Call 888-262-4867 toll-free and we'll answer your questions. Hassle-free online buying. Order by noon Eastern & we ship the same day (weekends & holidays excluded). Some orders excluded.
So, are you looking for a fresh take on airguns?
Some new information, perhaps?
Check out our daily report!
Monday thru Friday find new topics about air guns, BB guns and airsoft guns. Ask your questions by clicking on the comments link at the bottom of each post.
$25 eBillme Rebate! Receive $25 by mail on orders of $100 and over when you checkout with eBillme. Valid for first use of eBillme only. Offer valid from October 9, 2009, to January 5, 2010.
Download the rebate form here.
Same day shipping exempt
This item doesn't qualify for Same Day Shipping Exclusions include but are not limited to international shipments, haz-mat products, special order items, orders with out-of-stock items, orders needing customer verification for processing, orders for technical inspection or product installation.
By Edmund from USA on 2009-09-13 02:02:38 - See all my reviewsAdd comment to this review
Things I liked:It's quieter than the 24" barrel. It works on CO2 and surprisingly well on 3,000 pounds of air. Things I would have changed:Bushings are poor. I see why some people modify them. In my opinion they are too loose on the barrel and should mount into the frame with o-rings on the outer surface of the bushings. What
... Read MoreThings I liked:It's quieter than the 24" barrel. It works on CO2 and surprisingly well on 3,000 pounds of air. Things I would have changed:Bushings are poor. I see why some people modify them. In my opinion they are too loose on the barrel and should mount into the frame with o-rings on the outer surface of the bushings. What others should know:The front bushing was loose to begin with and no matter what I did to align it with its set screw, it just won't align with the frame holes and the other bushing. So I loosened the rear bushing and was still unable to align both bushings with the frame set screws. I settled on leaving the front bushing screw loose so I could get the alignment holes in position for the 2 frame set screws.
