Page 7 - Crosman Silicone Chamber Oil Reviews

Works very well

Bigger tube

You only need 1 drop in chamber.

works as advertised

health care

One drop in chamber after 200-400 shots and good for oiling rest of gun too!

The small tube is a reminder to use only one drop. It is adequate for many applications and takes up little room in the shot bag. This is at least as good and maybe better than any other chamber oil on the market.

The label should warn users to use only one drop IN LARGE LETTERS. This stuff resists dieseling, but not if you put in two or more drops. It shouldn't ever diesel, but it does. What may be happening is it gets hot enough to ignite residual lubricants that get into the chamber from other parts of the gun. Or maybe it has some volitile fraction that can ignite. I don't know. Then again, every other chamber oil I have ever used will diesel - if you overdose with it.

When you open a new (250) tin of pellets or every 200 rounds, whichever comes first, put only one (1) drop in the chamber. Dieseling from a little too much oil is not usually a disaster. Most guns will handle a limited amount. However, it tends to foul the barrel and even leave lead in the barrel. That wrecks accuracy. Sooner or later, it will blow out the seals. Avoid it if you can.

works well

none

pyramid air is great.quick order shipment.good communication.wish all companies were like this!

works well.unlike other reviewers,i feel size is fine since 1-2 drops is all you use.will last a long time.

nothing about product needs changing.

pyramid air is great.quick order shipment.good communication.wish all companies were like this!

Seems to work as advertised.

I'm with the several other reviewers who call for a better (larger and non-leaky) conainer. I think a 1 ounce bottle would be about right.

It's the oil you gotta have for a "Springer", easy to use, and IT works as it should

Changing the Cap a bit, make it fit tighter without leaking ( at least mine does )

Get it..you will not be sorry, and your rifle will last so much longer. My personal opinion, Stan Reeves

Slick slick slick. Works like a champ. Keeps my rifle up to par.

I'd put 2 to 3 tubes on a card and reduce the price as such. ie: 2@$9.50 or 3@$11.75. Then, the mfr. would'nt have to make a larger tube size as a lot of folks would like.

Super product

i like how they tell you the base of the product (silicone) most dont tell you silicone is safe to use for chamber oil.good stuff

nothing

works on all 8 of my guns great. dont over use.

It works very well. I do feel with this silicone oil, you really should ONLY use 1 drop. Not 2. All my rifles seem to be a little bit quieter, which is fine with me.

A Larger tube please.

As many others have commented, if you use to much, it will give a huge detonation. 1 drop only...That's plenty...Safe shooting everyone!

Works great in my Mendoza RM 2000. A couple of drops in the oiling port and your done for another couple hundred rounds. Gun fired a little smoother after oiling. No dieseling.

Keep it in stock. I waited almost three weeks for Pyramyd Air to get stock to fill my order.

An absolute necessity for spring air rifles.

I works great. Good for airsoft bolt action sniper systems as well. Plus it is cheap.

hmm. nothing!

You CAN use this as a lubricant for the bolt that goes into the airsoft sniper systems. This message is for all you snipers out thier.

Does what it is suppose to. Works great in my gamo shadow express

better non-leaking cap?

Buy it if you own spring guns!

Keeps the rifle shooting consistent . Manufacture recommended chamber lube for my rifle.

A warning label advising against overuse and the damage it can cause.

I put 2 drops in my gun and it only called for one. I used 2 because the chamber had never been lubed.. When i fired the rifle the next time i had serious chamber detonation, not mild dieseling, powerful (very loud) detonation that blew smoke 6 foot out of the barrel. The rifle still shoots well but im sure i shaved a few months off its life. Overuse of chamber lube is a BAD thing, read this PA blog entry to understand more about the event im describing. https://www.pyramydair.com/blog/2007/5/what-does-dieseling-mean-part-1/

1 drop in the barrel for every container of 200 pellets seemingly works very well,

this oil aint broke ,so dont fix it

after mayby every 200 shots shoot a cleaning wad or two through the barrel,then put a drop of oil in front of the pellet chamber in the barrel while you hold the barrel pointing down at the ground so it runs down the barrel a bit,then load a pellet and shoot it into your target and whallah your relubed.. you may smell some oil burn on high power air guns,thats normal due to the friction heat of the pellet zippin through the barrel,but dont over oil the gun,it may effect the barrel pressure and cause inacuracy,due to different pressures between shots.(hydrolicity)one drop evry 200-250 shots is all ya probably need.

Improved accuracy of my HW45. Also the pistol was not dieseling after using 2 drops of this oil and the sound level has come down.

nothing

if you have a spring airgun this is a great lubricant to have.

Recommended for all springers. As Crosman indicated for their guns' maintenance, 2 drops in the port every 300 to 400 shots, and the velocity is regained. Normally after 300 shots, you'll can see the velocity drops from the chronos on average about 10 fps. After a drop or two, the original velocity is regained. But over time, when the spring is wore down, no matter how much oil you use, the original velocity you first have will no longer be there. That's when the new spring is needed.

None

When the oil is used, the first 5 to 10 shots will increase the sound by 15 decibel. Once the oil subsided in the chamber and the barrel after the 10 rounds, the decibel drops again. Imagine a 95 decibel shot going off at 7:30 PM. Yeah, you would duck when you hear it. The neighbors' dogs go crazy after hearing it a few times.

Don't diesel, don't have to use but 2 drops. If you have an oil port that says 2, 1 in the port 1 down the barrel. No oil port ? Then 2 down the barrel and let it stand ( for me at least 6 hours).

Better lid on the tube. It leaks and at the cost for this leaky lube its not right.

Use this spareingly, hydrolic compression can be as damageing to you seal as over oiling. That's sound you can get.

Great product, after a few hundred shots, i applied a few drops. the sound when i fire my airgun is like i just bought it

An absolute necessity for any one wanting an working and maintained rifle

The price and size, it took a lot of digging to find this little tube, makes the air gun louder

Don't go overboard with this you shouldn't have to use it verry often maybe a drop every 1000 shots.