JSB Redesigned Monster Reviews

The quality

Probably have 500 pellets in the tin. The 10.34s aren't smaller by much and the tin of those has 500 pellets.

It is my favorite .177 pellet out there, alongside the older 13.43 monsters. My Walther Dominator 1250 likes the redesigned a little bit more than the older ones. I run them at approximately 870 fps and the accuracy out to 75 yards is amazing. It surely is confidence-inspiring when hunting, spoken from a guy that owns an FX Impact with a power plenum in .22 and a Weihrauch HW 100 in .22 as well. In most hunting applications I tend to reach for my .177 Walther, and that is saying something....

New Design, Fly very well

-0-

You won't know how well your rifle likes them, unless you try them. My .177's love them!

They shoot very well out of my FX Maverick Compact and normally I would shoot the JSB Exact Heavy 10.34 pellets but this has been an excellent pellet for my FX Maverick Compact.

Nothing!

I've tried the JSB Heaves at 10.34 grains and the JSB Exact Beast at 16.20 grains but the JSB Monsters at 13.43 grains is the right pellet for my FX Maverick Compact.

No good for me. Skinny heads.

Pyramid should allow customers to select the 4th free tin. I ordered 2 tins of originals, 1 tin of redesignes to experiment with, expecting originals to be the 4th free tin. Instead Pyramid sent redesigns as the 4th free tin. No price difference.

I measured head diameters of 100 pellets. 90 were 4.50-4.51mm, 10 were 4.51-4.52mm. My Avenger shoots 4.52-4.53mm the best.
10 shot Chrony string of originals - Standard Dev ~2.
10 shot string of redesigns STD ~ 5.
I won't be ordering redesigns ever again.

Weight

Wish it was listed that they wont shoot out of a break barrel or maybe I got a bad tin

Will not shoot out of a Gamo magnum gen3 Gamo whisper fusion Gamo swarm maxxim or a uremex/ruger springer.

I shoot the heavy 177 redesign JSB pellets and they are consistent in my Springer. Pyramid Air service has been stellar. Timely and well insulated packages every time.

Some return customer coupons and free shipping when you can.

I shot quite a few groups from my FX dreamline with this pellet and the original one, The edge to accuracy definitely lies with the redesigned monster the ballistic coefficient is slightly lower with the redesigned pellet however. As with any mass-produced pellet there will be flyers but 7 out of 10 will group just over a half an inch at 50 yards, that's at 953 ft per second.

Offer a match version of this pellet, sorted for size and without flaws

This pellet it is really only suitable for high velocity guns. Normal pellet backstops don't work it will penetrate two thicknesses half-inch plywood

Quality Control, all pellets equal dimensions

None

One of the best pellets for your rifles and pistols.

everything

nothing

Very accurate out of my Asp20. In my opinion, the original 13.43 is just a bit more consistent.

Nothing

Stop making them

These pellets are anywhere from 15-25 FPS slower than the originals,and they are less accurate. Im Shooting them with Bull Boss w/Huma reg at 155 bar @ 970 FPS with original,and 940-955 with the Redesigned. Not happy.

Pyramyd Air packaged these pellets in their own foam so they would not bounce around as some other packaging. Quality Job One

At this time nothing

Great product

Work very well in my Mach1, Swarm Maxxim, and Swarm Gen2

Very high quality product. The size and weight are exceptionally consistent from pellet to pellets.

Nothing

Im getting sub MOA @ 50 yards with these pellets in my Air Arm EV 2.

I have now passed through the 2500-shot mark....with these Redesigned .177's in a AirArms S-500. Accuracy is (linearly) degraded with these specific pellets....when S-500 power is dropped (incrementally) below the highest power setting. I achieve 930FPS on highest power setting. It appears 910FPS (or below)..produces inaccurate results. I ascertain a 1.63" (10-shot groups...multiple times...consistently) at 100-Yds with a good heavy bench (yet; not a gun vise). I speculate a vise would generate approx. MOA (or very slightly below MOA) resultant. Remember; this planform does NOT follow diabolo (steep wasp-waist) velocity/speed incarcerations; hence, higher velocities are required. Aerodynamically, it is almost a 'slug'. The transonic 'window' on this design...is substantially smaller; hence, authorization of (unsuspectingly) higher velocities are required (and encouraged). Down-range energy retention (measured in FPE) is superior for a (barely) diabolo design. I surmise BC = .039

Why must there be only ONE redesign pellet on the market....and as a extra-heavy entrant into this airgun World (with subsequent) --very limited-- restricted (niche) application. It is my strongest (geophysics) recommendation that a 10.34g (and 8.44g) redesign achieve invention/inception.....so the BULK of the airgun World can employ-and-enjoy this tremendous euphoric planform attribute(s). (Beating a dead-horse): THREAD the lid. (Still: No bent skirts encountered...in 2500 rounds).

It is my strongest recommendation these specific pellets should ONLY be utilized in PCP's.....AND.....that can generate ABOVE 910FPS. If not; you will not like this platform. (This is a VERY common --unsuspecting-- easy to make: error with this pellet; hence, sometimes the 'bad ratings'). Because I have a launch platform that can generate (just barely) above 910FPS....I (now) have ZERO other pellet platforms in my inventory. ONLY the redesigns. I am DONE with steep wasp-waist "air-brakes" pellets forever more. RID the diabolo wasp-waist's!

Very, very accurate. Great fast shipping from PA.

Need screw on tin. A bit expensive. Provide head sizes ( I prefer this for all higher quality pellets, every tin should list them )

These shot amazingly well out of my HM1000, tested at 50 yards they would group near or below MOA at about 820 fps. I'm guessing they'd shoot fine at faster speeds as well.

Pest pellet for my .177 hatsan flashpup.

N/a

Be careful

also I ultimately returned them

The original ones they were great the last two guns I have either one they've been too small so I went to the redesign and they were also too small when they fit they're really good

Either Chinese people need to start making barrels more consistently or people making pellets need to start making more consistently or both

Benjamin barrels seem to be a little too big .gamo fits perfect ruger was a little big

These turned my air arms s510 tdr into a true hunter . 1.25 groups at 100 yards and great on jack rabbits

Nothing

Mediocre grouping with all other pellets but these are .5 at 50

These pellets really shine if you get them over 900fps Shooting these out of an FX Crown, once I went over 900fps groups went from 3/4" at 50 yards down to a crazy 1/4" pellet on pellet.