Date: 25/5/2022 22:34
0

Air Venturi Universal Muzzlebrake, .655"/.590" Reviews

Air Venturi Universal Muzzlebrake, .655"/.590" ID, .855" OD

Average Customer Review

4.0 (31 reviews)
4 star

Create an online review   and share your thoughts with other customers

The most helpful favorable review

2 of 2 people found the following review helpful:

5.0 5.0

4.0 4.0

By Anthony from USA on 2015-10-23 14:17:40

Things I liked:

Appearance, nice finish, fit beautifully using the insert.

Things I would have changed:

A few holes drilled in it would make it look really neat.

What others should know:

After removing the front sight on my Beeman the insert fit perfectly on the barrel. I slid it on and tightened the set screw so it contacted the insert and not the barrel. Results, no marks on the barrel, and it holds perfectly and is easy to adjust if you want to -- although I slid the brake all the way on. I'm going to order a second one.

The most helpful critical review

0 of 0 people found the following review helpful:

1.0 1.0

5.0 5.0

By cyberrifles on 2022-02-05 11:13:35

Things I liked:

Great price.

Things I would have changed:

More universal fit.

What others should know:

Will not work on Weihrauch HW90.

Sort by:
Filer by:
  • 12 Next
  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Me gusto el broducto buena calidad

  • 1.0 1.0

    5.0 5.0

    Things I liked:

    Great price.

    Things I would have changed:

    More universal fit.

    What others should know:

    Will not work on Weihrauch HW90.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Nice cocking extension, also better gripping rather than the smooth ones. Ih yeah, looks sharp too!

    Things I would have changed:

    Maybe offer moderators like the Brits

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Looks good and fits well.

    Things I would have changed:

    A slightly shorter grub screw so as to protrude less from the hole.

    What others should know:

    Adds a "touch of class" in lieu of the "missing" front sight and restores a finished look.

  • 1.0 1.0

    1.0 1.0

    Verified Purchase

    Things I liked:

    It looked great.

    Things I would have changed:

    Mine was defective... The bore at the front was not concentric with bore at the back where it mounts to the OD of the barrel. There is a chamfer on the inside that is suppose to but up t the end of the barrel, you could feel it pull off entner when you tightened the set screw at the back. I tried shimmimg it but there was no hope for it...

    What others should know:

    Pyramid made it good, Replacement refund or credit... whatever I wanted. I thank them for that. Great Organization. Thanks Again. Jim N.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Looks great and a nice sound reduction

    Things I would have changed:

    Maybe a shorter mounting screw

    What others should know:

    Great price

  • 2.0 2.0

    1.0 1.0

    Things I liked:

    The design, it resembles the old Beeman design and it's made in the USA, but.....

    Things I would have changed:

    The finish isn't very good at all. There are tool marks in the groves and it appears very cheaply made not metal finishing. The anodizing is poor, it looks like the same finish if you took a permanent marker to a piece of steel. A blotchy, purple glossy hue.

    What others should know:

    Putting this on a quality rifle seems like a downgrade because of how cheap the finish is and the tooling marks that are left. I wouldn't have purchased it if I saw it in person first.

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    The item did not well fit the HW50s barrel as was expected. The inner sleeve was too tight and needed stretching and also left scrape marks on the barrel. The grub screw did not secure the muzzle brake and would not hold its place. The device did not work for me and I can't recommend it to others.

    Things I would have changed:

    the metallurgy is too soft and the grub screw does not allow the muzzle brake to be secured to the barrel.

    What others should know:

    look for some other product than this one...

  • 5.0 5.0

    4.0 4.0

    Things I liked:

    easy install and the retro style looks good on my HW50S. Made cocking considerably easier. I still like to use front globe with peep, so it only gets used with scope.

    Things I would have changed:

    nothing

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    -the muzzlebrake plus shim is a tight fit on my Ruger Air Hawk 495 fps Canadian with a barrel of .597" in diameter -the machining makes the ridges a precise 90 degrees, your hand will not slip if your going to grab at this point for cocking

    Things I would have changed:

    A minor detail: -Might be nice to have a few different set screws to accommodate use with or with out shim, to allow the set screw to be flush or slightly sunk into the brake; when the shim is used the supplied set screw sits slightly above brake surface.

    What others should know:

    -re: the machining makes the ridges a precise 90 degrees, this might be a little "sharp" if using this point for cocking and shoot for an afternoon, 5 minutes and some gentle filing will take that sharpness off easily.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Excellent for my older .20 caliber Beeman Pellet that was made in West Germany

    Things I would have changed:

    Nothing

    What others should know:

    Had to put a little bit of electrical tape on the barrel by the set screw for a tighter fit

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    The assorted barrel inserts for fitment.

    What others should know:

    Have a good rubber mallet to tap in muzzle break.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Well made universal muzzlebrake, finish is very nice and it is not too big , adds a nice touch on scoped breakbarrel rifles,that have had front sight removed.

    Things I would have changed:

    Make the muzzelbreak set screws larger .

    What others should know:

    Material of break is fairly soft which makes it easy to modify if necessary. It is a nice looking addition on any breakbarrel, has a very clean look.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    very tight fit, nice matching finish makes my rws48 look sleek without the front sight.

    Things I would have changed:

    i'm sitting on the fence as to the extreme tight fit. challenging to get on but it's going to stay on.

    What others should know:

    for the rws48, you need to use the accompaning 'sleeve', line everything up & hammer it down the barrel with a block of wood so not to damage the finish. it is a very tight fit but looks great.

  • 1.0 1.0

    3.0 3.0

    Things I liked:

    fit well

    Things I would have changed:

    The set screw was partially into one of the grooves so the set screw had only partial purchase on the threads. Soon started stripping and moving. Scarred my new HW50 barrel so I used it with the spacer cut under the set screw so it could catch more thread. May or may not hold. BAD machining to let the screw hit one of the grooves. Not happy with the lax quality control, but at this point my barrel is scarred, so I'm stuck.

    What others should know:

    Use at your own risk!

  • 3.0 3.0

    3.0 3.0

    Things I liked:

    It is a muzzle brake like my old style Beeman brake just a little longer

    Things I would have changed:

    it needs a nicer finish. It should have been sanded better before it was finished. Its a little rough the edges feel a little sharp with small burrs I think it will smooth out with use or sand and a repaint would be ok. Its a bit more than I wanted to spend.

    What others should know:

    Just like other reviews it is undersized to fit over barrel needed to be enlarged to fit over barrel. A barrel style sander did the trick to make the inside a little larger. I would say it was about 20 thousands to small it took a bit of work

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    I liked the ridged exterior...helps get a grip on the end of the barrel when you're cocking it (break barrel spring piston gun). I had my doubts about how well it would be secured by just one set screw, but it worked. Note that it was a little too large for my FWB 124, so I made up a shim from an aluminum soft drink can (I reasoned that it was softer than either the aluminum muzzlebrake OR the steel barrel) and made sure it was under the set screw do it didn't mark the barrel. Everything's good!

    Things I would have changed:

    I still like the idea of having two set screws.

  • 2.0 2.0

    3.0 3.0

    Things I liked:

    It makes knocking open the barrel easier (you don't hit the front sight with your hand) I put this on my Beeman R9.

    Things I would have changed:

    The shiny finish doesn't match the bluing on the R9 barrel.They didn't break the corners on the ridges so they are kind of sharp feeling.

    What others should know:

    The brake shim is too large for the R9 so i had to use electrical tape to take up the slack. Several different size plastic shims would have been nice to make a finished look.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    It fits, great look to the rifle

    Things I would have changed:

    Its made from milled aluminum, fits over my RWS 350 magnum with a little bit of play. I tried the spacer. With the spacer added to the barrel, the muzzlebrake was too small. The set screw tightened it all up but there is a 1/32 gap between the brake & the barrel. It works fine, just stating the facts

    What others should know:

    It does look good, I put one on my RWS 350 in .177 & my .22 both fit exactly the same without the sleeve.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Fits perfect on my New HW30S Rifle and on my Older RWS 24 TO4 Rifle. This Brake works ,looks Good and Low Price !

    Things I would have changed:

    Nothing

    What others should know:

    Comes with Shim with is needed for Hw30S Rifle.Hex Screw is larger than Beeman Universal Muzzle Brake

  • 12 Next

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.
*By subscribing to Pyramyd Air, you agree to receive recurring autodialed marketing text messages to the mobile number used at opt-in. Consent is not a condition or purchase. Msg freq may vary. Msg & data rates may apply. Text HELP for help, Text STOP to 91256 to opt out. Reply with birthday MM/DD/YYYY to verify legal age of 18+ to receive texts. Terms of Use & Privacy Policy.