Page 4 - Crosman 459MT 2-Pc Intermount, 3/8" Reviews

nothing

the mounts don't fit flush, at the top where they are rounded off, where the dove tales meet together, one slides under the other. 100% dissatisfied. scope is cockeyed on the gun.

Don't buy this

low cost

did everything recommended in other reviews where people had problems with movement. applied some tape to lower portion of mount, tightened as much as I could without stripping heads of bolts(which was going to happen if I went any tighter). My fix was to jb weld the barrel at the breach and the front sight and then jb weld the mount to the barrel after getting as tight as possible. I only needed one mount since I was putting on a Vism green dot/laser sight combo. These are very small and light. I was very happy after the epoxy job, but didn't appreciate the time needed to make the mounts work.

Very good for crosman pistol

no

no

esy istallation and can be adjusted for different distances for changing to other 3/8 scopes and lsaers

nothing

need to shim under the barrel on the 1377/1322 to prevent it from rotating when in use due to the plastic breech not locking the barrel in

Great value

Crosman should include shims

I mounted them on my 1377 and noticed that the tasco red dot was moving a bit (with the barrel). I shimmed the bottom legs of mount with 1/16 in. rubber gasket material (small strips). Now I got ZERO play... it's ROCK SOLID. I'm very happy with the results. It is a great alternative to a steel breech (available from Crosman for $30 plus $12 s&h)

Nothing really.....sorry

Discontinue this product

Save yourself the headache and purchase the steel breech kit from crosman instead of this cheaper inferior product. In my case the screws stripped, cheap chinese junk, and the brackets are not sturdy enough for anyone who shoots more than occasionally. Do not even think of using a scope, it will be too heavy, my utg red dot sight was even too heavy, it wobbled from side to side. I love crosman and their products but this one is not the answer if you want to add optics to your 1377 or 1322.

good build quality and fits 13xx barrels just the way they should.

not too much to change about these intermounts, they do their job well.

you should know that these intermounts along with rings and practically ANY scope you mount will cause the barrel to flex and move when you use the stock plastic breech. I can't speak for the crosman red dot, which looks lighter. But for the BSA 2X20, a much heavier scope, these intermounts or more specically the plastic breech secured barrel just aren't up to the task of supporting it well. best to get a steel breech from crosman and then you won't even need these intermounts.

Installed easily on my Crosman PC77. They are very light weight. They make mounting a red dot very easy.

The bottom of the mounts don't quite touch the cylinder, so the mounts can twist side to side a little.

The play is enough to throw a mounted sight off a bit. A little strip of thick tape on each side would probably fix the problem well enough.

Price and easily installed.

Nothing

Bought these when I purchased my 1322 Crosman.Installed a Daisy Red Dot sight.Much more accurate than the iron sights.I'm very careful handling the gun because I think it would be easy to knock out of adjustment. But doing the job until I install a steel breech down the line.

Nothing.

This does not tighten down enough to the barrel to really zero in any scope. I suggest skipping this and just buying the crosman steel breech.

Worked great for me on pc77 Now I have a tack driver!

Make bottom radius to fit pressure tube.

Be careful of stripping screws

The only product I have seen that allows a red dot site or scope to mount to a Crosman 1322 pistol or Benjamin air rifle.

Nothing.

This allows sites and scopes with a 3/8" dovetail mount. Very flexible, as it is a two piece design and allows for a good fit for any application with that small diameter area with no scope mount.

Fit well, they do just what they are supposed to do.

Nothing

Reasonable price, simple in design,and easy to install

None

I would recommend to anyone

These are the best, possibly the only, way to mount a scope on the Crossman 1377. They work easily, stay put and do just what they are meant to do.

No changes....please.

While they work on the 1377 and 1322 and many 13xx's perfectly, they MAY present a bit of a hazard on some Benjamins as the feet pinch between the barrel and the lower tube. This can pop the barrel/tube solder joint and destroy the rifle. Use Caution on the older Benjis!

The pieces are well made and easy to install.

Design them to keep the barrel from twisting from side to side due to the weight of the scopes.

If you are thinking of getting these, save yourself the frustration and money and order a steel breech so that you can mount your scope and rings on a solid mount instead of these. If you plan on mounting a really, really light scope (red dot) these may be so so as far as supporting it since it is much lighter.

This was really the only intermount that I could find to be able to adapt a weaver mount to my Crossman 1377c pistol One thing do not over tighten the screws they strip out really easy so I had to buy another one I could have just went to the hardware store and got another screw but I chose to just buy another whole Crosman 459MT 2-Pc Intermount, 3/8" Dovetail just to have spare parts another thing I could not get the weaver mount on without first grinding down the Dovetail mounts to make them just a ittle closer together which was very easy to do once i did that The weaver mount went right on and now I put a Leapers Red Green dot Scope on this gun and I can blow out the centers of targets the size of a quarter with no problems at all

I would definitly use a lot stronger screws because the first one just snapped off with what thought was not really tighting it to hard also i think there should be one thats twice the size of this dovetail mount so you only need to se one and not two and it should probably have three screws to tighten it down to keep it from moving

Works exactly as it should!

it seemed to be stable enough to mount a scope, a neat way to mount mount a scope on my 1377

it was a little high to work for me

Well made, very easy to install, allows the use of dot sight or scope on guns like the Crosman 1377.

The adapters themselves are fine.

I put these on my Crosman 1377, and used them to mount a spare 2.5x scope. At 20 yards I I averaged 4 out of 5 shots in a 1" circle - which is a huge improvement over my performance with the stock sights. The only issue I have is that the barrel tends to twist a bit while pumping, and since the adapters are mounted to the barrel, they move as well and translate that movement to the scope. If you want to mount a dot-sight or scope to your 13xx spend an extra few dollars and go with the steel breech. The adapters are a really nice option for the budget minded, however.