Page 4 - Leapers 30mm Rings, High, 3/8" Reviews

The rings are easy to install and lock down tightly. A nice set of scope rings for the money. There are nicer, though more expensive scope rings. However, this do the job well.

For the price point, there really isn't much you could change, so I wouldn't change anything.

I purchased these to mount a Hawke Eclipse 30 SF on my .25 Caliber Benjamin Marauder Rifle. It was an easy install and they work great. A good set for the money.

Quality rings, extra screws, and cushion tape installed on upper and lower rings.

Perhaps some type of moly lube on the ring screw threads as they get very gritty upon tightening them up. Aluminum is not a very lubricious non-ferrous metal.

The PA technician originally sold me these high rings to mount a Hawke Eclipse 30 SF with 50MM objective lens on a Benjamin Marauder PCP rifle. These rings are too high for my taste. They result in an awkward high head hold on the stock to get the correct sight picture. Since the gun/scope combo is already heavy and the stock is a bit big when compared to center fire rifles it resulted in a somewhat wobbly hold for me. I requested an exchange for the medium height rings and have installed them with no problems on my Marauder. The result is a much better cheek weld to the stock making it easier to maintain the correct sight picture thus improving my accuracy. Clearance is a bit shy of 3/16" from the top of the barrel to the bottom of the objective lens. With the supplied scope cover the clearance is exactly 1/16". Not sure how much clearance I'll have once I try Butler Creek replacement covers but I suspect they will work with no problem.

Well manufactured, smooth finish, kit includes rings, wrenches and extra mounting screws

Nothing

Solid mount for my Hawke Optics Eclipse SF 6-24x50AO scope on a Beeman R9 rifle

Bought these to install a Bushnell Trophy red dot sight on my PC77's aftermarket steel breech. The rings arrived in 3 days (great Pyramyd Air service!). Very high quality for the price - and no installation difficulties.

Not a thing.

Buy these rings...you won't be sorry.

They seem to work great. Easy to install and allows for plenty of clearance for large diameter parallax wheel.

Very durable, easy to install

Nothing

Be sure you know the size of the scope you want to use with these mounts.

Holds tight and straight on my benji discovery

nothing

Excellent value here

High enough that a 56mm lens does not touch the gun. Not very expensive. They stay put

Nothing.

You might need some medium loctite if your gun vibrates a lot but PCP's do not need loctite.

Perfect finish, look and feel..!!

Nothing..!

Inexpensive..W!! great value..!!

I am not a pro , when it comes to rings, but the very knowledgable gal that took my order , for my Leaper scope, suggested these rings. And they seem like they are strong and will last the lifetime of the scope to be sure.

Nothing

Good value for the money and solid build.

Nothing

Actually forgot to use wrench to tighten the dovetail screws for 45 minutes. Shot very well even with only finger tight screws. Now it hold my Hawke Eclipse very solidly.

Price. Decent quality for PCP rifles.

Nothing at this price.

These are great rings for the price. I use these on my hunting and plinking PCP. They are solid enough for the job. I wouldn't use these on a magnum springer. If you are looking for a budget set of rings for a budget scope on a budget rifle then these are just what you need. Sure, you can go with BKL or higher end rings but for a bang around rifle it is just a waste of money. I have never had any of these loosen or strip out and they are uniform enough to hold a hunting or plinking scope. On my Field Target rifles I go all out and spend the extra but for my Marauders or Crosmans I don't see the point. These hold the scope tight and level and I don't worry so much about dinging them up.

easy to install, very strong, and well made.

nothing!

Solid, secure.

Add a low set. Currently there is just medium or high.

They may not be dead on straight. You'll have to adjust windage.

Went to so many sporting goods and gun shops and none of them had a clue where to get a set of these rings and if they could it would be five times the price plus a three week wait. Not here. Got them in a couple days and worked great!

Solid construction.

Nothing

Beautifully constructed, very stable and the friction tape that they put on inside surface.

Nothing

Solid construction, easy installation.

Nothing

Nothing really. They are solid rings and work very well with my Leapers 4-16x50 scope.

Great pair of scope mounts. The screws clamped down secure without stripping.

Didn't know it but dovetail means .22 or special mounts other than picatinny or Weaver. It fit nicely around the scope but didn't fit my rail. This is where I found out the bottom was a dovetail mount. My mistake. I exchanged them for the proper ones.

I had to exchange this for a Picattiny mount. Pyramyd Air was fantastic. The communication through the exchange process was flawless. I had an exchange within days of reordering. They actually shipped a replacement before I even sent the old one back to expedite the process.

Well made and nicely finished. Solid and accurate grip on 3/8” or 11mm rail.

Nothing.

Excellent mounts and a real bargain at the price.