Page 2 - TenPoint Alpha-Nocks - Red Molded Reviews

Push all the way in till you use the lighted nock part I've shot these with no issue

The two pice nock is a bad idea. The rear nock is too loose and falls out on impact with harder targets such as 3D targets. Expensive for how poorly they perform. Tenpoint should scrap the 2 piece and replace with solid one piece nock. They do fit the string well and they don’t wear out serving sting which is nice but not happy retrieving bolts with nocks missing after the shot.

Two of the six alpha knock receivers crumbled in my fingers when I went to install them

The Alpha-Nock fits too loosely in the nock receiver. I purchased 6 replacement lite sticks and alpha-nocks for my Ten point EVO X bolts. If you are walking into your stand pre-light and have to walk anywhere other than a perfectly manicured path, remove the alpha-nock from bolts (if bolts in a quiver and your carrying bow with a strap). If you brush against bushes or limbs on your way in, the nocks will fall out easily. I lost 3 nocks on my first hunt before daylight. Fortunately I brought the other 3.

I wish you still didn't glue the nocks in or give an option to buy with or without glued

The nock is good the receiver suck. You have to be carful when putting the nock in or you might break one of the three fingers. If you break one then you have to replace the receiver. This is with the Alpha-Brite

The bolt flew straight and killed the buck however, after the clean pass through in the rib cage the battery was laying 5 feet from the bolt and I never did find the knock.
That’s why I bought these replacement knocks.

Good price and good nock and receiver and make the bolt safer and fly stright.

The Alpha-nock bolts are grate shooting looking forward to hunting with them, hope to get the lighted nocks.

The Alpha nock/receiver combo is nicely accurate. The 0.300 ID version seems slightly undersized (or my shafts are larger). When pulling the nock out to replace them- care must be given of it is real easy to bend the tabs of the receiver at which point I won’t trust them and have to replace that too. The nock also sometimes pops out of the receiver on impact resulting in loss. I wish Tenpoint would make a solid Alpha nock- not a fan of the two piece design and wish for a simpler option for practice.

I don't like that I need special nocks but understand why they are needed. My M370 is accurate and love the bow except for the lousy trigger that has a lot of creep and is not crisp at all.

Titanium one is light accurate finish on the boat easy to cock just an all-around great bow

Ordered these to repair some damaged arrows and to add to arrows that didn’t originally have alpha nocks

Good concept, poorly executed. Nock design and quality are Ten Pt quality. However coloring makes them useless as lighted nocks. Blocks so much light that they cannot be followed in flight for tuning or bolt placement on game, even on video. Does not help find bolts. I realize these have strengthening fibers but color is not needed. If these could be made clear and BRIGHT they would be the ultimate nock.

does the job but had some issues. the way the nock is set up, I've lost a few, unless you are in a building range, you won't find them if they fly off, which happens on impact. Hitting a morrell die with the Turbo M1 has made me lose some. If just using for practice, glue them down or have stand bys

Easy to use. Great quality. Would recommend to friends

Nicely put together easy to use. And do not damage my serving

Great nocks and great service- Can't beat Tenpoint!

Got these to replace the aluminum nocks the came with six of my arrows in the Vapor RS470 package, so all twelve arrows would be the same weight. No problems with them at all.

Great system. I had Omni 2.0 and all I had to do was use the replacement Alpha's in my existing receivers.