SIG Sauer P226 X-FIVE Airsoft Review by RFR - episode 17

how is the trigger ...
Sat Sep 17 11:29:48 EDT 2011

how is the trigger pull? i like my trigger pull pretty light
By 山田勲

@TheCaboose36 Not ...
Mon Feb 13 22:55:01 EST 2012

@TheCaboose36 Not sure. Ive sent an email to our tech dept to have them look into this. Will post back when I get a response. - The Pyramyd Air Team
By pyramydairsoft

@wvairsoftsniper ...
Sat Feb 18 01:00:14 EST 2012

@wvairsoftsniper You're very welcome. For starters, you'll probably want to make sure you've got a good scope to go with your sniper rifle, obviously. A ghillie suit might be appropriate, depending on your style of play. Perhaps one of the most important tools of a sniper is a good set of comms (2-way radio) to relay intelligence on enemy activity back to your team. There are some that say comms are more important than the sniper rifle. - The Pyramyd Air Team
By pyramydairsoft

Is there a button ...
Mon Feb 27 21:53:23 EST 2012

Is there a button on the other side of the gun that you need to hold down while you push the take down lever 90 degrees to take of the slide?
By TylerZ953

@superjew837 yep! ...
Mon Feb 13 22:39:03 EST 2012

@superjew837 yep! Check the link in the video description for the full details. - The Pyramyd Air Team
By pyramydairsoft

Can anyone tell me ...
Sun Jul 10 14:21:31 EDT 2011

Can anyone tell me if ( SIG SAUER P226 Metal Slide Soft Air Rifle ) is a gas blow back airsoft pistol?
By ishowyouapple

it should be KWC ...
Thu May 10 10:48:31 EDT 2012

it should be KWC manufactoring this X5
By JustRockIt141

Hey guys great ...
Fri Feb 24 21:58:29 EST 2012

Hey guys great review! I have this gun too. But I have a question. I have been using it ever since christmas and havent had a single problem up until now. Once I put in a new Co2 into the mag it leaks out the rubber hole just behind the feed lips. I tried slowly tighting the screw but even then it would spray out. Any ideas on how to fix this?
By armalife

Is it full metal?
Mon Feb 13 15:16:10 EST 2012

Is it full metal?
By Ethan Guttman

Should I put ...
Sun Apr 10 11:18:33 EDT 2011

Should I put pellgun oil on the co2 before I use it? Or could I just use silicon oil on the co2?
By Sting3733

Can you guys please ...
Tue Jan 17 20:49:52 EST 2012

Can you guys please tell my the compatibility of this gun with Tokyo Marui/KJW green gas mags? I would like to use GG/Propane to lower the FPS to stay in the FPS limits of my CQB field.. Thanks guys..
By TheCaboose36

@ishowyouapple I ...
Sat Sep 10 22:27:32 EDT 2011

@ishowyouapple I believe he is talking about the spring version of the p226 made by Cybergun that has a metal slide. That version is not gas/co2 powered and is significantly cheaper than this one. So, it's not a blowback.
By Yahooblue42

@paddyspoint2 Any ...
Wed Feb 09 15:47:53 EST 2011

@paddyspoint2 Any time! To have the numbers right in front of you, even with the blowback, this pistol shoots approximately 60-70 rounds per co2 cartridge. You can get a box of 15, 12 gram co2 cartridges for $11.99 on our site. That gives you roughly 1,050 shots at about a penny a round. We offer a full line of gas airsoft pistols as well. If you go to our site and click on airsoft, you will see a separate category designated just for co2 airsoft guns and gas airsoft guns. Pyramyd Air Team
By pyramydairsoft

Mine came with ...
Thu Jun 30 13:13:33 EDT 2011

Mine came with metal bbs and doesnt have the orange tip, makes it look sic
By gerardo reyes

@TylerZ953 Not ...
Thu Mar 01 03:50:23 EST 2012

@TylerZ953 Not entirely sure, but it is possible, based on the photos from our website. Although, when I had the regular 226, I was able to just flip that lever down to take off the slide, without having to push down any button, from what I recall. But I could be wrong. Good question though! - The Pyramyd Air Team
By pyramydairsoft

@Nuukiboy I believe ...
Sat Feb 18 01:01:11 EST 2012

@Nuukiboy I believe it's just the standard 20mm Picatinny rail size. - The Pyramyd Air Team
By pyramydairsoft

how many shot can ...
Wed Oct 05 11:32:04 EDT 2011

how many shot can it shot on one co2? @pyramydairsoft
By frode508

@frode508 A boat ...
Tue Oct 11 22:21:31 EDT 2011

@frode508 A boat load. Probably like 40 to 50. Although it might shoot more if you eat your vegetables and excercise proper gun safety.
By pyramydairsoft

@deaf719wow There ...
Mon Feb 13 23:00:54 EST 2012

@deaf719wow There is a compatible mags section towards the bottom of this gun's product page on our site (link in description above). Otherwise, if you search for the product number, 3125, you'll pull up the compatible magazine. - The Pyramyd Air Team
By pyramydairsoft

Do these magazines ...
Fri Feb 11 21:48:02 EST 2011

Do these magazines work with other KWJ Sig Sauer P226 airsoft guns? I was thinking about getting the KJW P226, since I already have the X-Five you reviewed here.
By Rainbowsixoperator1

I just ordered this ...
Thu Feb 16 22:30:53 EST 2012

I just ordered this gun yesterday. Thanks for the great review! I'm a sniper and needed a solid sidearm for sticky situations. What other gear would you recommend for a sniper? Thanks!
By Mitchell Hatfield

@pyramydairsoft oh, ...
Tue Feb 08 21:03:35 EST 2011

@pyramydairsoft oh, that's not very cost efficient. :( thank you for replying!
By Paddy Pagcaliwagan

@TACADD You are ...
Tue Feb 08 17:05:49 EST 2011

@TACADD You are welcome and thanks for the compliment! We are still a growing channel, remember to share your favorite RFR videos with other airsoft enthusiasts and on Facebook. Thanks for watching, Pyramyd Air Team
By pyramydairsoft

Will this fit in a ...
Mon Mar 25 14:50:11 EDT 2013

Will this fit in a Blackhawk Serpa holster for the real gun?
By UnrelatedNonsense

@FCzenitSPB ...
Thu Mar 15 03:34:41 EDT 2012

@FCzenitSPB Unfortunately, I don't think either side of that orange tip fitting is threaded. The visible portion definitely isn't, if that is the side you were wondering about. - The Pyramyd Air Team
By pyramydairsoft

Shop at Gun Mall
Shopping Cart Items

    CheckoutSubtotal (USD):
    does not include shipping and tax

    Back to Top