Date: 26/4/2024 11:10
Refurb SALE: 20% off Select Refurbished Items SHOP NOW *

*Offer expires 04/30/24 at 3 a.m. ET. Some exclusions apply.

Page 2 - Mantis 1" Rings, Medium, 3/8" Reviews

Mantis 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap

Average Customer Review

Rating 4.54.5 (37 reviews)
1 star
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

Sort by:
Filer by:
  • Previous 12
  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Perfect match for Hawke 40 mm with 1 inch tube to mount on Benj. Marauder with dovetail mount.

    Things I would have changed:

    Nothing

    What others should know:

    Steady mounts.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Bought these for my new Umarex Gauntlet to mount a Alpen Kodiak 4-12x40 A-O Wide Angle scope. These were reasonably priced and high enough to allow easy access to the Gauntlet loading slot. They have a locking screw to keep the scope from moving backward or forward. First shot was inch low and inch right. Happy with that.

    Things I would have changed:

    Nothing comes to mind.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Good mounts, very robust and sturdy.

    What others should know:

    A bit of Loctite and never any problems being loose.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    doing there job well.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Fit Marauder .25 reciever dovetail perfectly

    Things I would have changed:

    Functionally they work. Could be rounded more...

    What others should know:

    For 1" scope tubes

  • Rating 3.03.0 3.0

    Rating 3.03.0 3.0

    Things I liked:

    easy to set up, and clamps seem to hold ok

    Things I would have changed:

    nothing

    What others should know:

    these will work fine on a pcp, but I would not trust them on a hard shooting springer.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Solid, and inexpensive

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Seem to be sturdy

    Things I would have changed:

    Nothing

    What others should know:

    Give them a try they work

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    excellent fit and feel. Bolted up with no problems

    Things I would have changed:

    nothing

    What others should know:

    Required to clear the magazine on the Benjaman Maurada.

  • Rating 4.04.0 4.0

    Rating 5.05.0 5.0

    Things I liked:

    Looks tough

    Things I would have changed:

    Streamlined a little would look nice

    What others should know:

    Works great good value

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    These work great on my .22 and .25 Marauders and for other PCP and CO2 guns. Even for Springers up to R-7 (HW30 & HW50). I actually prefer one piece mounts for high powered spring and gas ram guns.

    Things I would have changed:

    Nothing. Perfect for (see above)

    What others should know:

    Nice machining and finish. Can't beat the value for the price.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Nice strong hold, inside has no scratch tape stuff that protects from scratching the scope

    What others should know:

    Fits on the marauder and leaves room for the magazine!

  • Rating 4.04.0 4.0

    Rating 5.05.0 5.0

    Things I liked:

    Nice look, sturdy, seems to be holding up well on my Benjamin Discovery.

    Things I would have changed:

    There's a bit of an angle on the dovetail clamp... makes the setup look cheap.

    What others should know:

    For the money they work well on a PCP. Haven't tested under the rigors of a spring gun.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Well made, seem to be nicely machined. Four screws on top, two on base for each ring, plus a stop pin - securely mounts your scope and stands up to abuse by spring powered rifles.

    Things I would have changed:

    Lower prices are always good :) A slot on the bottom of the stop pin could be handy.

    What others should know:

    A good value. I'm using this to mount a 40mm objective scope and it provides adequate clearance, but I did have to remove the rear sight.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    no sharp edges , stought and sturdy

    Things I would have changed:

    not a thing !

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Easy to install. I prefer 4 screws per cap as this tends to hold the scope better.

    Things I would have changed:

    A better explanation of the reason for a hole and screw in the center base of one of the rings and how to properly set the screw into the hole in the receiver of the air rifle.

    What others should know:

    Check all screws periodically to ensure the scope does not move.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Mounts seem well made for the cost. Necessary allen wrenches are included.

    Things I would have changed:

    Nothing - reduce price without sacrificing quality if possible ;-D

    What others should know:

    Mounted my Tech Force scope on my Air Venturi Bronco perfectly. Huge improvement over the CenterPoint scope included with my Remington Vantage NP.

  • Previous 12

Buy With Confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Want More?

Join Our Email List for News and Deals!

Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.