Date: 12/8/2022 10:53
0

Air Venturi Feinwerkbau Piston Seal Reviews

Air Venturi Feinwerkbau Piston Seal, Fits FWB 124 Air Rifle

Average Customer Review

5.0 (12 reviews)
4 star
2 star
1 star
Pre Order

Out of Stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

1 of 1 people found the following review helpful:

5.0 5.0

5.0 5.0

By Paul from Canada on 2019-09-30 14:37:42

Things I liked:

Fast delivery

Things I would have changed:

Very tight fit getting in cylinder.

The most helpful critical review

0 of 0 people found the following review helpful:

3.0 3.0

3.0 3.0

By Robert from USA on 2021-02-26 21:56:30

Things I liked:

Looked good

What others should know:

Would not even push the pellet out of the barrel. Dont know if its normal, but had to use silicone lube to get it to shoot. Hopefully this works for the long term. Dont want to take the gun apart again .

Sort by:
Filer by:
  • 3.0 3.0

    3.0 3.0

    Verified Purchase

    Things I liked:

    Looked good

    What others should know:

    Would not even push the pellet out of the barrel. Dont know if its normal, but had to use silicone lube to get it to shoot. Hopefully this works for the long term. Dont want to take the gun apart again .

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Fast delivery

    Things I would have changed:

    Very tight fit getting in cylinder.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Easy to install (once I got the airgun apart, LOL). My FWB 124 shoots like it was new!

    Things I would have changed:

    nothing

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Perfect fit

    Things I would have changed:

    Nothing

    What others should know:

    No

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    The FWB 124 seal fit without a problem...no trimming or sanding required. My chronograph tells me that the rifle is now performing above factory spec. Who could ask for more?

    Things I would have changed:

    Not a thing.

    What others should know:

    I also bought a replacement FWB 124 spring from Pyramyd that I installed at the same time. It's full-length like the factory original, not a shimmed down shorter version. Together with the seal, the rifle is performing above factory specs!

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Quickly shipped and quality item.

    Things I would have changed:

    Nothing

    What others should know:

    I did not have to re-size this seal to fit. Installed it with some silicon lube and it worked fine first shot.

  • 5.0 5.0

    3.0 3.0

    Things I liked:

    This seal appears to be the perfect fit and so far has worked very good, I would recommend any one replacing there seal to get this one and some grease.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    popped right in and fit super

    Things I would have changed:

    nothing

    What others should know:

    out of the air gun press 1/2 in 25 yard gropes first 5 shots

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Installation was easy if you know what you're doing, and functionality is excellent.

    Things I would have changed:

    nothing

    What others should know:

    Be EXTREMELY CAREFUL with the spring in this rifle, and make certain your compressor can handle this spring...

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    The seal fit perfectly, The 124 is shooting better than ever, the technical help from Pyramyd concerning proper lube was correct. I am more than satisfied to have saved this fine old gun.

    Things I would have changed:

    Because of conflicting advise on line, albeit well intended, a page or two of instruction would have been appreciated.

    What others should know:

    For the 124, you will have to make the spring control tool. Log the steps you take, so you can accurately reassemble. I used a padded bar clamp to seat the seal, that worked for me. Good Luck

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Perfect fit! Rather easy repair, after I built a spring compressor. Great way to bring a terrific old gun back to life!

    Things I would have changed:

    Include a very small tube of moly grease?

    What others should know:

    Maybe take a few photos before & during teardown, to help during re-assembly.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    perfect fit, works great

    Things I would have changed:

    nothing

    What others should know:

    cheap way to save a good airgun

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.