Page 2 - Crosman DPMS SBR Full-Auto BB Reviews

works well

pricing seems to be a little high

I love the fact that its a heavy duty clip and the co2 cartridges are in the actual clip.

Nothing except the capacity a 100 round clip would be awesome.

Works perfectly as extra or spare magazine for DPMS SBR rifle.

Nothing.

Lubricate seals and BB follower will Pellgun oil before use. Be sure to install and tighten left side CO2 cartridge first (FIRST is engraved in the slot retainer as a reminder.) Shop Missouri Tactical for magazine butt caps. Mean and awesome accessories!

Seems to work great! Just make sure you use 12 gram crosman co2 anything else will ruin the mag and wont hold a charge.

How many bbs it holds.

It takes two co/2 cartridges and has an allen key in the magazine so I don't lose it.

This magazine needs a detent at the bottom to slide into and hold the bb follower in so the mag can be loaded easier. I wouldn't recommend using a speed loader with this because the first thing that happened to me was the catch on the speed loader slipped off the follower and as the spring unloaded and pushed the follower up bb's were lodged in between the spring coils and ruined the magazine. I got the bb's out but the spring is damaged not and the spring cannot be compressed to the bottom anymore.

If you are going to use the speed loader, be careful.

Its good quality and It preforms well. Might get another one to have 3

A small slot to hold the spring so we can load the magazine easier. For those of us that don’t have speed loaders

I like that the 3rd one I got finally worked.

Fix the inner valve between the two co2s

Keep your receipt in case it doesn't work. Its not all that bad, the gun is amazing. The magazines need work.

The weight and feel is close to a full mag. I'm sure glad the rifle came with a speed loader.

Make it easier to load Lower the price. 2 of these cost almost what the rifle did.

The weight and function is pretty much the same as an M4. My brothers and son (all of us active or retired from combat arms) love how this is basically an M4. Allows us to teach younger kids how to shoot with a very realistic platform yet not spend the money on lead with every trigger pull.

A reloader that is NOT a cheap piece of crap Chinese plastic. We spend $50 for each magazine, at the minimum, Crossman could make and aluminum or stamped steel reloader that lasts longer than 7 uses. I like the training aspect of a 28 round magazine, however you could easily make the mag hold many more rounds.

Very easy to add other accessories to match my M4 that I carried for many years.

Weight is 1.625 Lbs per Crosman

None, nice weight.

works as advertised

more capacity and the ability to have a clip that is PCP capable instead of loading CO2 cartridges.

auto loader is a little testy but if you lift up and then back down as you load, they will go in. Also, don't overfill the loader as it makes it more difficult to get BB's to load into this clip.

Good quality.

Higher capacity; and latch for the slider almost required, though not needed if the speed-loaded was more useful. Like another comment, I load from a straw. Speed-loader jams too easily. Cost is half again higher than the entire C11 hand airgun -- seems a bit excessive.

Don't fill the speed-loader; maybe half full is good. Straw almost always works better. Heard that steel BBs jam less than copper, but haven't tested.

works great

nothing

thank you for excellent service and great products

Well constructed!

Needs to hold more BB's!!!!!

this is the same as the magazine that comes with the DPMS. It is well made and is easy to load, using the loading tool that comes with the DPMS rifle.

I would not change anything. it works as it is supposed to as long as the loading tool is used correctly. I have loaded all my magazines many times with no problems at all.

This magazine is designed well. When you load it with the loading tool, only fill the loading tool half way. I have used Hornady Black Diamond BB's with no problems in the magazines at all.

Well constructed and very reliable

Excellent feel and quality. Have loaded and fired each of mine 14 times. [ 350 rounds each ]. Absolutely no problems.

The instructions say to pull the clip spring back till it catches to load. It DOES NOT have a catch mechanism. Spoke to Crossman tech and was told that there was a design change after the instructions were printed. That would this be a simple manufacturing addition and make this product much better. That's the only reason I didn't give it the full five star rating.

Having an extra mag is nice

Nutn

You will be using 2 extra CO2s so get ready to do some shooting

Having extra mags when plinking in full auto (or any other time). Even though the speed loaders can fill an empty mag in less than a minute, popping in a fresh clip is only seconds!

I would increase the capacity of the mag, in full auto you can empty a clip in the blink of an eye. Also, a pellet version DPMS SBR would be AWESOME!

Use your Pellgun oil regularly! People underestimate the importance of keeping your seals and rings lubricated. It greatly extends the life and efficacy of those components. And that starts with oiling you CO2 cylinders.

Design

Nothing

A ok I got 3 on all