Springfield Armory 1911 Mil-Spec CO2 Reviews

I think it's an excellent replica, very nice, the recoil system works very well, it has good power.

I would change the design of the BB charger, after spending three pipettes, I wanted to mount a fourth pipette, I vote the CO2 and a fifth and I vote the CO2, I review and I see that the charger was split at the base. The base is very weak at the end where BBs are introduced.

I LOVE the gun itself and I also like the ease of use this magazine provides as I find it easy to load with BB's and CO2.

I will say that I had to order this magazine because of a recurring issue with seal failure which I have been unable to resolve. I have seen other comments and complaints about this issue with this (and other) magazines. I recommend that PA and Air Venturi come up with a magazine REBUILD KIT and/or a price reduction for the mag itself. From brand new I only got about 5 reloads of air cartridges before the seals failed completely. Some attention needs to be paid to this matter. This excellent replica pistol deserves a mag that will hold up to regular usage.

NEVER, EVER leave partially used air cylinders installed in the Mag between usage. I'm sure this probably contributes to early seal failures.

I like the weight and solid fell of the magazine and relative ease of loading the BB's and the CO2. I will say that I had to order this Mag after all the seals failed on the one that came with the gun so it's a "wait and see" as to how this one will perform. The seals in the original only lasted for 6 or 8 reloads before giving out. Thanks. For the record, I had the same issue with the Springfield Armory M1 Carbine Mags as well.

Can't think of anything except that seal KITS should be made available for purchase for customers that have the means and expertise to make repairs. I would also recommend that buyers should be cautioned to NOT leave air cylinders LOADED in these mags between use. I would also recommend/hope that Pyramyd/ Venturi Air find a way to make the cost of these Mags a bit more reasonable as the price is somewhat high in my opinion.

In my opinion I would recommend that you Do NOT leave half used or full CO2 cylinders installed when the gun is stored or not in frequent use.

I like the co2 pistols, in particular the blowback replicas. I may use them a lot more than the average person, but I think they are a great training aid.

The cost needs to come down substantially. I can purchase magazines for a real 1911 for less money. The manufactures need to offer a tool kit and rebuilding supplies if they can't design these to last more than 30 or 40 days.

I don't aim to pick on the 'Springfield Armory 1911 Mil-Spec CO2 .177 BB Gun Magazine', this complaint I am voicing pertains to all of the magazines that contain the co2 cartridge in my personal experience, the Sig Sauers, Swiss Arms, Barra, Springfield Armories, and Berreta's. I am particular to the 1911 models but all of these guns I have been very satisfied with, and the full metal guns have not given me any issues other than the failure of the magazine seals. I use these in conjunction with the Mantis shooting performance system and in the last 2 years have logged more than 10,000 shots, but these magazines don't last more than 90 days for me, this last one failing last week, purchased 10/30/2002, it's now 11/11/2002. This is of course nothing more than my opinions based on my own experience. I do not want to bad mouth any particular maker, and if any of you don't know, Pyramyd Air has an excellent customer service reputation, and well-earned at that. Maybe I just over use them.

Nothing

Magazine sticks when inserted into the weapon (Sig Sauer 1911). Won't release and drop out as normal and has to be pried out.

Wait for Sig Sauer to solve their supply chain issues and get your magazine directly from them.

This magazine is a quality product that performs as expected

nothing

Nice to have additional mags for each pistol/rifle I own!

As you drag the spring down to fill the magazine with BBs, when you reach the end, it has a catch that holds the spring while you drop in BBs. Much better than holding the spring down with one hand while dropping BBs on the floor and into the magazine. When the magazine is full, you just push the spring follower down and it snaps up against the last BB inserted.

Not much else, it works fine.

Keep your C02 cartridges fresh, I had a problem with a couple of old ones.

Springfield Armory 1911 Mil-Spec CO2 .177 BB Gun Magazine are awesome awesome awesome awesome

Nothing

The Springfield Armory 1911 Mil-Spec CO2 .177 BB Gun Magazine are awesome awesome awesome awesome

everything about this is great , and I can't wait to use it this coming summer along with the Springfield Armory 1911 Mil-Spec Hand Gun.

Nothing

Nothing

Price & quick processing.

Well. Maybe a few less marketing emails.

The feel of the gun is just like the 1911, making it potentially a decent practice substitute.

(1) Have it come with a spare magazine. (2) Make it easier to load the magazine. I have to use something like a drill bit to push each BB into the mag. (3) Figure out how to make the slide release when the slide is pulled back, like on a real 1911 (4) Improve the accuracy. A shot that is on target at 15 feet is six inches too high at 13 feet and 5-6 inches too low at 18 feet. (5) a little bit more power. Not enough power right now to flip my airgun reactive targets.

Having an extra mag

Mag needs a notch to hold back spring while loading

Nope all good

Metal construction seems solid.

It needs a better way to load BBs. Perhaps a simple hole in the mag like on the Luger. Definitely painfully slow to load

If you buy the 1911 you will want a spare mag both because they are slow to load and for practice changing mags

This magazine is very good full metal very easy put on the gun and now is on special.

i find nothing

loading a pain mags a bit pricey but all said and done a super great pistol great price on pistol super value for your money don't think about buying just buy it nuff said

change nothing maybe price on mag

yups have fun when you get yours buy all means you will enjoy and have much fun with this pistol

The ability to use a speed loader to refill BB's

Larger capacity. Unbelievable that you can go through the 18 shots as fast as you can.

Buy 2. You'll need them.

Worked as expected

nothing really

fits perfectly

well made

loading unnecessarily difficult unless you have long thumb nail

should cheaper

Shooting function of the mag.

Drill a 3/16th hole above the tension spring in the locked loading position. You can load the magazine five times fast as loading the it from the top one BB at a time in the original configuration.

Make the magazine great after drilling the 3/16th hole to speed up loading.