Date: 21/10/2019 2:34
0

AirForce 1/4" male. AFU1009. Customer Reviews - page 1

Average Customer Review

4.0 (4 reviews)
4 star3 star1 star
Special OrderLimited Quantities.
Check product details for delivery time.

Create an online review   and share your thoughts with other customers

The most helpful favorable review

2 of 2 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By Horace from USA on 2009-10-03 10:04:11

Things I liked: Very solid construction! Not a "pressed fitting". One piece steel.

Things I would have changed: Nothing.

What others should know: Be aware of the thread differences in some airgun accesories. The BSPP, (British Standard Pipe, Parallel) connection is similar to the National Pipe Straight Mechanical (NPSM), except the the thread pitches are different in most sizes. These are NOT metric, but measured in inches. Since some of these fittings for PCP airguns can be made in Asia, Europe, England, and America, be careful when ordering an assortment of parts to create your own fill rig. You may end up with an assortment of Metric, Inch, British, and American thread pitches, none of which will interconnect. Verify thread ID, size, and system of measurement, before you "mix and match".

The most helpful critical review

0 of 0 people found the following review helpful:

Overall rating:2.0

Value for money:4.0

By Bandon from USA on 2019-03-05 21:31:45

Things I liked: Well it was good while they stayed with the old Airforce guns but when they changed it over to quick disconnect now I am now I can't air up my old styled airforce condor. Because the the 1/4" BSPP adaptor seal they don't sell them anymore so that is why they are trying to discontinue this whole thing. it's best to just buy the same one same type but instead of having the 1/4" threaded get the one that has the nipple on it for the quick disconnect this will solve your leaking seal problems... and buy about 20 of the 1/8" seals i just bought 10 of them they are too high priced but you can't even buy a cheese burger for less than $5 georges any longer.

Things I would have changed: nothing good product just provide the seal for them... the 1/4" BSPP seals.

What others should know: Buy the one that has the nipple fitting on it... & go to quick disconnect; it's much easier. thanks to PA that they are trying to take these off the market.

Sort by:
  • 2.0 2.0

    4.0 4.0

    By Bandon from USA on 2019-03-05
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Well it was good while they stayed with the old Airforce guns but when they changed it over to quick disconnect now I am now I can't air up my old styled airforce condor. Because the the 1/4" BSPP adaptor seal they don't sell them anymore so that is why they are trying to discontinue this whole thing. it's best to just buy the same one same type but instead of having the 1/4" threaded get the one that has the nipple on it for the quick disconnect this will solve your leaking seal problems... and buy about 20 of the 1/8" seals i just bought 10 of them they are too high priced but you can't even buy a cheese burger for less than $5 georges any longer.

    Things I would have changed: nothing good product just provide the seal for them... the 1/4" BSPP seals.

    What others should know: Buy the one that has the nipple fitting on it... & go to quick disconnect; it's much easier. thanks to PA that they are trying to take these off the market.

     
  • 5.0 5.0

    5.0 5.0

    By Barry from USA on 2011-01-30
    See all my reviews
    Was this review helpful?
    1.01 rating

    Things I liked: quality, a must have

    Things I would have changed: nada

    What others should know: get the right adapter for your scuba set up and good to go

     
  • 5.0 5.0

    5.0 5.0

    By G.Austin from USA on 2010-01-31
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Solid construction. AirForce helpline was great by helping my dive shop.

    Things I would have changed: Nadda.

    What others should know: My dive shop found the correct fitting female t-junction for my DIN tank to work with this adapter with ease.

     
  • 5.0 5.0

    5.0 5.0

    By Horace from USA on 2009-10-03
    See all my reviews
    Was this review helpful?
    5.02 ratings

    Things I liked: Very solid construction! Not a "pressed fitting". One piece steel.

    Things I would have changed: Nothing.

    What others should know: Be aware of the thread differences in some airgun accesories. The BSPP, (British Standard Pipe, Parallel) connection is similar to the National Pipe Straight Mechanical (NPSM), except the the thread pitches are different in most sizes. These are NOT metric, but measured in inches. Since some of these fittings for PCP airguns can be made in Asia, Europe, England, and America, be careful when ordering an assortment of parts to create your own fill rig. You may end up with an assortment of Metric, Inch, British, and American thread pitches, none of which will interconnect. Verify thread ID, size, and system of measurement, before you "mix and match".

     
Navigation