Sort by: | Date
| Helpfulness
| Rating
|
---|
Filer by: |
---|
4.0 4.0
4.0 4.0
4.0 4.0
Ease of use. Easy sight adjustment. seems to be consistent. Good value for the money
Things I would have changed:Trigger pull is difficult. adjustment doesn't improve travel nor creep. Very hard pull. Haven't weighed trigger pull.
What others should know:Pyramyd air Very good. Quick shipping and information.
4.0 4.0
5.0 5.0
2.0 2.0
Very robust gun, virtually kid-proof. Smooth and powerful. Tactical look. Mostly steel parts, even the end cap and rear sight. Basically a cut-down rifle.
Things I would have changed:Better quality control. Better trigger.
What others should know:I got the one that's called 'remanufactured' and soon found out why. The rear sight could not be adusted high enough to make up for the barrel angle. So I installed a reflex sight.
At one point I was getting 1" groups @10m, but lost it. Again, I think it has to do with barrel lock-up, a common problem with break-barrel guns. There is an adjustment for that, but it didn't work for me.
The trigger pull was long and stagey, but there is an easy fix. Just re-install the adjustment screw upside down on the trigger so the round head bears on the transfer bar. Dremel a screwdriver slot on the small end.
4.0 4.0
5.0 5.0
3.0 3.0
The Gas Piston delivers consistent power, from 50' the accuracy was only OK with 3" groups of 10 rounds with the shots going both low or high depending on how much force the breach is closed with.
Things I would have changed:Tighten the barrel closing spec's
What others should know:Good for plinking, I wouldn't trust the accuracy to hunt anything with it.
5.0 5.0
5.0 5.0
5.0 5.0
Easy cocking, fun to shoot, and it accepts almost every pellet you give it. Tight fit for Sig Saur copper plated rounds and HP.
Things I would have changed:Make the rear sight easier to remove. I had to use a rotary tool to take mine off.
What others should know:Even though it's not very powerful, it does shoot consistently.
4.0 4.0
4.0 4.0
4.0 4.0
The no need for a CO2, Easy cocking, the power , the price, the balance, the low report, the cocking assist that I leave on all the time and shoot.
Things I would have changed:The factory should sight this gun in better before it is put out for sale. I have had to turn the rear sight at least 4 full turns just to get it near the bull.
What others should know:This is a heavy gun. I am making my own wooden X support so I have a bull hit every time. In the manual it states better to not adjust the trigger , for me this was untrue. I adjusted the trigger and now get a nice even squeeze, nice and smooth. Great shooting to all Thank You Craig
4.0 4.0
5.0 5.0
4.0 4.0
I like it as no CO2 is needed and no cheap seal to leak. Hold it with two hands and on something good accuracy out of the box. Cocking it is ok also.
Things I would have changed:Nothing, so far so good.
What others should know:Sights are very bright, wish every gun came with them. The feel of a small rifle. I named it my " Dirty Harry" about the same size in length.
4.0 4.0
4.0 4.0
5.0 5.0
Well, I see some don't care for this one. I have only shot mine a few times but it works well. I was shooting Daisy Precision Lead Free Was Cutters and shooting at a very close range (I shoot mostly indoors now as I'm disabled ). I have an indoor range for BB and Pellet pistols and shoot mostly from 10 to 15 feet. That said, the gun began shooting low but the adjustment worked well and (at least at the closer range) is very accurate and consistent.
Things I would have changed:I wish the rear sight was a little better and possibly that they had grooved the receiver or added a rail so a low power scope could be added easily.
What others should know:The cocking assist barrel extension is a little "cheap" and I was careful so as not to break it. Once it's on you pretty much need to leave it there as (again) it feels a little "light".
4.0 4.0
5.0 5.0
4.0 4.0
Velocity and accuracy for the price. Very easy to cock with the cocking aid!
Things I would have changed:The trigger has a terribly long and spongy travel. Needs to be reworked! I tried using the adjustment screw behind the trigger but it was already turned all the way in and when I backed it out a couple of turns, it only made the trigger worse! I have read that others say it's a two stage trigger but I couldn't feel it! I also could not get it to hit to point of aim with the cocking aid not attached to the gun. However, it shot 50 to 75fps faster with it OFF of the gun. The solution was to chuck the rear sight and put a red dot on it! Now I get consistent 3/4" groups at 10 yds. with the Crosman 7.4 grain pointed pellet and around 550 fps. This was the most accurate and highest penetration pellet out of the dozen or so I tried and it's inexpensive!
What others should know:The pointed Crosman pellet out penetrated the slower heavier Gamo Rocket pellets with the metal tip and the much lighter and faster Gamo PBA ammo in this gun through both wood and sheet steel. As always, try as many different pellets as you can to see which one your gun likes best! Also found that you can use the muzzle end of the cocking aid to safely cock the gun thus eliminating the need to attach and detach every time I cock it. See above as to why I don't leave it permanently attached!
1.0 1.0
2.0 2.0
2.0 2.0
I like Benjamin guns. But this thing is crap, they need to go back to the drawing board on this one. the back sight is all twisted to one side, the trigger pull is more like 12 pound than 7. the weight is all up front. they say it will shot 625fps and it will only shot 400fps. and mine after just seven shots would not cock after that. I am in the process of sending mine back and never want to see another one. i have two benjamin trail np rifles,a 950 fps and a 1100fps and like them alot.
Things I would have changed:just about ever thing
What others should know:No for i think they know allready.
2.0 2.0
2.0 2.0
4.0 4.0
Well, I like the concept of using a 'NP' (nitrogen piston) instead of a metal spring. My understanding is, unlike the metal spring, if you forget to UNLOAD the tension from the piston, there should be no negative repercussions. The metal spring would be likely to weaken from the prolonged compression. Unfortunately, the 'reconditioned' Benjamin Trail NP Air Pistol I paid for seemed to still have issues. So I ended-up returning the thing.
Things I would have changed:The rear sight seemed to be unable to adjust for enough HEIGHT at distances over around 40-50 feet.
What others should know:Yeah_ stay away from RECONDITIONED air guns just to save a few bucks; not worth the possible aggravation ;-) . I have to commend 'Pyramid Air' for "DOING THE RIGHT THING" by allowing me to send the thing back on THEIR nickle and giving me the choice for either an exchange, a refund or store credit. HOORAY FOR THEM! Now, if I can just get them to spell 'pyramid' the correct way...? - hee hee hee
5.0 5.0
5.0 5.0
5.0 5.0
Really enjoy
Things I would have changed:Nothing
What others should know:Buy from Pyrimid Air
4.0 4.0
5.0 5.0
4.0 4.0
This is a fun gun to shoot, easy to load and quite powerful considering the small size of the nitro piston. It has a long site radius which contributes to it being fairly accurate and certainly a great can killer at 15 to 20 yards.
Things I would have changed:The air gun I purchased was "remanufactured" and appeared to be in new-type condition. Upon test firing, I found that the plastic or nylon seal allowed a great deal of the air to escape straight up between the barrel and the main tube junction. I added two duct tape donuts (the same size and shape as the seal) to the back of the seal which solved the air leak problem. There was a marked increase in velocity as well as a rise in the point of impact.
What others should know:Although the air gun looks better without the cocking aid, I leave mine on all the time as it is difficult to cock the gun without it.
3.0 3.0
4.0 4.0
5.0 5.0
Very accurate out of the box, especially after replacing rear site with red dot scope. (rear site comes off with a some careful prying, left to right)
Things I would have changed:It's heavy, requires steadying, especially with the heavy inconsistent trigger pull. Longer adjustment screw tends to jam cocking and may defeat safety. If the trigger pull were improved it would be awesome.
1.0 1.0
2.0 2.0
1.0 1.0
Its a Benjamin and its nitro
Things I would have changed:Better sighting system a longer trigger adjustment screw in a little less weight forward
What others should know:This is a tough one the gun is promising with post - 600 feet per second but Benjamin needs to go back to the drawing board on this one
4.0 4.0
5.0 5.0
4.0 4.0
I bought this pistol from another retailer because I had a gift card, otherwise I would have bought from Pyramid. I was intrigued by the nitro piston as I have an Umarex Fuel rifle which I really enjoy shooting. Turns out this pistol is a lot of fun too. I did not have a problem with the stock sites and it was easy to get the rear site adjusted for targets at 10 to 20 yards. Much more powerful than the CO2 pistols that I have. Single shot is slow and deliberate but much slower in burning through pellets. It puts a good whacking to tin cans.
Things I would have changed:The grip texture, particularly in the front is very aggressive. I cut a section of a 26" mountain bike tube and slid it over the grip. Much better.
What others should know:I got a good deal on a red dot and wanted to mount it on this pistol and found the same problem as the gentleman in a previous post. It seemed that the rear site was crimped on. I was able to pry it off with some effort and luckily no damage to the tube. The red dot works very well with this pistol and adds another dimension of fun. You can't beat this thing for the price. I am thinking of getting another for our family Christmas gift swap.
4.0 4.0
4.0 4.0
4.0 4.0
My review on this gun disappeared somehow. I like the nitrous piston power plant, cocks fairly easily with the cock assist, nice grip and trigger, glo sights are nice touch. Overall, not a bad gun and fun to shoot.
Things I would have changed:They should mention in the instructions how to sight this gun. Lots of complaints about the sights being worthless. Not true from my experience. I also think the cocking assist should be integral to the barrel or a better means of cocking. Would also be better to have an automatic safety so beginning shooters do not have accidental discharge, but they also can be trained to pay a bit more attention to make sure of safety with this gun before they get into shooting powder powered arms.
What others should know:As I mentioned in my prior review, I called the manufacturer (Crosman) about the low shooting issue and they said to move the rear sight about a half inch forward. Worked like a charm and no need to be hacking away on the sights or changing out screws designed to work with this firearm. This is not a very powerful pistol, but it would be great for silhouette shooting and plinking in general.
By FRED from USA on 2016-11-22 |
By FRED from USA on 2015-11-03 |
4.0 4.0
5.0 5.0
4.0 4.0
Got a great deal on this gun locally, last one they had marked 1/2 off. Shoots smooth and quiet. Easy to cock with supplied handle.
Things I would have changed:The screw on rear sight needs to be longer. I ran out of adjustment and the gun still shoots low with the cocking handle attached. Get rid of the FO sights.
What others should know:To me this gun feels unbalanced and muzzle heavy. It is also quite large compared to my Webley Tempest. The grip surface is fairly sharp and started to bother my hand after a while.
If you remove the cocking handle the POI will raise about 2" and the shooting low problem goes away.
The gun will be harder to cock but not too bad.
The trigger.....well, this is an inexpensive gun, don't expect too much.
My best group of the day at 20' was 1" offhand. Many times it would put 3 shots into a tiny cluster then put the other 2 an inch away. Not sure if it's the gun or my meager pistol shooting abilities.
After about 200 shots for break in I put 10 Crosman 7.3 gr pellets over the chrony and got a high of 539 fps, low of 514 fps, with an average of 529 fps.
Overall, a fun gun to play with, has no problem perforating cans, fairly accurate, and quiet.
By Tom from USA on 2016-01-31 |
By FRED from USA on 2015-09-18 |
1.0 1.0
1.0 1.0
1.0 1.0
size - nitro piston
Things I would have changed:sights are very bad, inconsistent power from nitro piston ? ? (defective ?), inability to consistently hit a 5" circle at 50'
What others should know:I have shot benjamin pistols for years and
thought their quality to be outstanding until
I purchased this one. It looks good, but
dose not live up to its name and is not
worth the price as has lost quality, accuracy,
and workmanship.
3.0 3.0
5.0 5.0
1.0 1.0
The power is awesome
Things I would have changed:better sights
What others should know:This pistol shoots extremely low, even with the rear sight adjusted to the max
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our products (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 21+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By Michael
Well built and solid feeling.
Things I would have changed:Nothing
What others should know:This is a large heavy air pistol that few holsters fit it with the barrel cap on.