Air Venturi G6 Hand Pump Reviews

Good solid pump fills my pcp's faster then the Benjamin I have. the length of hose over the short one on the Benjamin is nice making fill up easier for me.

SS Foster female quick connect which only lasted three fill ups before the ball bearings that fell out which PA replaced within a few days of receiving my request about a replacement good work PA

Can't wax too poetic about an air pump, but I will say this: the G6 is simple to put together, does what it's supposed to do and does it well. I'm using it for a 300 bar fill-up on at Ataman AP16 with nary a problem.

The instructions are simple. Perhaps too simple. The G6 comes with a bag filled with components such as o-rings. As I've since learned online, they're replacement parts. Wasn't sure if there were needed for the initial set up or not. But there's nothing saying where the replacement parts should go even if there is a problem.

When you think everything is tightened down...tighten it some more. (With the exception of the pressure gauge.) Had some initial air leaks that even a quarter turn resolved.

Easy to use. Solid construction. Works 100 times better than Benjamin pump

Nothing

Works fast. Great for a marauder and if you pace yourself an air force condor

Easy to assemble, easy to use, wasn't as difficult to pump as people made it out to be, fills up my AT44 cylinders right quick! Also gives me a nice little workout lol

I'd make the base a bit heavier and sturdier, and the air hose is a bit short. I'd lengthen it and add a catch so it doesn't drag on the ground.

Hatsan is a great brand. Being new to the sport of Air Guns, I'm extremely pleased with my first purchase of a Hastan AT44 Tactical QE. Easy to use, and man does it pack a punch. The next air gun I'm going to purchase will be a Hastan AT-P2 QE Tactical Pellet Pistol, and after that (if I have the cash) a Hatsan Barrage or a Hatsan BullMaster. Love it!

Solid pump. O-ring rebuild kits included. No trying to match up O-rings at the local hardware if one fails on a weekend.

Add a 90 elbow to the gauge so you can see it while pumping. Maybe add another foot length to the hose.

Good solid pump. Filling my .25 Marauder from 2000 back up to 3000 only takes about 75 pumps. It is a bite filling up from empty! Haven't had to rebuild the pump yet, but they do send a couple rebuild kits with the pump.

Longer hose and a better SS Foster female quick connect. The bearings fell out after a dozen fill ups. I tend to believe the Foster issue was do to the hose being short and pulling on an angle when filling the rifle. ADD a 90 elbow on the gauge so you can see it while standing and pumping. Stopping to bend over or to raise the pump up to see the gauge sucks. More stress on the hose and connectors too.

PA was top notch in sending out a new Foster end. But call their number instead of emailing them. They are too busy to play email tag!

nothing

if it would function with out problems and not have to pump a hour for 5 shout in five shots in five minutes

There has to be a better way than paying up to 4 thousand for air compressor

This is a very straight forward air pump. Easy to assemble and use. Contains parts to rebuild and repair when needed.

The instruction booklet could be better.

Buy some teflon tape for some of the connections. While it is easy to use, you will get a work out! I see an air tank and/or a compressor in my future.

4500 psi, comes with all necesssry hardware, extra seals, price is on the lower end.

Nothing

Only comes with female quick disconnect, make dure that is what you need

4500#psi folding feet,SMOOTH!!!! Dead head plug and reseal kit.

Shorter hose, better instructions (for the less mechanically inclined)

Had the AF pump for three years of minimal use, then it failed. Sent it in for rebuild, added moisture trap.....three years later.....FAILED AGAIN! Bought this AV pump recently, and its smoother than the AF ever was. No problems so far. Nice pump.

Everything so far.

Shorter hose....so I did.

Just got it....super smooth. Had the AF pump.... After three years of very little use, it quit. Sent it in for rebuild, added moisture trap...three years later....same....now its spare parts..... I can already tell this pump is way better. Love the folding legs, allows me to store it in a small rifle case.did I menionbits smooth??? Tested to 1500#.....then to 4000#. So far so good!!!

Well built.

Fitting to attach to Benjamin Maximus is kinda stiff to get on. Wish it had an easier way to connect.

This does take some effort to get to 2000 psi but it can be done.

None

Illustrations and description of assembly/disassembly in manual poor. Even downloaded the online manual to enlarge illustrations of no help. Although the concept of a folding base is the right idea, the pump would not stand vertical on its own. The base rubber pad came loose easily.

The wrong test plug was included. It would not fully insert and seal to test pump. The pump would only pump my Marauder pistol to 2000 psig as received regardless of how hard I tried. The manual trouble shooting guide did not indicate what the problem might be. The pump was returned to Pyramydair for a full refund.

Good looking pump

All the steps you have to take to put it together.

Pressure Gauge started leaking oily liquid on to my carpet on first day. Made in China!! Airforce Pumps are Made in USA, Ft Worth Texas.

works good

get some one else to go shoot my rifle with me and all i would ask is eat your Wheaties before we go

the smaller the air reservoir with a hand pump the better off you are to get back to shooting faster

Pump seems well built, easy to assemble despite the fact that there are no instructions, other than where to put o-rings in a re-build. Lightweight and like the folding feet, makes it easy to store

Love the pump so far, but the hand grips could use a little more padding, after about 100 strokes it gets a little rough on the hands

take a rest after each 100 pumps so the pump doesn't get too hot... I pumped up a 13ci tank to 3000 psi with about 250 strokes... it gets kinda tough after you hit 2000 psi, but not that bad... I also pumped up a 48ci tank to 3000 psi, that took about 45 minutes resting every 50 to 100 strokes., The larger tank was a little more difficult but not too bad, it helps if you weight over 200 lbs!

Works as it should, filled my Hatsan BT65 SB Elite with no problem. Comes with necessary replacement parts.

Add better assembly instructions and proper instructions on replacing O-rings.

Be prepared to get a work filling air reservoirs

Nice looking design

Brand new, out of the box. the hose leaked from just behind the connector. Failed the testing process outlined in the manual.

it is easy to use and as tough as nails. i pump up to 3300psi from 2000psi and it only takes a few minutes of pumping. it comes with the needed supplies to rebuild if necessary. i have been pumping non-stop and this thing has never failed to impress. it has the foster quick disconnect fitting. buy it, it well worth the money.

nothing, its wonderful the way it is.

i bought this from a company who i believe bought it from pyramydair. great service as always.

it works. its better than looking at your gun and not being able to shoot it .but not by much(lol)

made in china not to thrilled about that. takes for ever to fill your gun up. and no direction to put it together. just guest. but its working so far. no leeks.

I think im gonna start saving for an air tank and my own compressor. this thing sucks but its better than nothing