Lifetime limited warranty
List Price $129.95 Save $34.98 (26%)
Want it delivered 07-07-2015?
Order it in the next 9 hr and 5 min and choose Next Day Air Morning at checkout. Details
Average Customer Review4.5 (52 reviews)
Create an online reviewand share your thoughts with other customers
Things I liked:Good optics, good quality build. The windage and elevation locking rings are great and work as advertised. The adjustable objective works very well and gets me on target from as little as 10 meters. The illuminated reticle works great as well. Overall the scope is a great deal for the price. Overall the scope and accessories that come with it are great. I highly recommend it.
Things I would have changed:I think it would be best to offer the scope with the option to purchase with Weaver rings or Dovetail rings. Also this scope is really short and can be a problem when trying to mount it on a rifle with limited length rail, be it dovetail or Weaver. Maybe making it about 1 inch longer would remedy this. See below for my other solution to this.
What others should know:I bought this scope for my Daisey Avanti 853C pneumatic air rifle to shoot the NRA 10 meter range at our club. I found that the short stature of the scope created a problem in mounting it to that rifle due to the short receiver and being a dovetail rail. I purchased a Weaver to Dovetail one piece offset adapter rail which lifted the scope considerably higher so I had to shim the back ring of the scope with 4 layers of post-it-note paper to get it on target; otherwise I would run out of UP adjustment and still be 18 inches below the bullseye. This adapter also remedied another problem which was not having enough dovetail rail on the 853C to bring the scope back enough for proper eye relief. After all was mounted and adjusted I found this scope to be very accurate and great to shoot with. I highly recommend it to everyone.
Things I liked:I appreciate the packaging and everything in the box checked out just fine. The scope is very nice and solid and compact like I wanted and needed for close up yardage shots that my other scopes couldn't provide. The turret knobs provide very solid clicks for elevation and windage. The zero locking rings do their job well though I can see those with bigger hands(fingers) might have a bit of trouble with them. I love the mill dot Reticle and the illumination of both Red & Green which work very nice and brightness can easily be adjusted with the knob. You simply choose which you prefer in which ever light you are in. Oh, and I love the flip-up lens caps!
Things I would have changed:Nothing at this time.
What others should know:Think and decide carefully if you want this scope for an Air Arms S410 set up like mine which will not allow you to achieve a full field of view(eye relief). Because you have to make sure that the front end of the scope is over and in front of the breach. I don't have enough rail behind my breach which takes a rotor mag to place the scope further back behind it for the correct eye relief to be had. I wish there was an extension type rail made that I can attach to my back rail just for this type of problem. Higher mounting rings are out of the question for that would put the max strain on elevation and windage just to zero in. So for now I just compensate with a slight awkward position once in a great while.
Things I liked:Compact size, exposed turrets that reset to 0,comes with sunshade, mil-dots for holdover/windage, tough little scope, and holds o.
Things I would have changed:At 9 power the optics are a little fuzzy around the edges, no big deal, I'm seeing the crosshairs on a ground squirrels ear at 25 yards. The eye relief is too short, but with the wright scope mount is adjustable. I did not use the mounts that came with it for that reason. Better scope caps, that snap on, rather than the flip up. Flip up caps on an AO scope are awkwardly offset when adjusting magnification.
What others should know:This scope has a very short mount distance of 3", I used the BKL 1 piece 3" mount(also sold here at PA) to correct the eye relief more to the rear of the dove tail mount. This is the perfect mount for this scope, 1pc, very solid, and well built. By the way, I bought this setup in 2012, for a highly customized Crosman 1377 pumper with 14" barrel. 10 pumps x 8000+ rounds is a LOT of vibrations, and this scope, with mount, has never lost 0 at 25yds. Many a ground squirrels will attest to this scopes toughness, and dependable accuracy. Use blue locktite on all screws after final adjustment. I liked this setup so much I just bought another for my new 10/22 Takedown Tactical. I read another review that stated this scope does not need to be removed from the receiver after takedown to fit in the backpack. I purchased a picattiny combo dovetail mount to use the BKL scope mount. I will give an update after a range test on the new 10/22. Hopefully UTG has made improvements in 3 years.
does not include shipping and tax