UTG Accushot 1" Rings, Medium Reviews

Fit my BSA 2x20 Pistol scope perfectly to mount on Benjamin barrel adapters (11mm - 3/8") fastened over the stock sights (no removal necessary) on my new Benjamin 397 (177 pumper)

nothing

Snug up one screw and move on to next one going around all screws with even pressure until nice and snug for whole rig. Do not over tighten anything. All will stay in place when nice and even snug of all screws.

good mounts screws do not loosen

nothing

Worked as advertised!

solid and tight - you can tighten these down and now worry about striping the threads

nothing

Worked perfect for my steel breech modification to a 1377 and 4x scope addition.

My use in on a Maurader air rifle. Scope has a 44 mm objective. I still have clearance with the barrel shroud. I feal these are just fine for a PCP . No need for 4 bolt rings. Quality is good. Not what I would choose for a springer.

These are quality scope rings that I really like.

Nothing

Quality build, fit and finish.

Put these on a Marauder 11mm dovetail with no problems at all. Grooves match nicely. Just add a touch of oil to the threads as they tend to chatter and will want to gall if over tightened.

Great rings that are easy to install and work great

nothing

nothing

Sturdy and they work

Smoother corners and lighter.

They work well and Ill purchase another pair when I need to.

Nothing

Work well on lower recoil airguns. I would use 4 screw designs on higher recoil airguns.

They work, are easy to install, and don't cost very much.

Nothing - good to go as-is.

Adding a scope to my 1377 made a HUGE difference!

seems to be a very nice ring for a great price

nothing

works well witht he benjamin discovery.

These are great rings for the money, hold tight and fit well. I like the two screw hold downs because it keeps the width of the rings to a minimum which gives you more room to get at the loading port especially with the small scopes like the bug busters. Ken Wilson

Nothing

Thes work great with the Crosman 2260 SE and the 1760 SE series rifles even with the large target scopes.

Low price

nothing

Have mounted on my .25 Mrod with a 4-12x40 scope, works well and looks good. Great rings for the money.

included for use on different guns

clean cut and nice looking. nice threading on the screw holes. grip tape privided is better then some scope rings ive seen.

My rings came with the grip tape on only one of the rings, cant see how it could hert to have them on both, but holds the scope nice and tight.

I had no problem with tightening the screws, and was able to make the screws pretty tight on the scope rail. have had scope rights come with some pretty soft screw or the hex itself was not very clean looking, but if you use a good allen driver or make sure the allen keys provided are not starting to give you shouldnt have an issues. in my experence most problems of allen screws stripping are cause by the wrench, not the screw itself.

I love the tape. Scope isn't marred and it will stay put IF (see below) you can get the Allen Head screws snug. The tape is about as thin as two layers of skin, so don't worry about it (Unlike a certain product that was reviewed either by BB on the blog or in the video, I don't remember, that had electrical tape in the front ring. It isn't like that at all.) Very great addition to a basic ring setup that makes it a great value.

The screws. I went to install the scope on my dove rail and the heads striped and wallowed out without much pressure at all. I tried it to see if it was tight enough. It held its zero for about 10 shots and then slid up the rail. Couldn't do anything about it because the screws wouldn't stand the pressure. You could cinch them up to where you could feel resistance, but nothing more.

They are a great value. When you get them pull all the screws, the four from the top and the two from your base and head for your local hardware store. I worked in the hardware industry for many years and know poor fasteners when I see them. This is the case here. By all means though buy this product! It's a great value that just needs a little tweaking.

Good sturdy metal, spare screws and allen wrenches, simple instructions

nothing

very well made for the money, easy to install, used these to replace the junk rings that came with my nephew's Daisy Powerline

These rings came free with the purchase of a Leapers Red Dot Sight, so that was a plus. They work great on my Crosman 1077.

Nothing.

I bought these rings to mount a pistol scope on a Crossman 1322 air pellet pistol. The rings were perfect for this application and would probably serve anyone well with a low recoil firearm. The workmanship and materials look very good and performed perfectly.

Nothing.

I would not use these on a spring powered pellet rifle because they only have two scope mounting screws per ring. I would use the rings with four scope mounting screws per ring for a high recoil application.