90-day limited warranty
Earn 120 Bullseye Bucks
List Price $179.99, Orig.Price $149.99 Save $30.00 (20%)
as low as $11/month
Legends Ace-In-The Hole Pellet Revolver
Show every paper target and soda can who holds the cards with the Ace-In-The-Hole!
An original design by Umarex Legends, the Ace-In-The-Hole is a full-metal CO2 sixgun that’s sure to turn some heads at the poker table, and even more out at the range.
With a style that wouldn’t be out of place in the vest pocket of a Carson City card shark, each Ace is stamped with the best in the deck---the Ace of Spades! With a trail weathered finish, load up your 6 pellets through the loading gate and up the ante out at the range. Practice your draw and shoot through the iron sights--or from the hip.
For a western-themed experience only Legends can provide—grab your sixgun and let those pellets fly!
|Max Velocity||340 fps|
Create an online review and share your thoughts with other customers
Things I liked: The heft of the revolver and appearance are almost spot on. Action was perfect after a puff of powdered graphite onto the trigger and hammer pivots. It harks back to the quality and care put into these revolvers like those of the first Colt SA CO2 revolvers brought out by these folks a few years ago. The grips with inlaid medallions are beautiful in and of themselves.
Things I would have changed: The manufacturer could add some molded in screw heads on the ejector side of this fine revolver and ditch the 'molded in bumps' they have where screws would normally be. The hammer has a sprung pin so I would assume that they are working towards having it lay flat in the frame as a standard Colt SA hammer would.
What others should know: The round portion of the frame that the hammer falls through had a couple of minuscule burrs on my example. A minute with a fine touch diamond file had them removed without altering the appearance of the revolver. This is a fine airgun for the cash outlaid and as noted before, any fan of the 'Expendables' should have this close copy of Barney Ross' revolver. ;o)
Things I liked: Just a bit unique, nice size for a plinker ...if you like Western revolvers, a nice addition to your collection.
Things I would have changed: What is the deal about 3 sights? The sight adds an interesting visual element, but I can not see swapping them out. Grip scales are a little frail feeling.
What others should know: A fun toy
Things I liked: The weight and appearance match the original 45 long colt. Fun to shoot.
Things I would have changed: would like to be able to remove the cylinder, but am comfortable with it as it is.
What others should know: May want to purchase additional cartridges.
Create an online review and share your thoughts with other customers. Show Other Reviews
Can I bob the hammer to be more like the other colts without it changing the fps of the gun?
It appears that the front sight is a spring clipped metal piece. (3 springy grips on the barrel) I don't recall that being the way the originals were made.
They werent.This revolver was offered in Europevas a Colt marked replica of the ported , front sightless revolver he used in that movie . For some reason they decided to add a trifled barrel to an Umarex version and offer it in the US. Initially a limited run it now appears to be a standard item . Rather than use a real Colt style barrel , with correct Peacemaker sights , Umarex went on the cheap and added a clip on sight. Figuring that the same company that wont offer the popular 4 3/4 barrel length,wasnt going to offer a nickel or blue revolver with correct barrel and sights, I bought s pair. Nice shootingas per my review , but would still prefer the correct barrel and a polished finish
Are there extra shells available to purchase?
Yes, this Ace In The Hole uses the exact same pellet loading shells that are used by all of the other pellet shooting Umarex Colt Single Action Army revolvers.
This revolver uses the Umarex
|Max Velocity||340 fps|