Page 7 - H&N Field Target, .22 Reviews

if you shoot a benjamin np titan (or trail) look no further for accurate ammo-- 12 yards with cheap 4X scope and I get 1 big hole very accurate

Typical H&N, Very clean, consistent and accurate.

Nothing.

The skirts on this pellet are a bit wide for My Talon SS. They fit but it takes an extra push with my thumb to get them seated properly. JSB's seem to fit the breech better.

Very accurate

Nothing

Very deadly and and dead on!

Clean nice form.

Nothing

Had quite a few fliers from my Benjamin Marauder .22 and didn't group well. Including fliers groups averaged 3 inches at 35 yards. Typically 4 fliers out of 10 shots. After testing many pellets can't put all the blame on the pellets so give them a try in your gun.

First, my RWS 34 seems to really like these pellets, as shown by small groups at 25 yds. I have several tins of these as I shot pretty much every day. I shoot more of this pellet than any other. Can't beat the price, number pellets per tin and it's ease of hoarding.

Nothing

Make sure you try many different types of pellets in your air gun, you might be surprised. Proper hold of the gun is extremely important of accuracy.

These pellets seem to work well in all my air guns with good accuracy. This is a good pellet to start with.

500 to a tin.

Don't stop with what seems to be the perfect pellet, but keep trying other pellets. Try sample packs where there are 6 or 7 different pellets.

Top quality pellet.Consistant size with very little variation. Slightly larger than Crosman HP.

Sell in smaller packages (100) or make a sampler pack of different size heads so airgunners can try them out too see which size works best in their gun.

These worked great in my Benjamin Genesis. Before, the best I could do was 1 inch groups at 20 yards off a bench using Crosman HP, but now it will do 1/2 inch groups.

Very high quality pellet.

Nothing.

I have a Gamo Big Cat in .22 cal. that I tried over 20 different pellets in and could not get a group smaller than 1 1/2 inches off a bench at 20 yards. untill I tried these. Now it will shoot a 1/2 inch group.

Everything. Accurate in every .22 i own.

Price could be a little lower.

Fromm springers to co2 to pcp, these things are money. Find the head size that fits and stock up. Great pellet.

My Diana 34 loves these pellets the best, and always perform great.

Nothing

Try them in your springers

I bought a tin each of the 5.53, 5.54 and 5.55mm head diameters. I could not tell any difference between them. They all had some variability in size in each tin. They shot no better or worse than Crosman Premiers from tins or box, so for the price, I'll stick to the CP tins.

This is usually a top line pellet.

Tins were marked 5.53mm heads.These varied from 5.48-5.56mm.Useless,to say the least.Velocity&groups were all over the place.

Shame on current H&W QC!!

These are 5.53 size. They are very consistent in size and can do 1/4" hole at 35 yards on iron site.

nothing except for lower price

Work very well out of hw 80 and hw90, not so well out of Theoben eliminator

Very accurate. Fists and shoots great in my Diana 34. I have used for small game huning and they work really well!

nothing

I purchased these pellet in 5.53, 5.54, and 5.55 to test on Hw80 and Hw90 since the 5.52 had great size variation. All three thins had much better size consistency than 5.52. The 5.53 and 5.55 worked well in Hw90 but had some bullet drop on HW80. The 5.54 shot very randomly out of both guns. None had good accuracy out of Theoben eliminator which only likes baracuda pellet.

Nothing

The pellets seem to be consistent and work well if the barrel likes them.

This review is for the 5.53 head size version. The quality and uniformity appear excellent. It's a matter of trial and error to find the right pellet for your gun. This pellet in the 5.53 head size is DYNAMITE in my Tx 200 MK III! Before these, I was shooting boxed Premiers. This pellet transformed the accuracy from very good to WOW! The velocity also went UP from 720 with the Premiers to 740 with the FTT 5.53's! I'm stocking up!

The only thing I can complain about in the packaging is having to scrape the leading edge of the safety tape on the lid to start peeling it.

It's a matter of trial and error to find the right pellet for your gun. Head size makes a big difference, and there are few pellets that come with different head sizes. For example, this pellet in the 5.54 head size shoots poorly in my TX 200 MKIII, with much lower and less consistent velocity.

I lube my pellets with Krytech/Finish Line wax in a cereal bowl. Typically 20 drops in the bowl, then I pour in the pellets and flip them around like sautéing veggies for about a minute until the solvent in the wax evaporates away.

uniformity, accurate, good price for 500 count tin.

nothing.

These pellets (5.53) work excellent in my Benjamin Titan NP .22 just had adjust scope POI down a few clicks and I was shooting 1/2" 5 shot groups at 30+ yards. At times if I watched very carefully I could actually track the pellet to POI. Now I know if I miss it was defiantly my fault. I will be getting more for sure.

Love these!!! They do the job and get rid of the pests once and for all.

Nothing

Very accurate in my nitro venom dusk,for me,one of the best pellets out there.

NOTHING

Give these pellets a try,you will be sorprised.

good pellet when a good tin is bought,

The pellet edges are sharp and susceptible to nicks easily two of the tins I have opened so far has about 40% defective pellets, they are short and fall to middle of the barrel loosely, need to blow to the other side to get them out.

Very sensitive to little nicks on the skirt edges,the skirt edges are sharp and nicks happen very easily if the tin is not handled very softly. CPHP are much more rugged