Sportsmatch 1" Rings, Medium, 9.5-11.5mm Dovetail

great quality and fair price

nothing

Large hex screws, with 4 mm and 3 mm hex keys provided for base and rings respectively. Roll pin for the rear stop fits snugly with light taps. Medium height is good for the 4 x 32mm 'scope on the 11mm dovetail. 9.5 mm = 3/8 inch. (Flip the base piece over for the coversion.)

Not a thing.

Looks stout enough for a .22 springer (and beyond)...

While I just installed these a week or two ago, the quality seems to be very good and they have performed great so far. Price good. I like the pin that keeps them from sliding on the rails. Without this feature, I would not have purchased them because I was installing a scope on a fairly powerful springer..

Nothing that I can think of.

I like everything. especially the the quality made in Germany.

Nothing

These scope rings fit rock solid on any air gun. I use them on magnum Springers and pcp's with no issues

Being able to fit from 9.5-11.5 mm dovetail is good. Having both sets of allen wrenches was helpful. They arent overly heavy but seem very sturdy,

I am not very optimistic about only using a pin and not a set screw for the stop pin. Time will tell. Not having grip tape on the top rings makes me rethink my purchase. I have 2 Crosman Nitro rifles, 1 in .177 and .22. The whole idea of these rings was to hold the scope in place.

Use a zigzag pattern as you tighten the caps. Go slow, and try to make sure the gap you have between the base and the top ring cap are the same on both sides. Nothing much worse than to get the scope all level and snug only to realize you squeezed the tube.

Good quality

nothing

A little blue Loctite on base is essential. Don't forget to install the lock pin and make sure it fits in the back of the hole in the barrel

super buy, super easy install!!!

Nothing, ok, maybe shipping a tiny but faster.

Pyramid is the place to go for all your air gun needs. SUPERIOR customer service each & every time! We NEVER shop anywhere else!

Very strong rings and good material. These are the kind of rings I like on my big game rifles. When you pick them up you know they are good and strong.

I use these rings with the hawke 6x24x44 scope on top of a .22 marauder. There is about 1/4 to 5/16 from barrel to scope, a little bit less with the scope caps on.

Strong and solid, good price.

Nothing

The quality is second to none. When these clamp down on a scope, they stay down! Nothing moves. Ever. I like the look and feel, these are not your typical $15-20 mount, those get left in the dust when compared to these mounts. These are made of duraluminum, a hardened alloy is mixed with aluminum to produce a rock-solid mounting system that will last a lifetime.

Not a single thing!

These mounts are made in the UK by SportsMatch.
Be careful when tightening these down on a scope tube. THEY WILL CRUSH A SCOPE LIKE TIN CAN, you should heed the manufacturers torque warnings for installing scopes. They require very little force, about 2.5-3 lbs max according to the SportsMatch website.
These are my 4th set of SportsMatch mounts, my others are still going strong for over 15 years and the scopes haven't moved at all.