Create an online review and share your thoughts with other customers
5.0 5.0
5.0 5.0
By christopher from USA on 2015-10-14 22:30:14
This is a Perfect fit in my Synrod. It allows me to shoot predator poly mags more accurately then from the magazine
Things I would have changed:Nothing
What others should know:I read a lot of bad reviews. the manufacture must've picked up on these and corrected the problem, it fit perfect. The tray slides in from the left opposite of the magazine just in case you don't read the instructions before you try to install it
1.0 1.0
1.0 1.0
By BRUCE from USA on 2020-12-30 15:11:28
I liked the customer service when they sent me a replacement lickity split. Had to use a lot of force on bolt, it wasnt lining up to chamber a pellet. The replacement was only slightly better.
What others should know:I use JSB Diablos
Sort by: | Date
| Helpfulness
| Rating
|
---|
Filer by: |
---|
5.0 5.0
5.0 5.0
works as advertised. a very tight fit. at first, I thought it was the wrong size. It works great though.
Things I would have changed:nothing
What others should know:Pyramyd Air is the best place for airgunner supplies...period.
4.0 4.0
4.0 4.0
Nice for super precise shooting and or when using lubricated pellets.
Things I would have changed:Changes should be made so the unit fits without modifications.
What others should know:Many other reviewers observed the same problem of poor fit. The fit problem is a simple one to fix in just about a minute. Simply use a pointed x-acto knife and cut that step out, and the first half of the radius where it slips under the barrel breech. It's as if it is milled for a .22 maybe. Anyway, it takes only a minute or so to do this little mod.
1.0 1.0
1.0 1.0
good material
Things I would have changed:make it fit
What others should know:Did not fit my .25 marauder. Had to do some substantial dremeling to make it fit
1.0 1.0
1.0 1.0
This product was defective and would not fit into my air gun, the one I purchased for the 22 cal works as it should
1.0 1.0
2.0 2.0
Nothing! It does work. However, Pyramydair was great about refunding money.
Things I would have changed:I would change the little NUB that is suppose to hold the tray in place to a full have circle that clicks around the opening in the chamber like the one on eBay from a seller that 3D prints them for half the price!
What others should know:The product does NOT fit the .25 ca. Benjamin Marauder rifle. There is a plastic nub that is NOT big enough to fit the circular chamber and instead prevents the tray from being able to go in place. There is a guy on eBay that makes a cheaper priced 3D printed version that works great! Reason is that he makes his product with a bigger hook that goes around the opening in the chamber!
5.0 5.0
5.0 5.0
Functions as designed.
Things I would have changed:Lower price
1.0 1.0
1.0 1.0
nothing . This 25 caliber tray did not fit my marauder at all. It took me several hours of grinding with a dremel a little at a time then trying it ,until I got it to fit right.
Things I would have changed:Make it to fit right !!!!.
What others should know:Do not expect it to fit right out of the box
1.0 1.0
1.0 1.0
Nothing !
Things I would have changed:Make it so it fits !
What others should know:Cheap, overpriced junk. Does not fit my .25 Marauder.
5.0 5.0
5.0 5.0
Just got it couple weeks ago i like it a lot trying different pellets that won't work in the clip. Works very well
Things I would have changed:Nothing...or maybe making it bright color
What others should know:Easy enough to lose. Small and black color
3.0 3.0
2.0 2.0
Does not fit without modifying it.
Things I would have changed:Price and the fit.
1.0 1.0
1.0 1.0
Light weight
Things I would have changed:Got one and it didnt fit. P Air sent a new one. That doesnt fit either I will have remove material to get it to work. This is for a 25 cal mrod
What others should know:Read above
By Don from USA on 2018-06-25 |
1.0 1.0
1.0 1.0
Nothing to like
What others should know:Does not work, would not allow the bolt to cycle
By Tom from USA on 2019-06-28 |
5.0 5.0
5.0 5.0
one of the things I disliked about he Benjamin Marauder was how hard it was to load the gun without a mag. forgot the mag one day out to the range and it was frustrating. this single shot tray is the answer to that! it also allows me to shoot heavier rounds and cast slugs. I think this is must have for your bag.
3.0 3.0
3.0 3.0
Mine did not fit right out of the box. It is supposed to go in from the left side and the bolt must be pulled back all the way so it doesnt protrude. On mine, it would not slide all the way in but lacked about 1/64 of an inch to be fully installed. I pushed on it firmly so that I would see shiny spots where it was rubbing. It was hitting the edge of the J slot that fits around the breach. I tried removing the excess plastic with a single edge razor blade, but the plastic is tougher than I thought & removing so little required more delicacy than I could muster. Fortunately I bought a cheap $10 rotary tool from H. Freight at some point that just happened to have a pink stone included that was the correct size. The tray now fits but the bolt very slightly drags on the pellet slot as you push it forward. It works fine.
Things I would have changed:Having to modify this tray before it fits is not acceptable for some people.
What others should know:Maybe this item and the guns have enough difference in tolerances to give some of us fitting problems. We do want this to be a tight fit so that it's not falling out constantly. Seeing as how this is likely the only type available, be prepared to do a little careful fitting if you want one.
1.0 1.0
1.0 1.0
Nothing to like, it didn't fit.
Things I would have changed:test fitting on a fixture before shipping.
5.0 5.0
5.0 5.0
Great to use when bench shooting rifle for matches
Things I would have changed:maybe make out of steel for longer life
4.0 4.0
5.0 5.0
single loading is sometimes more accurate depending on the pellet you use
5.0 5.0
3.0 3.0
Nice single shot alternative to sometimes quirky rotating magazines.
Things I would have changed:Nothing really. Seems a bit overpriced for what it is.
What others should know:It fit perfectly in my Marauder with no modifications needed. As stated in instructions, it inserts from the left side, not the right like the magazines do.
5.0 5.0
5.0 5.0
This is a Perfect fit in my Synrod. It allows me to shoot predator poly mags more accurately then from the magazine
Things I would have changed:Nothing
What others should know:I read a lot of bad reviews. the manufacture must've picked up on these and corrected the problem, it fit perfect. The tray slides in from the left opposite of the magazine just in case you don't read the instructions before you try to install it
Get FREE shipping on qualifying orders!
Any order $150+ with a shipping address in the contiguous US
will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout.
Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
We have a team of expert technicians and a complete repair shop that are able to service a large variety of brands/models of airguns.
Additionally, we are a factory-authorized repair/warranty station for popular brands such as
Air Arms, Air Venturi, Crosman, Diana, Seneca, and Weihrauch airguns.
Our experts also offer exclusive 10-for-$10 Test and 20-for-$20 Service,
which evaluates your air gun prior to leaving our warehouse.
You'll be able to add these services as you place your order.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We've got you covered! Return any item in new, unopened condition along with its original packaging and any accessories that might have come with your product and receive a refund within 60 days of purchase.
Our customer service team can help determine the best course of action and provide you with some options in the event you're interested in a return.
Learn About Returns
Join the Pyramyd Air mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Airgun safety is no accident. You must be 18 years or older to buy any air gun or air rifle in our store.
Text JOIN to 91256 and get $10 Off Your Next $50+ Order.
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By BRUCE
1.0 1.0
1.0 1.0
I liked the customer service when they sent me a replacement lickity split. Had to use a lot of force on bolt, it wasnt lining up to chamber a pellet. The replacement was only slightly better.
What others should know:I use JSB Diablos