprehensive instructions on level of use and likely outcomes that can be expected and what to do in cases where restricted access causes difficulties in application.

Not enough room here with my big cat i should have been more sparing with application, but as it was my first use and i had bad access to opposite side of spring and no hash marks on plunger. Take your time and do it in stages as this stuff is far more effective than it looks. So if like me you are not set up for doing an actual tune you want to avoid using too much so you will be rewarded by being cautious and removing the action using a little reassembling shooting and then doing it again until you get a result you are happy with. I cant say what your results will be, but my results were taking two rifles that required serious use of the artillery hold to have a chance at a squirrel at 35yds and now i can use grip the forehand to direct and steady. I wish i had a chrony so i could give more definitive results also want bench, tools & spring compressor and space for all that.

Use sparingly to all parts of spring. Great for those not mechanically inclined enough to disassemble gun..

Possibly a longer nozzle

This in no way replaces a fine tune the best tune is complete disassembly cleaning polishing and lubrication.

Great for those not mechanically inclined especially to remove one of those Hatsan trigger assemblies...

Possibly a longer nozzle

This in no way replaces a fine tune the best tune is complete disassembly cleaning polishing and lubrication.