UTG Deluxe Tri-Rail Barrel Mount Reviews

Installed easily onto the barrel of my AK47 to mount a forward handgrip. Buying another to mount a bipod. Excellent

concept is a good one

It did not fit(to small) the barrel on my Benjamin trail np. I didn't think it would be a problem when one of the reviews that I read said they put it on a shotgun and the online help I received from Pyramyd said that it may be to loose.

Solid construction,3 different lengths of bolts for various barrel diameters, and lightweight.

Only thing I could think it needs is some kind of protection for the barrel, so it doesn't get scratches. I used a piece of a rubber bladder, slightly thicker than a bicycle inner tube.

Unfortunately PA did not include simple schematics in their description. I regretfully relied on reviews. One stated it would fit on a 1" dia. barrel. It does not. Length: 30mm. Barrel/laser dia. range: 13mm-20mm. This product is now on my Gamo Hunter 440. Unentended consequence makes it a little more barrel heavy, so the artillery hold seems more stable.

This is a basic perfect accessory it allows you to mount a sight and light to guns that do not have a provision to do so.

Nothing" There is nothing to change,It is perfect and will aid in mounting acc.

Bare Bones simple"

AI mounted it on my Hatsan 125 Sniper Vortex barrel for a tripod. Great fit and stable

None

Great product

Came with a variety of screws in different lengths. A must have for mounting a Bi-Pod on a Break-Barrel. Solid construction.

Nothing

Same manufacturer has a 5 slot position model available. PA should consider carrying that model also.

Did just what it is designed for!

nothing.

Can't go wrong for the money!

I like that it can be mounted from either side. ...that's what she said.

I've already changed it on the milling machine, to accept a home made bi-pod. Quite sturdy though, it should do just fine in its new configuration.

It's very versatile and rugged.

The options it gives you to mount accessories on your barrel.

get rid of the bottom tube for shotgun magazine feed tube.

a must get for break barrels.

This is an awesome rail. I have this on my uzi and it amazing. Pyramid is a great place to shop. Love it.

nothing

Its a great rail

Excellent product!! You can adjust in many size and configurations.

Nothing.

You must use a cloth to protect your bore.

Worked perfectly. Bought it to install a small centerpoint laser on the barrel of a Ruger 10/22. It went on easily and fits well. No problems.

It fits on an old single-shot Remington .22 I use for shooting rats at night. I was able to mount the Crossman flashlight with remote pressure switch easily and now I regularly get 8 to 12 rats an evening in the boatyard. 2 or 3 previously.

Perhaps twice as long, to fit dual rings.

The versatilty is good. Being able to mount a lazer very close to the barrel center worked out well. These are well constructed, with spare allen head screws.

I would have several different size rubber type bushings with the mount, so it would not rub the blueing off the barrel on its inside flat areas, when it is securely screwed down

This thing with a combat light really hangs down

Easily adjusted to air-gun barrel size with the variety of screws provided. Low barrel mount profile enables mounting of flashlights and lasers without interference with the open sight.

Agree with the comment they should add cloth tape to avoid barrel scratching; however, in my case I am more concerned with no slippage, so I did not add tape.

When mounting a flashlight laser combo (FLC), I initially thought I would have interference with the thumbscrews and one of the rails; however, with a little finesse it worked fine.

Nice compact way to add three short rails anywhere you can clamp this thing, plus space for a small laser or flashlight.

The maximum diameter is about 21-22mm, so this doesn't fit on many shotguns or other thick barrels.

Comes with a pile of bolts in three different lengths depending on what you're clamping.

Good price. Well made. Lots of different size screws to choose from.

Scope tape or some sort of material on the inside to protect your barrel.

I used this mount on a single shot 12 ga shotgun so I could mount a flash light on it for home defense. It works well and is very easy to mount.

Rock solid, good value. Comes with many different size screws to accommodate almost any size barrel.

Lockers? but not a big deal. Maybe some cloth tape on the inside to prevent scratching the barrel.

i put a piece of cloth around my barrel 1.) To prevent scratching my barrel 2.) when its mounted metal on metal it will shake itself loose. Make sure you tighten the screws really wel too or it will rattle itslef off after about 70 shots

everything

nothing

Great way to mount a bipod to any rifle without QD swivels. I used mine to mount a UTG bipod on a BAM B30. Great addition to any heavy sidelever springer, or PCP rifle.

works great and with a little modification will work on the Crossman 2289

nothing

buy 2 makes a great scope mount for rifles without scope rails