Call 888-262-4867 toll-free and we'll answer your questions. Hassle-free online buying. Order by noon Eastern & we ship the same day (weekends & holidays excluded). Some orders excluded.
So, are you looking for a fresh take on airguns?
Some new information, perhaps?
Check out our daily report!
Monday thru Friday find new topics about air guns, BB guns and airsoft guns. Ask your questions by clicking on the comments link at the bottom of each post.
$25 eBillme Rebate! Receive $25 by mail on orders of $100 and over when you checkout with eBillme. Valid for first use of eBillme only. Offer valid from October 9, 2009, to January 5, 2010.
Download the rebate form here.
Same day shipping exempt
This item doesn't qualify for Same Day Shipping Exclusions include but are not limited to international shipments, haz-mat products, special order items, orders with out-of-stock items, orders needing customer verification for processing, orders for technical inspection or product installation.
By Fernando from USA on 2009-08-21 11:40:15 - See all my reviewsAdd comment to this review
Things I liked:Well constructed and are the best option to add a scope for pistols like the Benjamin HB17. Things I would have changed:I will change the design a little bit to make it fit more tight on the barrel.. What others should know:The quality is really good and the finish match perfect on my HB17, the only bad
... Read MoreThings I liked:Well constructed and are the best option to add a scope for pistols like the Benjamin HB17. Things I would have changed:I will change the design a little bit to make it fit more tight on the barrel.. What others should know:The quality is really good and the finish match perfect on my HB17, the only bad thing its they are a little to big for the barrel of the Benjamin so the scope keep moving arround, I was working on a mod for my pistol so I wasn't worried and use some clear epoxic to fix the problem.
By Customer from USA on 2009-08-18 07:20:44 - See all my reviewsAdd comment to this review
Things I liked:They keep the box company that I have put them in,,, Things I would have changed:These mounts do not fit the barrel of my Benjamin with good security. They do NOT provide the amount of clamping force to provide stability. I also do not like the fact that a pistol scope must be used...I WOULD NOT suggest that a purchase
... Read MoreThings I liked:They keep the box company that I have put them in,,, Things I would have changed:These mounts do not fit the barrel of my Benjamin with good security. They do NOT provide the amount of clamping force to provide stability. I also do not like the fact that a pistol scope must be used...I WOULD NOT suggest that a purchase of these mounts be made. What others should know:
By Carson from USA on 2009-07-10 16:22:10 - See all my reviewsAdd comment to this review
Things I liked:Fair price, good construction, and a nice overall appearance. If you want to upgrade your Benjamin's factory sights these are a must. Whether you want to use a laser, dot-sight, scope,etc.. These mounts are what you need. Things I would have changed:On my HB17 they actually fit a little too loose. Some sort of spacing
... Read MoreThings I liked:Fair price, good construction, and a nice overall appearance. If you want to upgrade your Benjamin's factory sights these are a must. Whether you want to use a laser, dot-sight, scope,etc.. These mounts are what you need. Things I would have changed:On my HB17 they actually fit a little too loose. Some sort of spacing is needed. I'm not one for putting tape on any part of my air guns. So I tried some thin strips of foam material I had laying around the house. Seems to be holding. You can't exactly have your intermounts moving around freely, that would defeat the purpose. What others should know:Personally I don't mind the extra tinkering with products like these. Aftermarket parts for air guns don't always work the way you want. Modifying them so they do is a pleasure to someone like me.
By Foster from USA on 2009-02-22 06:34:09 - See all my reviewsAdd comment to this review
Things I liked:it's a good first try at a mount for guns that obviously were'nt meant for scope mounts Things I would have changed:there should be to tightening screws instead of one on each mount and they should be a good beefy larger diameter allen head bolt .
Also the inside of the clamp that actualy comes into contact with the
... Read MoreThings I liked:it's a good first try at a mount for guns that obviously were'nt meant for scope mounts Things I would have changed:there should be to tightening screws instead of one on each mount and they should be a good beefy larger diameter allen head bolt .
Also the inside of the clamp that actualy comes into contact with the barrel of the gun needs to have some kind of texturing to it so it bites in a bit and prevents slipage. What others should know:if your gonna try these mounts , and i have ... both on my Benjamin HB17 and my Crosman 1377 .....choose as light a sight as possible to mount on them , tighten the hell out of the mounts , pump softly , and hope for the best .
By Tadish from USA on 2008-07-30 16:34:23 - See all my reviewsAdd comment to this review
Things I liked:Simple, easy to use, stays put when installed. Things I would have changed:Nothing. What others should know:This is pretty much required equipment for anyone wanting to buy a Benjamin Sheridan HB22.
By gendoc from USA on 2008-07-20 14:07:29 - See all my reviewsAdd comment to this review
Things I liked:very solid, easy to install, did not have to bore sight
just a few clicks, and its dead on!!!!!!!!
excellent product and service, fast shipping
will do business with pyramyd again Things I would have changed: What others should know:
By Alaskan Bob from USA on 2008-06-30 18:52:28 - See all my reviewsAdd comment to this review
Things I liked:It allows me to mount the scope set up beyond the pellet loading chamber instead of directly over it like the Air Venturi Mount. Things I would have changed:A better mount to barrel tightening system.
Offer it in a dovetail / weaver mount. What others should know:I wanted to be able to use some of the
... Read MoreThings I liked:It allows me to mount the scope set up beyond the pellet loading chamber instead of directly over it like the Air Venturi Mount. Things I would have changed:A better mount to barrel tightening system.
Offer it in a dovetail / weaver mount. What others should know:I wanted to be able to use some of the rifle scopes and reddots I have on hand, so I bought the: UTG DOVETAIL 3/8"-WEAVER PICATINNY 7/8"RAIL ADAPTER for 15.00 delivered.
I too was was unable to get this mount to tighten down enough to hold a full size scope and in the end ended up grinding the little metal tabs off on the inside top of the mount.
Be warned - do this on only one side of the mount and not on both side of the same mount, otherwise you will not be able to tighten it on your gun. I know this because I did it on both sides of the same mount ,and found out that it took away all clamping pressures of the mount to the barrel. Because I only did this to one mount and not both, I buddied up one ground side with one untouched side, which ended up putting the ground off tabs, on opposites sides of the barrel. I don't know if this is structurally better, but I think it would be because you are providing clamping pressure on two different sides of the barrel instead of the same side of the barrel.
By Mike Francioli from USA on 2008-05-26 08:20:48 - See all my reviewsAdd comment to this review
Things I liked:The ability of putting a scope on my 397 rifle Things I would have changed: What others should know:Some people complain that the screws have a tendecy of breaking so remember when the mount is tight that there is no slippage dont try forcing it any further
By steve from USA on 2008-04-02 16:32:49 - See all my reviewsAdd comment to this review
Things I liked:I can put a scope on my Benjamin 397 Things I would have changed:I could not get the mount tight enough, it could have fit better.
I opened the mount all the way, while it was in position on the barrel,
and back filled it with epoxy, snuged up the screws, align the two mounts
by temporary mounting scope mount, remove
... Read MoreThings I liked:I can put a scope on my Benjamin 397 Things I would have changed:I could not get the mount tight enough, it could have fit better.
I opened the mount all the way, while it was in position on the barrel,
and back filled it with epoxy, snuged up the screws, align the two mounts
by temporary mounting scope mount, remove scope mount and let epoxy set over night.....this thing is rock solid now What others should know:I dont know how long this mount will stay rock solid ...
but i shure like havin a scope on this little shooter it groups great,
which makes it fun to shoot.oh i mounted a 4x32 bushnell sportview
with a leapers offset mount
By Mitchell from USA on 2008-03-04 22:09:49 - See all my reviewsAdd comment to this review
Things I liked:Easy installlation, Things I would have changed:nothing What others should know:I was very happy with the product i recieved and also with the fast shipping of product. Good job Pyramid.
By George from USA on 2008-01-17 21:31:01 - See all my reviewsAdd comment to this review
Things I liked:The one pair that came worked, the other pair does not clamp down hard enough and slides up and down the tube on my Benjamin Sheriden 397PA. I cannot mount my nice scope now and make the customer (me) sad. Things I would have changed:I would have liked if both pairs in the kit were tight on the rifle. I wish that I
... Read MoreThings I liked:The one pair that came worked, the other pair does not clamp down hard enough and slides up and down the tube on my Benjamin Sheriden 397PA. I cannot mount my nice scope now and make the customer (me) sad. Things I would have changed:I would have liked if both pairs in the kit were tight on the rifle. I wish that I can return them, but it has been over 30 days now since I bought them. That sucks, These are made out of steel, then should just WORK! What others should know:I would avoid these and look for an alternate kit if available
By Tim from USA on 2007-10-25 07:17:25 - See all my reviewsAdd comment to this review
Things I liked: Ease of installation, price and good quality. Things I would have changed:Nothing. What others should know:Installed the Intermount set on a Benjamin Sheridan EB22 using a 2x20 Simmons ProHunter handgun scope. Seems to be a very solid fit, no wobble. Not sure if this set-up would be advisable on Benjamin
... Read MoreThings I liked: Ease of installation, price and good quality. Things I would have changed:Nothing. What others should know:Installed the Intermount set on a Benjamin Sheridan EB22 using a 2x20 Simmons ProHunter handgun scope. Seems to be a very solid fit, no wobble. Not sure if this set-up would be advisable on Benjamin rifle with anything other than a compact scope or red dot.
By Guncross from USA on 2007-10-21 21:57:58 - See all my reviewsAdd comment to this review
Things I liked:I like having the scope ability on my Benjamin Sheridan 392 and my Benjamin Franklen. The aluminum mounts are make of a high strength aluminum alloy, so the threads wont strip before the screw just snaps. Things I would have changed:Tighter fit around th barrel! If you dont tighten it to the point where the screws are
... Read MoreThings I liked:I like having the scope ability on my Benjamin Sheridan 392 and my Benjamin Franklen. The aluminum mounts are make of a high strength aluminum alloy, so the threads wont strip before the screw just snaps. Things I would have changed:Tighter fit around th barrel! If you dont tighten it to the point where the screws are about to break the scope will wobble.... You can guess what happend. Yea the screws broke in half. Still searching for replacement screws. What others should know:Look for steel or titanium screws now, you will be needing them ;D lol. But dont let that stop you from purchasing this. It is great having a scope for a benjamin!
By doc from USA on 2007-08-31 15:38:52 - See all my reviewsAdd comment to this review
Things I liked:nothing! Things I would have changed:This mounting system will not work. The screws are way too soft. The pinch type of mounting simply cannot work,at least on the blue streak rifle. I called Pyramyd air and they even said that "oh it can be done". I'm wondering for how long. Pyramyd air is a class act but these mounts
... Read MoreThings I liked:nothing! Things I would have changed:This mounting system will not work. The screws are way too soft. The pinch type of mounting simply cannot work,at least on the blue streak rifle. I called Pyramyd air and they even said that "oh it can be done". I'm wondering for how long. Pyramyd air is a class act but these mounts are junk. What others should know:
By johnnypop from USA on 2007-08-24 08:46:52 - See all my reviewsAdd comment to this review
Things I liked:the only intermount I found that worked w/397. Had them instaled in mins... Things I would have changed:shipping was alot for small item. What others should know:make sure you have all hardware befor eyou mount your scope
