Mendoza Micrometer Sight, 11mm Dovetail Reviews

excellent quality for the price

none

nice upgrade for an air rifle sight that has limited adjustability

Made of solid metal, nice click adjustments, seems to hold its zero just fine. My son just outshot everybody in his 4H annual competition with this sight on an RWS 34. It works well.

I'll echo what other reviewers have said. First, you will need a tall front sight for this; your existing front sight will probably not work. I fashioned one out of a 1" tall stainless steel bolt and it works well. Second, I had the same problem one other reviewer had, with the jaw of the clamp snapping off as I tightened it down. It seems to continue to work okay, but I was surprised. Be careful as you're tightening this thing down.

Has its relative flaws, but for the money it's a very good deal. Yes, I would buy it again.

really liked the adjustments and seems to be well made

n/a

got this for my TF99 and works great.

Positive clicks on wind and elevation knobs well built great price

Paint build up in the sight. just need to clean it up with a small file. Still for the price not to bad

Price is hard to beat, solidly built, positive clicks.

Not much. Maybe engrave LR and UD directions?

It is not difficult to install this sight on Webley Tempest air pistol by making custom 11 mm dovetail rail from a piece of steel angle.

Its well contructed the mechanics seem very good.

The size: its a hunk seems like too big for the rifles i have tried it on.Better yet they should send some instructions with this sight so as to help owner in relation to its adaptability.

you gotta play it by ear with this product.

Solidly built and click adjustments feel good

A peep option and reduce the height (even with the elevation bottomed out, this sight still sits about an inch high)

You need about a 1inch tall front sight post to be able to use this rear sight. If you have that, it is great price for a good sight.

Well made, good quality for the price. ease of adjustment.

Needs to be sold as a pair as with a matching front sight. Have an aperature as well as the V type sight.

Sits too high for use with most front sights on guns with stock sights. Does not have peep sight option. Practically useless as it is for most air guns.

All metal and precise.

The knotch on the sight is too wide and the sight is too tall.

I was really looking forward to having a good sight on my AR. When mounting the sight, the whole edge of the movable jaw broke off. I was using a torque screwdriver at 25in lbs. The sight should have held up to this with no problem.

This one unit may have been defective. The overall workmanship of the sight is very good.

That it will fit on a .22 lr so its dual purpose.

make it a Peep sight again.

everything worked fine for me on all 7 that I purchased.

Solid construction and finish

Windage and elevation knobs would turn smoother. However, usage might solve the problem.

Requires slight modification for use with crosman steel breeches. Front sight will need to be elevated on most airguns. Daisy globe sight mounted on a Crosman 459 intermount worked for me. It required no modifications to the barrel or the front sight and the only tools required are a set of allen wrenches.

Once the Mendoza is mounted it is solid and elevation adjustment for distance shots is quick and easy. If your shooting requires frequent sight adjustments and you don't mind making a few minor modifications, this sight will help make your airgun a good solid shooter.

It's made of metal, not plastic. Solid clicks for elevation and windage adjustments.

The notch is too wide for a long barreled gun. I mounted this sight on a Gamo CFX after removing the scope rail, mounted it directly on the compression tube grooves. And the entire hood and front sight fits in the notch with LOTS of space on the sides. And as noted above, this sight is TALL, even cranked down to the bottom it shoots a foot high at 40 yards.

It's a solid sight and well made. It has possibilities but is not a simple "bolt on" proposition with no other mods needed - at least for my Gamo CFX.

positve clicks on elevation and windage knob adjusment, very sturdy.

too tall, slightly over 1" from dovetail to top of sight blade when adjusted to middle position.

I thought this would be a good low cost alternative to a Williams notched sight but it is just too tall. I have yet to find a front sight tall enough to use with this sight. In hindsight, I would gladly spend the extra $40.00 for the Williams.