

Beretta Laser, Fits 92FS Pellet Pistol
PY-A-1790
Not Available
View more products from Beretta
Description
- Laser
- Fits Beretta 92FS pellet pistol
- Clamps under the barrel
- Screw mount
- On/off LED indicators
Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.
Overall Rating
Review This Product
Tell us what you think
9 of 9 Beretta Laser, Fits 92FS Pellet Reviews
Well made, easily attached, easily sight adjusted, fits the Beretta 92FS like a glove
Things I Would Have Changednothing
What Others Should KnowThis is my first Laser sight, so, have nothing, to which, to compare. I can only add, it did improve my 30 ft target groups. This is more of a curiosity purchase as I've never used Laser Sights. I still think, learning to use "steel sights" is best.
This is a great laser sight. It make hitting the mark much easier than the open sights. Once you have it sighted in it is very accurate. I have it on my Beretta 92FS and love it.
Things I Would Have ChangedI can't think of anything I would change on it. The on off switch is right in front of the trigger and makes it easy to turn on or off.
What Others Should KnowOnce you sight the laser in on your gun you won't have to do it again. It's a very good laser and has a bright red dot and the pellet will hit the red dot every time if it's sighted properly.
very accurate
I love this laser. After I zeroed it in, it was very accurate. You can see it for at least 100 yards.
Things I Would Have ChangedNothing.
What Others Should KnowIt's a lot of fun to shoot with this laser.
Well built and a true custom fit.
Things I Would Have ChangedNeeds to be supplied with a remote-mountable pressure switch in addition to, what I have found to be, the inconvenient to use slide-type on/off switch located on the right side of the unit.
What Others Should KnowI would have rated this laser higher if it was designed to use a pressure actuated switch as has become a virtual standard with other laser sights today.
You need this stuff if you have rats running on your roof at night.
Things I Would Have ChangedIt doesn't look sexy, it lowered the guns expression, it lacks creativity, it over covers the gun so much that the gun is no longer noticed from a close distance! Looks like the designer of this product was a fat ugly depressed person.
What Others Should KnowWorks great, get it if you need a laser for your Beretta.
The things I like about this laser, is that the top half that mounts to the gun is metal. Laser appears to be bright and is light weight,and the switch is very easy to turn on.
Things I Would Have ChangedMaybe make it multi fit so you can use it on other air pistols.
What Others Should KnowI have not mounted this laser on Beretta 92FS yet. It does appear to be worth the money I spent on it. It maches the pistol grips, and has lights on the rear to let you know it is on. I will write another review after mounting on my Baretta and sighting in.
Product was exactly as described. Set up was simple too. Sighting is dead-on!
Things I Would Have ChangedNothing
What Others Should KnowA worthwhile investment for your shooting pleasure....
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.
View Shipping Times
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 21+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
May 14, 2019
By PAUL
VERY NICE REPLICA. I HAVE NOT SHOT IT YET, BUT DID BUY THIS LASER. MY LASER BORE ALINMENT TOOL I SIGHTED IN THE SIGHTS WHERE RIGHT ON WITH THE LASER BORE SIGHT .
Things I Would Have ChangedMAKE 90% METAL , NOT ALL PLASTIC. ONLY METAL IS THE ATTACHMENT. MAKE THE SIGHTS WITH ELEVATION AJUSTMENTS
What Others Should KnowONY USE WADDCUTTERS AND THERE ARE SOME BLUE PLASTIC SHIRTS WITH A NICE METAL POINTED TIP . GREAT FOR SELF PROTECTTION .