5.0 (17 reviews)5.0 5.0
5.0 5.0
By Steven from USA on 2019-05-27 00:26:02
Installed this on my Stormrider Gen 1 Went on without a problem. Compared the pressure level against my pump and the pressure level match perfectly will the build in manometer displayed my regulated pressure. No fuss it just worked!
Things I would have changed:So far, there is not anything you need to change. If anything, add small foil of lube for people who don't know the O ring needs a small amount to insert an tighten.
What others should know:When installing the fill valve, take your time and don't rush or press too hard. Make sure the valve screws in with a minimum of hand pressure.
4.0 4.0
4.0 4.0
By Jason from USA on 2019-10-20 23:06:30
Good price, matches the factory manometer, nice to even have the option when installing the Altaros regulator in a Stormrider
Things I would have changed:Not sure how, but in a perfect world I would adapt a male Foster fitting to get rid of the additional fill probe that, for me, likes to eat O-rings, and make it so I could actually see the manometer without pointing the barrel right at my face.
What others should know:If installing on a Gen1 Stormrider, you will have to remove the barrel to get this longer end cap in place to even start the threads. The moderator is just to close to fit the cap otherwise. I cannot day for certain if the same applies to the Gen2 moderator, but it looks like it would still be an issue. And if you have a scope mounted, you will have to remove that in order to access the three screws on top of the breech and remove the barrel. Removing the end cap means removing the barrel again. This comes into play when making adjustments to the Altaros regulator, which has to be removed from inside the reservoir to adjust.
| Sort by: | Date
| Helpfulness
| Rating
|
|---|
| Filer by: |
|---|
5.0 5.0
5.0 5.0
Fill port cover
Things I would have changed:nothing
What others should know:You'll need this if you install a regulator, as the original fill gauge will become regulated pressure
0.00 ratings5.0 5.0
5.0 5.0
Perfect
Things I would have changed:Nothing
What others should know:This is a perfect replace.
0.00 ratings5.0 5.0
5.0 5.0
The Diana fill valve with press gauge is Super. Just had to change the 2 O-rings because it leaked air. Now it works great! I placed it because I put a Huma regulator into my Artemis pr900w, and then the bottom gauge does nog work anymore. But now it's all great!
Things I would have changed:The transportation costs to the Netherlands are pretty high! But in the Netherlands this fill valve gauge combo is not available so that's fine with me now.
What others should know:If you put in a Huma regulator info your pr900w, this fill valve press gauge is the sluiten to be able to remaining see your reservoir press White shooting... Great!
0.00 ratings5.0 5.0
5.0 5.0
The first fill valve didn't work it Had interior parts missing What I like is Pyramyd Air and the Quick time it took for them to send a replacement working valve.
Things I would have changed:manufactures quality control
What others should know:Josh from P.A is a 5 star Service rep.
0.00 ratings5.0 5.0
3.0 3.0
It works
Things I would have changed:Nothing
What others should know:Its expensive
0.00 ratings5.0 5.0
5.0 5.0
Easy to install it does give more consistent shots. Definitely a must with regulator
Things I would have changed:Additional o rings mine broke when t put it in.
What others should know:It will improve your enjoyment of shooting if it does the same for you
0.00 ratings5.0 5.0
5.0 5.0
Everything.
Things I would have changed:Nothing
What others should know:Probe fits, perfect fit, Acurite gauge, and easy install.
0.00 ratings5.0 5.0
5.0 5.0
It installed easily.
0.00 ratings5.0 5.0
4.0 4.0
Adds dual gauge functionality to stormrider to see both tank and regulated pressure
| By Ken from USA on 2020-04-29 |
0.00 ratings5.0 5.0
5.0 5.0
Quality built , adjustable and super easy to install.
Things I would have changed:Nothing
What others should know:This is a must have item for the underated, super accurate Diana Stormrider.
0.00 ratings5.0 5.0
5.0 5.0
Easy to install with the regulator. The upgrade on my Stormrider gen 1 was well worth the money!
Things I would have changed:Nothing
What others should know:Great to know how many shots you have remaining in the reservoir.
| By Ken from USA on 2020-04-29 |
5.01 rating5.0 5.0
5.0 5.0
My storm rider is regulated so I never knew the fill pressure.now I know the fill pressure and regulated pressure. Works great. A must for a regulated air rifle. Installation was a snap.
Things I would have changed:Nothing
What others should know:Very easy install
0.00 ratings5.0 5.0
5.0 5.0
Great product, it provides you with useful information to let you know how your air rifle is performing.
Things I would have changed:Nothing.
What others should know:Buy it.
2.01 rating4.0 4.0
4.0 4.0
Good price, matches the factory manometer, nice to even have the option when installing the Altaros regulator in a Stormrider
Things I would have changed:Not sure how, but in a perfect world I would adapt a male Foster fitting to get rid of the additional fill probe that, for me, likes to eat O-rings, and make it so I could actually see the manometer without pointing the barrel right at my face.
What others should know:If installing on a Gen1 Stormrider, you will have to remove the barrel to get this longer end cap in place to even start the threads. The moderator is just to close to fit the cap otherwise. I cannot day for certain if the same applies to the Gen2 moderator, but it looks like it would still be an issue. And if you have a scope mounted, you will have to remove that in order to access the three screws on top of the breech and remove the barrel. Removing the end cap means removing the barrel again. This comes into play when making adjustments to the Altaros regulator, which has to be removed from inside the reservoir to adjust.
| By Ken from USA on 2020-04-29 |
5.01 rating5.0 5.0
5.0 5.0
Installed this on my Stormrider Gen 1 Went on without a problem. Compared the pressure level against my pump and the pressure level match perfectly will the build in manometer displayed my regulated pressure. No fuss it just worked!
Things I would have changed:So far, there is not anything you need to change. If anything, add small foil of lube for people who don't know the O ring needs a small amount to insert an tighten.
What others should know:When installing the fill valve, take your time and don't rush or press too hard. Make sure the valve screws in with a minimum of hand pressure.
5.01 rating5.0 5.0
5.0 5.0
I purchased this for when i buy the Stormrider and did NOT want to wait if PA was out of stock-like they are with so many Diana products/parts.
Things I would have changed:PA does not have parts illustrations with part numbers for the Chaser/Bandit/Stormrider and they are the sole importer!
What others should know:There is an O-ring behind the pressure gauge. Without one, there is a steady leak. I will post a final rating once I put it on a stormrider.
1.01 ratingBuy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our products (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 21+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
Customer Support
Customer Support
Copyright © 1999-2025 Pyramyd AIR. All Rights Reserved.
By David
This is a great upgrade for the Stormrider. The front gauge is really useful, and is a good indicator of tank pressure if you have regulated your rifle. It also has a rotating cover for the fill port to keep it clean.
Things I would have changed:Nothing, it does what it does.
What others should know:It's a little difficult to get it started, on the Stormrider, because it's longer than the original and will contact the muzzle break, and kind of needs forced a bit at the start. Be careful not to get it cross-threaded.