Page 2 - TenPoint Bednar Perfect Puller Reviews

I was at the ATA show when I came across the ten point booth. After several minutes of talking to the gentleman at the booth he gave me a Bednar arrow puller. My brother was with me and asked what the guy gave me. I told him, I probably just got a piece of junk arrow puller that they probably could not sell so they were giving them away. We laughed and I thru it in my bag. Several weeks later I was shooting at my block target, If you ever shot at one you know the arrows are hard to get out. I remembered my free gift I got. I ran in the house and grabbed it. Boy was I really suprised, the arrows came out with ease. It's the handiest tool I've ever seen to remove arrows. It's light weight, strong, grips and pulls the arrows right out.

My crossbow shoots around 360fps with 20 inch bolts and I shoot at a high density crossbow targe. The bolts go into the target about 70% of the way making it very difficult to remove them. The different rubber grips on this puller gives me the best grip on my bolts when removing them. Most pullers will not work as they damage the fletching. No problems with this puller. Switch rubber jaws in a matter of seconds to accommodate arrows.

I purchased the arrow puller for pulling arrows out of 3D targets because I'm losing grip strength. I found that the puller is also very handy for changing nocks and extinguishing lighted nocks.

Absolutely one of the best arrow pullers I have ever used. I was hesitant about the plier style at first but it feels good and pulls bolts effortlessly. The previous pullers that have had my 12 year old son was unable to use but with the Bednar puller has has no problems retrieving his bolts now.

Greatest arrow extractor I have ever owned! Grips the shaft using the different size rubber grips - squeeze the handles and pull the arrow out of the target.

These pliers work better than the simple split rubber cylinder type. These have a shorter contact area so you can use them on arrows that have penetrated almost all the way up to the fletching. The handles seem to give you better leverage than just squeezing a rubber lump.

The Bednar Arrow Puller is simply the best arrow puller tool I have ever used, and I have used quite a few! With my faster 10Point crossbow, I found pulling bolts with broadheads a real challenge withartheitis in my hands. The Bednar puller made removing bolts with broadheads an easy process even when buried really deep in the target.

The Bednar Perfect Puller saves your bolts and your hands. When you put in a lot of practice, you are bound to ruin a few bolts when pulling them from deep inside your target. The Bednar Perfect Puller will be you best friend. Nice tight grip on the shaft allows for better extraction of the bolt. Saves time, frustration and your bolts.

It has the grip my hand could never get on the bolt to easily pull bolts out of my target with ease.

I use this bolt extractor to pull bolts from my block type target. Its firm grip allows me to pull the bolts straight out without torquing the shafts.

Absolutely one of the easiest arrow pullers I have ever used. I was hesitant about the plier style at first but it feels good and pulls bolts effortlessly. I used to always rip my fletchings pulling the bolt if it went in too far, not allowing me to grab it by anything but the fletchings. I haven’t ripped a fletchings since buying this product A+

Best design and ease of use that I have found on the market. Easy grip allows for ease in retrieving a bolt from any target without damaging the fletching's.

I got tired of struggling pulling out arrows from my target. They would be buried up to the fletching. I was afraid that I would pull the vanes off they were that hard to pull out. Once I got this puller, it was easy as pie!

I was having difficulty pulling my new carbon arrows from targets. I tired a cheaper puller that did nothing but damage my arrows. Tried the perfect puller, and well, it worked perfectly. I recommend it.

I was a little skeptical at first but after I pulled my first bolt out of the block target I won't shoot without this. I have not had a single bolt I couldn't get out

Makes pulling arrows out of foam targets very easy.

I think the rubbers need to be impregnated with something or a different kind of rubber material alltogether. After shooting carbon arrows (bolts) into a rubber block you can squeeze the life out of the tool and it just slips making you have to use two hands to remove the arrow. Without some kind of improvement I don't believe its worth $20.

The bolt puller has been a very good purchase, because of the speed and penetration experienced with the crossbows. The puller makes removal of arrows from targets much easier!

Works well in puling bolts from targets, although the rubber grommets have a tendency to fall off. A label would be helpful on the grommets so you keep pairs together.

My arrows would still be in my target without this