UTG 30mm Max Strength Rings Reviews

Excellent quality

Strength, looks, cap screws. price

In my opinion, these are not low rings. I got them to lower my scope because it was too high using a 10 inch droop picatinny adapter. I have low rings from Weaver, these are not low by any stretch of the imagination. The Weavers don't hold the scope good enough to resist the springer recoil, so I'm stuck with these, at least until I find some actual low rings that will hold.

built very rugged

nothing

there very nice for the price

Sturdy, well made, easy to install.

No comment.

Used the UTG 30mm Max Strength Rings on a high power Diana sidelever rifle. So far, after 600 shots, the rings have gripped my scope securely. The scope has not moved. Rings aligned perfectly when I mounted them. No need for lapping. Good deal for the money.

rugged, beefy, lightweight, good quality overall 30mm rings...

nothing

Black Sturdy Twist-lock Allen wrench included Extra set screws included

I would prefer that there not be adhesive lined inside the rings.

I have several scope rings from UTG, and I feel like the twist-lock base model is the easiest to use, and they're exceptionally sturdy. You have enough space to fit your allen wrench completely through the twist knob to give you more leverage to shore up the rings to your rifle or base. The adhesive on the inside is functional, but I've had to adjust my scope an excessive amount for barrel droop, and the adhesive leaves kind of a mucky sheen behind once the scope is moved.

Compared to other Leapers models in 30mm:

30mm Rings, High 3/8" Dovetail
30mm Rings, Medium, 3/8" Dovetail
30mm See-thru Rings

I preferred the twist-lock base to work with the most.

Very heavy duty but lite at the same time. Well made product!

Nothing

Nothing

Easy on off thumb screws, 4 screw caps steel mounting clamp.

Make them 3.5mm lower, they sit pretty low but another 3.5mm lower would be perfect with my Barska Euro AC10010 6X42 that is mounted on my Nitro trail.

With this setup I shoot at 1/4" bulls and group 1/2" - 3/4" at 33 yards using H&N copper 8.80grns round nose.

Well built mount. I've had no problem with them.

Do away with the tape on the inside

Verry hard to line up with the tape in it. You can't twist the scope. When you get it in place though it wont move

Overall its is a very fine product. The scope stays in place all the time.the pellet always on target 30 yards,consistent product for that price.

Make the rings little bite lighter.

Good product for air guns that have barrel drop.

Solid mount. I especially like that UTG puts a kind of tape inside helping it to hold a scope from slipping without over tightening the caps.

I would include some extra tape for shimming or replacement should the original tape become worn. I used these rings on several rifles during some test procedures. I am very happy with them but they looked a bit worn when one installation was too loose. The scope moved taking the tape with it.