Page 2 - Air Venturi Quiet Pellet Trap Reviews

Keep your shots within the frame, & it's worry free shooting.

Have a removable top frame for it. Make it a little wider for further away shots, so the frame doesn't get hit. It could happen.

Not sure yet if there's replacement gel packs available for when the ones inside it get too many shots in them. Still wouldn't hurt to put something sturdy behind it to be safe.

Can use indoors

Lower price

I would offer a metal plate to be placed in the box ahead of the duct seal. I put one in mine.

In the photo I put aluminum strips around the exterior to save the box from errant pellets. I think this should be standard.

When this target is shot up you will have a good model for your own build.

Excellent pellet trap for indoor shooting!

The ballistic putty is not the full length of the trap. You need to put an inch of wood shim in there to level it off. But still well worth it!

I really like this pellet trap. It is exceptionally quiet and the dimensions are just right. I have mine sitting on the top step of a step ladder leaning against the wall and it is the perfect size.

I would make it a bit deeper as I get some paper chips coming out of the trap unless I continually use new cardbord backers.

This is a quality product. i highly recommend it. I am very happy with mine.

Good use of 'sound quieting' material

For the Price; could be much better quality (fit and finish)!

Target paper size showed this manufacturer's GREED!
Off-Size! Because of design, cannot a commonly sized 12 bullseye target (which is much cheaper and more readily available). Therefore must buy THEIR targets or forced to "cut down" size of common targets. "Cheap Shot", PUN INTENDED!

Great trap. Works Well. Worth the money.

I would strengthen it a little. Nail the backing on a little better, glue the seams, etc. Maybe change the size - see below.

WARNING: Only order replace target from Pyramid Air. Regular AR-5/10 12 Bull targets are 10.5 x 12 inches. The 11.5 x 13.25 AR-5/10 12 Bull Targets are a special order for Pyramid Air Only.

Love that it's sized for the NRA targets. It's handsome, especially after I added am antique brass handle which makes it much less clumsy to carry.

If you're shooting a high velocity air rifle the pellets will blow right through the "ballistic putty" and through the wooden box's back. I had to add a 1/8 inch piece of sheet steel ($15) to make it right. Ends up being rather expensive overall, but it suits my needs now.

Stops .25 cal from Hatsen sniper rifle no problem. If you miss the clay the rifle will blow right through the hard wood box. Works great. No ricochet problem. Stops everything.

Nothing. You can cut up cardboard to back the targets and keep the clay in. I would add a handle because it is fairly heavy and hard to carry.

Works well to stop whatever you are shooting. I would back it up with a piece of plywood in case you miss the clay.

Works as advertised, Quieter than other traps I have used, both boughten and home made. Sure stoppage of the pellets. Holds the targets well.

Atop handle would be a nice addition.

Expensive, but a very good product.

The price, most expensive wooden box I have ever bought.

You can build one for under $25 (this would be made of hardwood)

This trap is really great. I think the problems people are having with pellets getting through the putty material can all be avoided. First, take the putty out of the plastic it comes in. Second, pack it in to the base so it's one solid piece with even coverage. Regardless what the description says the amount of putty that comes with it is the right amount. Works great and really is very quiet.

I added a handle at the top like a few others have done. This really makes it much easier to cary. It is heavy so its kind of awkward to carry without a handle, especially with one hand. It is a little pricey but the putty is not cheap and it is a great product even for the price.

Make sure to install the putty properly and it will work great. I bought a sheet of foam board for a few bucks and cut out openings for the different size targets I'm using. Then I just clip the targets to the board and slide them in. I don't use the cardboard backing at all.

Quiet! Great for indoors or in the suburbs. Well built. Nicely finished wood.

Nothing.

When you get this trap, take off the cardboard front, lay it on a flat sturdy surface, take your fists and push the ballistic clay down, spreading it out. If not, expect a few holes through the back of your trap! Ask me how I know....

quiet

no squawks re: arrived broken give us the missing 1/2 block for repair/remolding etc

fine product... bigger would be better for scope adjust initial errors

quiet

lower price and re-enforcement for more strength

Th first time I used it, I had a tight 5 shot group that blew a hole through the back about the size of a quarter...using nothing more than 12FPE.

It is quiet and mostly well-made. Most of the pellets embed nicely in the duct seal material ("ballistic putty") which sits behind a cardboard target backing.

The back of the trap is made of very thin wood which fractures easily as the pellets fly through the seams in the three bags of duct seal. The biggest annoyance is that the 10M 12 Bull targets I previously purchased are too small for a secure fit. I have to use push-pins to secure the target. As others have said, there are only 12.5lbs of duct seal rather than 15lbs.

The "target backer" is actually just a piece of cardboard. I now make sure I cut replacement cardboard backers whenever I receive a large shipping box. The duct seal material is actually 2 1/2 bags of 5lbs each. Unfortunately, pellets can fly between the edges of the bags and into the trap backing. I've tried reforming the bags but haven't solved this problem. Make sure you purchase the 10M targets linked on the trap's web page so you get the right size.

It is an excellent product. Truly quiet, contains lead dust. Works just like it is supposed to.

I afixed a handle to the top of mine, a simple modification I highly recommend as it makes it so much easier to carry.

12.5 vs. 15 pounds of duct seal? The 12.5 is the correct amount to fill the trap.

My trap was not broken, it arrived in fine condition.

I would change the description from 15lbs of putty to 12.5, because 1 of the 5lb bags is cut in half.

It holds the targets and stops the pellets quietly, what else is there to know.

PyramydAir resolved the issue from my earlier review quickly and professionally. I have been using this with everything from a .177 pistol to a .22 R1 at 25'. Even a domed field target round from the R1 only penetrates about 1/3 of the way into the putty. Silent and clean, a great trap.

The 12.5 lbs of putty I received with the order.

The 2.5 lbs of putty I didn't receive...

Trap arrived with only 12.5 lbs of putty. One of the three 5 lb blocks was cut in half. No telling where the other 2.5 lbs went, but they didn't show up here.

Web page states "Includes: Pellet trap, 15 lbs. of ballistic putty, 1 target backer and 4 NRA 12-bull targets."

Trap survived shipment just fine.