Shooter's Choice FP-10 Lubricant Elite Reviews

Low Oder, works on all parts, all guns ,wont destroy finish and works great as a pellet lube. I not sure pellet lubing does anything for accuracy how ever the bore never rusts and lead build up is consistent reducing the need to clean and strip lead from the barrel.

Nothing

Not much to tell its oil it works for my needs.

Superb value for money. Made my new guns shoot like butter. My newly bought Sig Sauer p226 X5 was having trouble cycling rounds after a 30 rounds on a co2 cylinder. It would not always load rounds and fire blanks. I decided to lubricate the gun. Works like a charm. Now it cycles reliably till the last shot from a CO2 cylinder.

Clean, lubed and guns are ready to go!

nothing

Great for cleaning barrels, great for lubricating moving parts and Pellets. And it don't stink.

Thick, "sticky", good general lube.

None.

I use lots of specialty lubes on my PCP and this is primarily pellet lube for me. Works great!

good overall lubricant

nothing

none

Cleans lead well, protects against rust

Run a clean patch through the bore after and you won't have problems with dieseling.

...are that the combustion temperature is very high and the freezing point is very low. Works great on preventing rust. Doesn't wash off or lose effectiveness like WD-40 or other rust prevention lubricants.

nothing

Using too much causes "flyer pellets" that drift off every now and then on a good grouping.

Great rust protection, cleans lead well without being a caustic cleaner. Seems very similar to CLP break free.

Note that it is not recommended to springer chambers.

This will diesel if put in a magnum springer chamber, it is petroleum based. It is excellent oil for firearms etc, but I don't see the reason to call it magic oil or anything. I have found a couple drops on a mop and it cleans the bore nicely.

Works great on my Sig 226R and other non air guns!

I would have researched it more, now I know. Good oil, not really for airguns though. This is basically another version of Break Free CLP.

This is a petroleum based product folks, don't put it in your chambers or on any rubber parts. Good for protecting the bluing on nice guns, that's about it. There are much better higher pressure oils for triggers and other moving parts on an airgun.

Just GET IT!!

Yeah, you'll never use anything else after trying FP-10.

excellent product and very good attention

excellent product and very good attention

FP-10 doesn't burn when pellets are shot out of the barrel @ 1000+ fps. I use a couple drops on a pipe cleaner and remove the lead out of the barrel.

nothing.

Use a couple drops of this every 100 shots to keep the lead out of the barrel rifling and your rifle will shoot more accurately.

Very good lubrication, and can be used for a light bore cleaning. It will give you your arms a durable coating, and can resist very high temperatures. I use it in a rimfire .22 for cleaning, and worked great for conditioning the bore. It is a must have.

Nothing

To clean lead, use a bronze or nylon brush.

FP-10 is being used in Iraq as it is the only lube that can actually penetrate the metal parts on fully automatic weapon systems that were suffering jams doe to the fine dust being attracted by other lubricants. That and it isn't as easily burned off in high heat as most other lube's. It is first rate stuff. I use it here in the Lovett Knife shop daily.

Now that it is available in an aerosol as well. Not a thing!

Helps in bbl. leading in the higher velocities associated with high power PCP's. Once you clean the bore and dry it, use the FP-10 to gain a lot more shots between cleaning. Mike

It makes it posable to shoot Crosman premiers that otherwise lead a boar very quickly.

i wish it wasn't needed but it is. My PCPs all thrive on this stuff.

Its not just good for airguns. I have a few Microtech OTF knives ranging from 5 to less than one years old. The action got sticky on one and it was hard to push the button. Two drops of FP-10 fixed that. I never had to apply any more after that. This is the good stuff!