Puncher Breaker Silent Walnut Sidelever PCP Air Rifle

Very accurate good heft . Although I received cracked magazines. I contacted customer service to get them replaced to no avail. My assumption is that they took the new mags out and gave them to another customer for a warranty replacement. I will be taking my business elsewhere for future purchases.

TO RECEIVE NEW, NOT USED DAMAGED MAGAZINES.

According to customer Rep Irvin these magazines Crack with use, well I used one four ti e and didn't use the other at all.

Price is great for the rifle you get. Comes with 2 magazines, although at point of sale, there is no way to buy more. Walnut stock is beautiful, but heavy. Fit and finish are above average. Everything was tight when it arrived. Shipping box has custom cut foam that did a great job of protecting the rifle in transit. Comes with all the wrenches needed to make adjustments. Rear cheek rest is comfortable, but it is not a riser, only moves forward and back, not up. Box announced that the scope rail has both 11mm dovetail AND picatinny, which is false, it only has the picatinny. Side lever smoothed out after about 500 shots. Sear set screw needed to be lightened to get it from 4lbs trigger pull down to ~1.5 lbs. Love the external power adjuster, but wish it had clicks like a scope adjustment. Comes with an accessory rail for bipods or a laser that bolts on, but with only one center bolt, it will TWIST unless you put something to stop the slip under it when mounting.

Kral PLEASE get rid of the leak inducing fill probe set up and jump on-board with the FOSTER quick disconnect! PROBLEM: The check valve in the air tube has a hole cut out that has no finish sanding, so when you insert the fill probe, the first ORING gets cut EVERY TIME. Mine leaked at every fill until I gently used (by hand, no machining!) a dremel polishing bit and took off the sharp edge. Also had to use a liberal amount of plumbers tape to get the fill probe and foster fitting adapter to seal correctly. The nylon insert did nothing to seal the air in, the plumbers tape did it all. The instruction manual is for the non-bull pup version so taking out some of the first stage trigger pull was not as listed. It required tightening the linkage nut a turn and a half to remove the uptake slop. The sear adjustment was as listed in the manual.

Gets 36 shots on full power at 30 FPE, mine likes 18.1g JSB pellets. Running 850 FPS. Accuracy is 1/2 - 3/4 of an inch for 12 shots at 25 yards. This gun is LOUD, and the SILENT in the title is misleading. Unless you have a big piece of property, this rifle will disturb neighbors. The rail if too low and even with high rings, you will have a hard time getting your eye relief comfortable. You need HIGH RINGS and a picatinny riser. High rings alone did not do the job for me. The combo of the riser and the high rings make cheek mounting and eye relief comfortable and repeatable.

It's held up well for 2 years: Accurate with a wide variety of pellets/slugs and weights(see examples below). Valving seems very consistent out of the box following a predictable curve. the trigger can be set up pretty nice for a bullpup. Stock is comfortable and well balanced. These are all full power 10 shot groups over a chrono @ 1/2" or less at 25 yards: HN slug, 21gr, avg 789.7fps, spread 16fps, 29fpe. JSB Hades, 15.89gr, 897.67fps avg, spread 17fps, 28.4fpe. HN Crow Magnum 18.21gr, 826.4fps avg, spread 5fps, 27.6fpe.

It's a little heavy. I'd like it 2 lbs lighter. It's loud, the factory should put the shroud to use for more than decoration. The factory burst disc on my rifle failed 2x well below 2900psi. After the second failure I made my own disc. No problems since.

Out of the box this is LOUD. There a several easy modifications to fix. Originally, I reversed the shroud, added a barrel shroud spacer (air stripper) with 1/2-20 UNF female threads and 4 new style factory Marauder Baffles and spring (all from Hill airguns). topping it all with a Donny FL Tanto and threaded adapter. The pellet slicing the air and target impact is the loudest thing any bystander hears. For the shooter, the hammer noise seems loud For those more budget and weight conscious, I recently purchased and tested a thread on device from Buck Rail. Their Benjamin Akela Suppressor is a direct to the end of the shroud and very effective.