Sig Sauer P365 ASP Air Reviews

These are great...except for the design/material of the screw that presses the CO2 cartridge in, which is the reason that I needed to purchase replacements. The hex key socket is too shallow due to the concave part that mates with the cartridge and the screw is made of material that is too soft.

Happy with literally everything about the P365 except "the screw in the Co2 is terrible, and so easy to strip the threads if you don't fit the screw in properly." quoted from another review, and i completely agree. already stripped 2 causing me to purchase 2 additional mags. I would recommend to sell replacement screws for the mag for co2 instead I can't now get the screw out help please make some more screws for the bottom of the magazine I need two SCREWS please SELL ME SOME PLEASE! Joe

The size is really good. But I’m having problem with loading. Most of the times it jams and stops feeding. But hen i dont know if the magazine has the problem or it maybe the airgun itself. Quality wise, its has a solid construction.

Got what I wanted with no problems. The company representative was very knowledgeable

The air for Co2 leaks and Allen screw bottom strips out easily didn’t last a day the pistol itself had multiple jams I cleaned it many times , I worked on it more that I got to use it , does sig make a better quality co2 bb or pellet pistol ?size and design was very realistic but it stops there

The mag got stripped on its second use like now I gotta buy a whole new mag

I don't like this design because the co2 leaking

I would try to figure out how to fix the co2 leaking.

The should know than the pistol is great but the magazines are defectives. Magazines have a co2 leaking.

My brother bought a p365 and a spare mag a few months back, but stopped using it because when you pull the trigger, the gun would release all of the Co2 in the magazine. I compared the photo to mine and my mags have a slight tear in the rubber seal for the Co2 on the back of the mag. Both of the mags have the same size tear in the same spot. Very disappointing because the pistol is really nice, and appears to be made of quality stuff.

It is close enough to a real sig sauer 365 that it fits in the same holster, It makes for realistic reasonable training out to about 5 yards. This is my second magazine so I have a spare. So far no gas leakage.

nothing

Haven't used it yet. Certain it will be what we want. Quality, Did not look cheaply made, decent weight for it is. Worked for the P365BB, tested out fine without the pressure vessel for fit. Test operation looks like it will succeed based on inspection of hardware and seals. Did not come with Bbs.....

Brand New

Just make sure that the defects are all gone...

These Are prone to Not work Over time..let's hope the Defects are all Fixed

Gun still jams. Set screw on the bottom of magazine still very weak.

Outstanding product! All around perfection, product speaks for itself

The hex nut that depresses the CO2 cartridge strips out easily.

Like the higher capacity! Very pricey part though…

Replaced the old magazine with this one because the locking nut for the CO2 stripped. Now this magazine won't fire without manually cocking after half the BBs in the mag have been expended. Too expensive not to function fully.

I recently bought the p365 BB gun co2 and it is always jamming up after the first shot. I’m not sure if there’s something I’m doing wrong but I’ve seen other reviews saying the same thing :(

have three of these one works ok not 100% the other two miss load and sometimes fire two at a time also hard to load !

I’ve had this thing 20 minutes and the mag is striped out because the tools that came with it don’t fit correctly. Seriously wasted money on this junk.

Works perfectly. If it starts jamming, it means co2 is running out.