@ablahblah54 ok ...
Tue Oct 18 10:33:15 EDT 2011
@ablahblah54 ok thank you but do you know what lasers might fit this gun or even if it can be attached with a mock silencer would i need and adapter or is the orange tip or the barrel threaded once again thank you in advance
What about the ...
Sun May 06 12:53:26 EDT 2012
What about the rotating barrel?
By Orion DeWitt
Mon Sep 26 16:31:20 EDT 2011
@AniMaLL7PrOduCTioN I do know, but I didn't bother checking it. But if you start bitching, it is HK3P. So I was right.
By Tommi Honkonen
Tue Sep 27 19:10:36 EDT 2011
@AniMaLL7PrOduCTioN to bad the px4 is made by Beretta
@haplo0879 The ...
Fri Mar 02 00:11:12 EST 2012
@haplo0879 The valve knocker engagement latch is extremely annoying on the WE PX4. Tthere's this silver piece sticking up on the body that the slide engages when racked. That piece lets the valve knocker fall to firing position. After decock, (pulls knocker and silver piece up), the piece should drop down again on a hair (should drop down on a DA pull as the hammer lets off the knocker), though mine doesnt engage at times like yours. Best I'll do is open it up, lube, clean (too much oil = bad).
Tue Oct 11 22:26:34 EDT 2011
@ifishupright Interesting tid bit. You may actually be correct. Thanks for sharing.
Good vid. I have a ...
Sun Dec 11 14:46:49 EST 2011
Good vid. I have a few questions. Is the gun compatible with marui PX4 Magazines, and will it be compatible with a marui lower frame and hop up unit?
Tue Oct 11 22:27:24 EDT 2011
@TacticalReviewer Good to know. Thanks for the feedback.
These reviews are ...
Mon Sep 26 15:13:39 EDT 2011
These reviews are great! I like that you go over all the features in depth in all your reviews and the quality of them are good. I would buy these guns from your site but I've found other sites that are much easier to use, I would recommend tuning up your site sometime soon I'm sure it'll raise you online sales.
By Dylan Stembridge
I like these guys! ...
Thu Apr 12 04:10:31 EDT 2012
I like these guys! Honest, not showy, no random bimbos to sell guns...just a nice informative review! Little critique though, perhaps the gun could be shot from a rested, stable position to truly test the accuracy of the machine itself and not the shooter? (although that WAS some good shooting!) :)
@pUrpLEsnake325 Get ...
Tue Oct 18 01:34:58 EDT 2011
@pUrpLEsnake325 Get this, the quality is reported to be very near TM in performance and build quality. As WE actually isn't the OEM of this gun, rather, a company called HK3 located in Hong Kong, it doesn't carry most WE qualities in it. The only drawback is the relatively low FPS that it fires at, but the range is still excellent.
Though I am unsure ...
Sun Feb 24 23:10:38 EST 2013
Though I am unsure of the exact compatibility between the two companies products, I know many of the WE guns do in fact use the same/similar components as their TM counterparts. - Tom Pyramyd Air Team
Tue Sep 27 14:04:05 EDT 2011
@AniMaLL7PrOduCTioN I don't believe you and IF it was Indian or Russian that wuoldn't make it WE. So, once again I was right.
By Tommi Honkonen
You can apparently ...
Tue Feb 19 17:48:17 EST 2013
You can apparently use Tokyo Marui parts in this.
By Nathan Leyrat
Tue Oct 11 22:26:54 EDT 2011
Tue Sep 27 13:42:10 EDT 2011
@AniMaLL7PrOduCTioN Why do you think I am wrong? HK3P is company from Hong Kong as the name says.
By Tommi Honkonen
@MrJmak223 Should ...
Mon Jan 02 22:06:20 EST 2012
@MrJmak223 Should be. The Marui PX4 is probably what WE/HK3P used to reverse engineer their model. Thanks, The Pyramyd Air Team
@whatever50550 It's ...
Tue Oct 18 01:33:26 EDT 2011
@whatever50550 It's a clone of the TM, not the actual TM. Also, Evike decided to import them here at a low cost, $100 instead of the $120'ish it'd be with overseas shipping.
Okay, soo...from ...
Fri Mar 02 00:12:52 EST 2012
Okay, soo...from ASGI mine came with a weared out slide and the blowback mechanism's stopper well, blew off (see what I did there) after a month of usage on duster gas. This is ridiculous, and nowhere near ASGI quality. However, I see this one guy on Evike with what appears to be a similar issue. Suspicious...oh well, I'll just have to go and find myself a genuine TM slide to be safe then.
@Zoidsguy11 have ...
Mon Nov 14 15:30:24 EST 2011
@Zoidsguy11 have you checked out website recently? We keep our pages updated with the most up-to-date estimations on product arrivals, which are provided to us from the manufacturer. - Pyramyd Air Team
It's not WE, it's ...
Mon Sep 26 14:48:18 EDT 2011
It's not WE, it's H.K.3 P or something.
By Tommi Honkonen
Mon Jan 02 22:05:16 EST 2012
@randomocityvideos Not right out of the box. I don't know that any of the manufacturers have aftermarket parts for these guns available yet. It's a shortened M9 platform though, so it may be compatible with M9 barrels. Thanks, The Pyramyd Air Team
Sun Mar 04 13:02:53 EST 2012
@pyramydairsoft Would it be able to take an M9 mag? I know there are a few M9 CO2 mags on the market...would that work?
By Solace GrayArc
Wonderful review, ...
Fri Mar 09 00:40:15 EST 2012
Wonderful review, guys! Well edited.
@ablahblah54 thanks ...
Fri Mar 02 17:00:22 EST 2012
@ablahblah54 thanks for the good info!
By Pete Houghton
does not include shipping and tax