Page 10 - Leapers Accushot 1-Pc Mount w/1" Reviews

Very rugged and probably overkill for its purpose. I preferred the 1 piece model for perhaps better alignment. Easy to install. I installed on a Hammerli Nova rifle with a Leapers scope and obtained remarkable accuracy.

Nothing.

Great value. I don't see any reason to pay more for a different product.

Simple effective design at a reasonable price. High profile for larger scopes Came with a couple extra screws just in case.

Solid construction with 3 set screws are a winning combination to keep the scope where I want it ! ( ON TARGET ). This scope replaced the srappy ones that came with my Daisy Powerline 1000 S. ( Same as Winchester 1000 S ) It can hanndle the recoil of "springers" with no problems at all !

maybe see-through underneath.

I would recomend it to anyone wanting a better scope platform.

Good design. It works great.

This is a good scope mount. I don't think any changes should be made.

I got this scope mount for the Crosman XT Storm. It has a really big rear sight that is a little visible in the bottom of the scope with this mount. A higher scope mount would be better to clear the sight from the scope completely. The mount is a great buy for the money.

i liked that it was all in one piece, and everything lined up perfect, it didn't move when i shot my gun, i reccomend it to anyone.

nothing

I like that it's one peice and has three solids screws to clamp into place. Mounted perfectly on my RWS34. It only took a few shots to get it zeroed in. I mounted a scope with a 3-12x44 scope and had about 1/2" clear from the barrel.

No changes needed

Does not move. This mount stays where you put it.

Nothing

I blue locktite the three screws on the scope rail.

Stable....no scope movement

Would like some medium profile

This works on both of my Air Arms tx200 mk3's. I also have the same mounts on a 30mm and currently both guns use Leapers Swat 4x16x50 or 56 and 8x32x56 with side wheel AO and I have no issues PERIOD.

Nothing.

I use these on all my rifles and have no issues to date and I have massive size scopes that takes a beating. Do not over tighten the allen screws on any mount and you will never have issues and take your time doing it.
Take your time installing it and pay special attention to how you adjust the stop pin. That is the most common mistake everyone makes because you either stick out too far (it tilts the scope base) or too short (it floats and shears stop pin holes). Look at the way it tilts and align it so it is level PERIOD.

Great Mount , Excellent Value , Highly Reccomended

Nothing

Getcha One

This is a very sturdy mount and a nice piece of machining. Scope seems rock-solid.

4 screws on the dovetail clamp.

Great scope mount at a reasonable price.

Well machined and designed, instructions were clear and concise, and it was cheap. Worked perfectly out of the box on my R-1 with no problems at all.

Nothing

Price. Clamping strength.

Nothing

I had no scope stop so I needed a 1 piece mount. I have over 500 shots since zeroing scope and can still cover 10 shots with a nickel at 30 yds.If you degrease your rails and all parts of this mount and use LOC-TITE this mount is rock steady.

Very solid mount, my CenterPoint scope doesn't move one bit with this mount. It works great on my Gamo Varmint Hunter. I took a few shots with my new scope and mount and noticed I was 2 3/4" low. I adjusted 48 clicks up and wasd punching the same holes at the top of the bullseye where I like it. I was about to re-zero the elevation nob and noticed I was already on "0". My windage nob was off just 10 clicks off to the right. all this was at 20 yrds. once I clicked it back and reset it . It was good to go! took a starling right off my fence. dropped it with a shot to the back with a predator pellet.

Absolutely nothing!

This mount is worth the price! I love they send this with extra allen screws...

Excellent product. Solid mount. After firing ~ 100 rounds to break in my Crosman Quest 800, I mounted a BSA scope with this mount. I had no problems zeroing the scope. The rifle shoots accurately and consistently. I haven't had to tighten any screws. Nothing has come loose.

Nothing.

Money well spent. Hex keys and spare hardware included. Easy to follow installation instructions.

nothing

mount needs to be adjustable

Installed this mount on my RWS air rifle and with scope centered it shot so far to the right I didn't even try to adjust the scope. Reinstalled my B-Square mount and hardly had to readjust my scope. Go figure?

I have never before seen a ring & mount set with a spare screw for all the sizes used in the set. The sticky tape used inside the rings is a nice touch and saves the user the trouble of adding it themselves. The quality of this item is fantastic considering the modest asking price.

Not a thing

Great quality, easy to install, well made, great product.

supply some blue loctite for the set screw, mine fell out.

great product for the money!

Great solid mount. I am using them on my CenterPoint Optics 6-24x50mm scope and they work perfectly.

Nothing.

Highly reccommend this mount.

Best one piece mount for the money in my book. The set screws hold but I must tell you I use loctite on my set screws on my scopes.

Can't think of one thing!

Great for money and the quality is second to none in my book.