Page 4 - Umarex Universal Steel BB Speedloader Reviews

Do Not Like

It needs to be one piece,it spite into after using(2) times.

This product is to cheap for you to sell,everything that I have recieced from your company has been outstanding.The main BB exit hole of this piece needs tobe changeable to handle heavier BB's(that's what happiened to me-put in black heavy BB and spite the piece into-).

NOT HAPPY WITH PURCHASE........

THE AD READ THESE ITEMS GO ALONG WITH THIS GUN WWII M712 CO2 auto pistol.....THIS SPEED LOADER DOES NOT FIT THIS GUN...........!!!!!! JP NOT VERY HAPPY........!!!! JP

Not much

better directions

For the m712 Broomhandle it is faster to load the magazine directly rather than use the speedloader. It is tedious to load and use.

Fairly well made and a really valuable aid compared to hand loading magazines with BB's.

It was suggested for the Legends M712 Full-Auto CO2 BB Pistol, Full Metal, but none of the adapters fit its magazine.

As near as I can tell, it works ONLY with the specified models and their clones (if such exist). Exceptions would be guns with a fairly large circular loading port.

The Idea

Make it work 100% ! It had a fitting to fit my CP99 Compact. It fits but the plunger works about 30% it jams in the loading chamber or it won't load bbs into the loading chamber. I took it apart it looks like it should work but looks and doing are two different things

I can hand load 6 magazines in the time it takes to shake rattle and roll 1 using this. Great idea but I've read other reports similar to mine and some worse. It is Cool to have, until you go to use it! Bad Product!

The idea is great. Actual function is terrible and extremely frustrating. I would not even give it a "half a star"...unfortunately, in order to click the submit button and leave this review I am forced to give it a "1 Star"

Make it work like it's advertised...maybe a little more quality control!!!

Same design as the loader for "Airsoft 6mm plastic BB", unfortunately it does not function nearly as good, the airsoft version works flawlessly, this one does not.
I figured it might be because it's new and I might need to figure out the fine points to get it to work properly "no it's not me". The major problem appears to be the bb plunger channel is too big allowing the bb's to offset and not track perfectly straight one behind the other. This causes an obvious jam as the bb tries to exit the loader port while pushing on the plunger. I've spent more time trying to get the loader unjammed then it takes to load the clip one bb at a time. This thing is destined to become a target "soon"

It works. I bought it for my Walther PPK/S. Not Very smooth and would not fill the mag all the way. The tip kept coming loose. I will try it on my S&W M&P and see if it works better.

Certainly beats handling the BB's individually!

Not much-all things considered, a good value for the price point.

Poor performance if there is any deformity with the BB's (rust, etc.). I opened a NEW container of Daisy BB's and the half of them that were rusty would not feed through this loader (fault of the BB's, NOT the loader).

It works well if you are patient enough to figure it out and maybe clean up a few manufacturing quality issues.

Quality control and nothing else. It it was made well it would be perfect.

If it jambs when you first try it loosen the small phillips head screw next to the discharge port. If this does not work you might try using a drill bit (no drill just use your hand) and twist it in the hole to clean out any rough edges. If that does not work, do not give up, send it back and get a replacement. When you get it working you will be glad you stayed with it.

nothing'

that I ever bought it.

don't buy it, it doesn't work.

Nothing

Should not have purchased it!

This thing would not dispense any BB's other 10 ea in the direct stack.
Filling full, half, partly would not work at all and just locked up completely. I had to take it apart to clear the jam and see if there was a burr somewhere, but could not find anything. It did not cost enough to justify sending it back.

Maybe I should have paid for a 10-for-10 checkout, but that would have doubled the cost.

I would suggest that PA NOT offer this product for sale. The pellet pens work much better, but only hold a few bb's.

Well, it's certainly priced right...

But the one also has tendency to get what one pays for .

At 10 bucks it's not exactly going to drain your retirement fund, so it's worth the "I'll take the risk to see if it works" challenge.
In this case, the Umerex 712 mauser is not a happy combination with this item.
But no big, little risk, went into it eyes wide open, in experimental mode with limited expectations, and maybe it'll work with the next acquisition.
No blood, no foul, I say so I'm giving it a good recommendation as there was nothing misleading and with the proper magazine, maybe it would work just fine.

Everything. Two pushes, 15 bbs with one left over. Big loading port.

Nothing

I put a puff of graphite in with the first fill because I had read many negative reviews. I also bought two marksman speed loaders because I knew they were good. No comparison, the umarex wins hands down. Mine has never jammed. It occasionally fails to recharge but a shake or cycle fixes that. I am using mine to fill a daisy 15xt pistol which requires no adapter. I have probably shot a couple of thousand bbs and it's still as good as new so far as I can tell. As I mentioned, I can't comment on the adapters, since I don't use them.

This is a great way to handle BB's. Loading BB's with this is just great. You don't have any problems with dropping and picking up BB's you drop. I use it with most guns without having to attach an adapter. I just pump the BB's into the hole. Nothing could be easier.

Great item for the price.

You may want to have an extra in case you misplace one.

Easy loading accomodates a lot of air guns with the adapters ease of using

add more adapters

Sometimes it sticks but overall a great item

Nothing. Would not recommend this item and will be returning it for a refund. No worth the money.

Produce s loader that actually works. I bought this to reload the magazine that came with the Colt WWII Commemorative .45. Not knowing which adapter to use I called the Pyramyd staff and was told that no adapter was necessary. I found that the loader was much too difficult to use and that hand loading was by far the better solution.

A speed loader that actually works would be a big plus. This one does not fill the bill.

The idea that I could easily load my BB magazines.

Everything, it just does not work, always jams, very often you cannot depress the loading plunger. A waste of money.

The adapters were nice.

Did not work A All co2 powered bb when I used it on my c96 and my browning Hi Power mk3 bb guns. When I loaded bb's into it all it did was jam up. My airsoft quick loaders of the same style worked fine .

The attachments make a great difference in speed loading for sure. This product is definitely worth the money!

The plunger I think would be a lot better if it was metal. You must load gingerly I've noticed for it to load faster.

Worth every cent especially with the new attachments. They all work perfectly with all the different brand guns I own.

Nothing

Jams right out of the package

You can load by hand quicker, don't waste your money on this product