BKL 2-Pc 3/8" or 11mm Reviews

These are wonderfully machined. The blow away the quality of all my other similar adapters.

The price. But I understand the cost of quality machining uses quality materials.

Although not shown in the photos, there is a third threaded hole in the center on the opposite side of the adapters. It's to allow you to widen the adapters by tiny amounts by using one of the mounting screws to push against the opposite inside wall as you turn it.

very well made a quality product

nothing

makes for a solid mount

Very solid. Low mount. Probably a great adapter use for the right application.

Make them so they fit an HW-75.

I ordered these in the expectation that they would work to mount a red dot on my HW-75. The HW-75 has a rail that is too wide at the top for these to fit. Instructions say to use the center screw to spread the lower portion of the adapter wider to overcome a wide rail. Not possible to spread adapter wide enough to fit on the HW-75. Red dot returned. Adapter kept as it would cost too much to return. Pyramid Air fantastic as usual resolving my problem.

usually I can count on the qulaity

one of the two sets I ordered both sides the thread was totally stripped out right from the box, I have bought these in the past, however the quality control appears to be non- existent these days, Pyramyd replaced them very fast, they were as usual top notch, shame I can't say that for the BKL anymore....

This adapter is a must have for any air rifle with dovetail rail on it. They come in a set and sized perfect for any size ??x??x50 ish.. scope.

May be BKL should come out with more variety powder coated of color choices.

Buy it already!! This will help you mount your scope so much accurately.

Solid as all BKL products are

Simple and perfect

Great fit once you get it on.

Have more play then it has now

Very hard to open

Used in conjunction with a Crossman 459MT mount on an older model Crossman 1377. Excellent for use when you may not have an existing rail or mounting, allowing you to mount directly do the barrel. Allows you to mount "real gun" optics to an air gun

Nothing

As mentioned, allows the use of optics intended for "real" firearms on an air gun.

These are very solid. They look, feel and work like a solid product.

Nothing.

I had one set of rings that would not work with these. The rings were designed to set in 2 slots of a picatiny rail and the second slot would not clear on these adapters. Check your rings before you purchase. I just changed rings to be able to use these.

Very lightweight and heavy duty built

Nothing its a great product

If you're looking for something to get your eye relief Dead on this is the product for you they're great

Great if it worked for what I asked for

Sales should help with the product that I needed

Good quality, work as intended.

Nothing.

Used them as a base to mount a GG&G sling swivel on the front of an AirForce Texan.

Quality manufacturing

nothing

no

Light weight and solid mount for my Weaver sight to my 11mm dovetail.

nothing

To fit the mount to the dovetail required spreading the dovetail clamp. the procedure is well described in the directions and is not difficult.

These Weaver adapters worked great - fit perfect for my red dot scope !!!!

Nothing .... They work great !

Once you know your exact measurements when mounting - everything fits !!!!

Solid easy install.

Nothing.

Made in USA; exact tolerance; reasonable cost

make finish available in silver;

Used moly on the bolts to "ease" the tightening process; must apply a "reasonable torque" for these fasteners to anchor a robust scope like a Hawke sidewinder onto a Springer airgun like a Beeman HW97; but No real need for a torque wrench/ just tighten uniformly until the fasteners "HOLD";

Simple, solid, easy to attach. Price was right.

nothing

no

Well Made nice finish

None at this time

Hoping this will hold under 7.62x54R recoil.