UTG Pro US Made 30mm Reviews

Even those these are listed as high rings they’re going to raise your scope about 1.5”. Which is perfect if you need them for clearance or your head position.

Nothing

Very high quality. I’ve used these rings many times and I’m never disappointed!

Solid and well made.

Nothing.

Great product for the price.

I mounted these rings on a RAW HTN1000x. They are very well made and use Torx screws which don't strip out loke allen cap screws. The high rings were tall enough so the scope clears the magazine. Overall I would recommend these rings.

I can,t say I can find anything I would change

These are massive rings so they are a bit on the heavy side, but for a bench rest rifle this is not an issue

Super nice, wish they fit

Will not fit my Eagle Claw Picatinny/Weaver rail. The part that fits in the slot on the rail measures .201" and the slot on the Eagle Claw measures .195". Its close. But know this and its 50 bucks. Having a semi-issue w/ return...Dude said.... "Normally, I would send another set but because of the value of these items, I will have to reach out to my department supervisor for additional support"...i had to send pictures w/ vernier calipers measuring the items. Which is fine and i know its a new item but it may just be for Picatinny only, and not Picatinny/Weaver...apparently theys a slight diff...live and learn. A shame because they are sweet

Very well made. USA made , the best

No changes

No

Great rings. Really like that they are use made

None

Buy them

The rings are very good, sturdy and efficient.

Pyramid, please ensure sales people are more informed on product accessory matches for products. Otherwise Pyramid, Great Job!!!

However, I would not recommend these rings for the Impact to be used with an ARGOS BTR Gen 2 scope. The POI is too high and the rings are not adjustable to compensate. Therefore, on my new scope I have very little vertical alignment adjustability, especially at close <100 yds range. I will have to purchase adjustable windage/elevation rings. Currently a waste of my money on this purchase.

Nice rings. Well made and secure lock up.

Nothing

I never heard of these rings before. I'm very pleased with the price, fit and finish. They are perfect for my FX Crown. I usually go Nightforce or Seekins but that's too much for an air rifle. These aren't cheaply made. Highly recommended

Excellent value for the money extremely well made. Was installed on a FX Wildcat MK2 Compact .25

Nothing

Great rings. Quatlity is excellent and "/LBS was included in manual. Nice.

These are not what I wanted but the height adjustable weren't available. Would like lighter but just as strong a material for the price.

Either have a gunsmith mount for you so you get right mounting or buy the tools which will last a life time. I bought a torque driver, a dual plane laser leveling device and used both the forward sighting and LED thorough the scope to get levels. The dual plane I used to be sure the rifle stock and scope were level vertically . Took a bit of work, but my HS geometry class was the wisdom I needed to make the scope nearest to perfect. Sight in was then very simple.

High, solid mount. Plenty of contact area for the scope to (hopefully) eliminate sliding.

Make these for Weaver and they will be interchangeable with Picatinny.

Picatinny and Weaver are not always interchangeable. These will not fit the Hawke Weaver mount without modification. The locking lugs are too big for the slots in the Weaver rail. I fixed this with a file. Otherwise, I am quite happy with them. Mounted on a HW97 with Hawke 10-50X60 ED scope.