Roll over image to zoom in
1-year limited warranty
Earn 10 Bullseye Bucks
List Price $12.99 Save $990.00 (99%)
Diana Stormrider Barrel Band
Replacement Diana Stormrider Barrel Band. Use this OEM part to mount your rear sight (sold separately) or as an extra barrel support.
Create an online review and share your thoughts with other customers
Things I liked: If you have a Diana stormrider this is a must have. I was having problems sighting in my scope. I could not get a consistent grouping I think there was to much play in the barrel. Once I put the second barrel band on my rifle I was able to get all my shots in the Bulls-Eye.
Things I liked: It works to provide more barrel support.
Things I would have changed: Remove lower lug and remove the top piece. Many people buy this to provide much needed additional support for the barrel and this is the piece that mounts into the stock and supports the front sight. A simple figure eight would be better for this use.
Things I liked: Makes the airgun look better and more secure for that extra hold near the tip.
Things I would have changed: Only thing I would want is to be able to put a swivel stud through the hole at the bottom where the screw go through, would save me from putting a hole on the stock for bipod/sling attachment.
What others should know: As I am a noob to this I had trouble getting the baffle off, the screw under it was seal really tight, so I went and took the whole barrel off to install it.
Create an online review and share your thoughts with other customers. Show Other Reviews
I own a Storm Rider and am interested in adding a scope. I know it needs a compact scope, so I bought a 3x9-32 Bug Buster for it . Is there a way to remove the rear sight from the installed barrel band, or do you have to buy the one above w/o the sight and install it? Thanks, Wild Bill, Pa.
Sure, rear sight is easy to remove. First remove the screw in the top of the rear sight. Then take a mallet and tap the sight either from the front or the back and it will slide off the rail.