UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift

I have a Mod. 36 made in 1998 that has lots of droop. This was a perfect solution to that issue. Works like magic. This gun has always been very accurate, now my scopes don't need shims.---HOORAY

nada

low to med. rings will work better than high ones for the most part, unless you get the UTG scope with 53mm obj. lens.

Nice piece of hardware but did not work for my 1980 something model RWS DIANA 45 MODEL. Scope ran out of down adjustment before it could be zeroed. I actually turned it around backwards and it worked better that way. Now had to use quite a bit of upward adjustment but i was able to get it zeroed in.

In description, it should let RWS DIANA model 45 owners know that droop compensation may be to much depending on which model year thier gun is.

fixes barrel droop on Diana 34 22 cal

nothing

Bought a new Leapers 4-12 scope that was set at factory Zero . Using a leapers mount it shot 17 inches low at 30 yards and 3 inches left. As I did not want to try to adjust that much drop on a new scope so I bought this base and a set of weaver bases . Now it shoots 3 inches high at 30 yards , 3 inches right and is in my comfort zone of scope adjustability

Easy to mount, good fit, solid, my RWS was a mount eater, this stopped all that, plus it helps with the barrel droop problem.

Nothing, the guy that thought this up had a really good idea.

Don't waste your time trying to mount a scope on the existing rail get one of these and some weaver mounts and do it right, save time and money in the long run.

It worked great on my RWS 36. I've shot over 500 rounds in using this mount and my scope it still zeroed in.

It would be nice if PA would lower the price to Leapers suggested retail price. I would have given 5 stars for the value for the money if the price was lower.

The mount sets the scope on the high side so you should use the lowest scope rings you can.

Great looking finish, included wrenches.

When installed following directions, ramped area on my RWS45 inclined mount above clamping plane. Had to shift mount forward 1/4"+ to allow clamp to engage dovetail. Maybe my old 1985 RWS45 build varies from current models. Will search for different mount.

If it fit, would be a great mount . Doesn't work for my old mdl 45. Will put peep sights back on.
Solution: ordered an FX Indy PCP . Big Grin!

Sturdy construction easy to use.

Nothing.

I tried this on my 34 and it over compensated for the droop my barrel has. So i did not even use this. Be sure to ask questions before you buy to see if this is even needed.

Good solid construction even though its light weight. The mount base serves it function ,that is : to eliminate the problem of barrel droop in relation to the sighting and adjustment of the scope. I have mine mounted on a Diana 350 classic Feuerkraft .177- at plain view I couldn't perceive droop in the barrel of my rifle,but once mounted the scope it would bottom out and POI - point of impact would go hay wire,the problem being that it would loose the adjustment power in its internal springs. This mount is the solution for my rifle and the other models enumerated. My 350 classic came TO5 trigger.

Nothing

Barrel droop is hard to see with plain eyesight,but if your rifle has pronounced droop,you may be able to see it by lifting your rifle in front of a mirror that is large and has a straight horizontal top. Align the compressor tube with the top of the mirror and you will probably see the downward drop of the barrel- not much in terms of size ,but a cliff when it comes to adjusting scopes.

Fits great on my break barrel Diana model. Keeps the scope from any movement. Also works for my martin 22. Nice rail and worth the money.

Works and fits perfectly! I had a real drooper that was way out of scope adjustment range. This mount brought the point of impact up about 7 inches at 10 yards on the indoor range, so the 20.7 inch advertised droop correction at 30 yards seems to be right on.

Nothing

Also works on RWS Diana 34's with the T01 trigger and factory rail.