Page 2 - Seneca .25 Cal, .25 Reviews

Nothing

The consistency is awful! Multiple flaws in shape and size. I'm going to melt them down and make my own slugs out of them.

They don't fit in a Hatsan Bullboss magazine.

N/A

2mm shorter...

AT44 Hatsan magazine is too narrow. the pellet is too long

I really like the uniformity of these pellets, not one was bent or dented. If shoot at the right speed and out of the right barrel twist rate one can experience true accuracy.

Not enough in a tin.

These may not be the best for your gun so experimentation has to be in order.

I Like The Pellets But I Was One Shot I Order 2 I Got 1

No

No

Ordered 8 more tins. Wanna have some fun? Make blocks of ice, and blast 'em. Work really well on small varmints.

They fit my .25 barrel snug, which means power. Don't change them.

Blocks of ice. Since there's not much recoil ---you get to watch the hit. Lots of fun.

Massive hitting power . I was able to hit 5 in a dime size hole with an unturned seneca 2500 .25 caliper on full power at 80 feet

More pellets per container and price is a bit much

Must use a most powerfull rifle my Hatsans Bt 65 and At 44 not powerfull enough

Shoot extremely well, very tight groups.

Clean them up, more per tin

Very tight groups and consistent ES, ugly pellets - several deformed, some kind of oily substance lines the tin along with flecks of lead, despite all that my Gauntlet loves them!!

ACCURACY

LENGTH TO FIT OTHER MAGS

WILL TAKE DEER IN 25 CAL, HAVE TO SINGLE LOAD ON MY GUNS EXCEPT FOR THE HERCULES BULLIES FIT GOOD IN THESE MAGAZINE BUT OTHER GUNS I HAVE I HAVE TO SINGLE LOAD BECAUSE OF THE LEGTH, BUT SHOOTS GOOD

Excellent for 25 Cal escape target plinking

These are hard hitting and accurate. They shoot very well out of my Sumatra 2500. They 'mushroom' out nicely when hitting hard targets, and carry enough momentum to rip through softer targets. I think these will be my go-to hunting pellet.

There are only 83 in a tin, so that makes them more expensive than most other .25 pellets. I wouldn't use them for plinking, just because of the cost, but they're worth it for hunting trips.

Even though they're very long, they fit into the Sumatra 2500 magazines nicely. They might not fit into thinner magazines though, so check the length before ordering.

Very hard-hitting

I'd like to get a few more pellets in a tin along with a screw-on top.

In .25 caliber, this pellet packs an absolute wallop. It tends to shoot a bit high in my Benjamin Trail XL, but it's also pretty predictable in doing this so with a little Kentucky windage, it's pretty accurate.

These are the best heavy pellet I have used in my marauder. They hit very hard and are very accurate at longer distances IF you sort through and pick out the defective ones.

The only thing I would change is that I wish another company would make this exact design and weight pellet with higher quality standards, preferably here in the United States. These Korean pellets are dirty, and there are lots of little lead shavings to be found in the can, and you can always count on finding more than a few pellets in each can that are mangled up.

If you want a heavy pellet that likes to be pushed fast, these are great. They penetrate very well at longer distances in game and they are very accurate (in MY marauder anyway, your results may vary.) but you do need to take the time to inspect them each individually before using them. Gen 1 .25 Marauder, with a Wicked Air Rifle's valve and larger transfer port, striker face turned all the way in on the hammer, 3 turns in on my stock hammer spring is the sweet spot for these. When my Marauder was stock I think I was using 5 turns on the hammer spring and the transfer port adjustment screw backed out all the way and I got very good results with these pellets at that time also. I would recommend these to anyone to try in their .25 marauder.

Balanced and go where I aim.

They do leave a heavy residue. Requires cleaning barrel after 75 to a 100 shots.

Like to have .30 and .357 Caliber. Good product for the money.

7 woodchucks down. Unfortunately there was one that got away, and I finally got a month later. The scar on the previous exit had a 1/2" center. I have a Benjamin trail np xl. Ranges up to 25 yards.

I can't complain

heavy enough.will only fit in airforce chambers for about five or six pellets then you have to brush the chamber out to shoot more then do it again every five or six shots.the airforce chambers are tight anyway.i have a 257 barrel in my airforce escape and they fit easy and never have to clean the chamber.they are the heaviest commercially available so i shoot them.would be your best choice for medium game at distance.

offer some heavier like 65 grains and round heads.they would be big sellers for single shot powerful air rifles.

I use these in my Armada 25 cal. Fpe with my rifle 1st shot 790fps @ 59 FPE yes you heard correctly 60 FPE. Shots 2-16 average 690fps 46 fpe @2900 pressure to 620 fps- 37 fpe @ 2100psi. Phenomenal power. Extremely accurate out to 50 yards. Hits like a tank, travels like a scapel. These are a relatively soft lead for their weight, but they retain their shape very well when shot into a 5 gal bucket of water from 12' above, also while shooting a 1" pressed pine board at 50 yards the pellet also retains it shape after impact. SO this may just make a great penetration round with the right shooter, and gun at range.

Need to clean these bad boys. Need more in the tin. Need a screw on top for the tin. The pointed end is a bit redundant it really does not improve much of anything on impact, just looks cool.

A Must Have For Any Shooter That Runs A Hot gun, or any Powerful Air rifle for that matter! Make sure your gun is a 800 fps gun or these will drop like stones with in a matter if meters. Lube them with the Crossman silicon chamber oil ( I took the JSB Match Diabolo Exact King .25 Cal, 25.39 Grains, Domed, 350ct tin used the foam padding soaked it with the Silicon chamber oil and placed three tins of the Eujins inside it. IT lubes, and cleans these dirty pellets simultaneously which will help get the Eujins past the bolt guide ring when chambering) if you are using any of the marauders they are just wide enough to rip your bolt guide o-ring out of place, and send it sailing into your target.

Hit hard

Lots of lead shavings in the tin.

Do not seat properly in bt65 mag.

Consistent size,and shape

Nothing

I use these in 177, and 25 cal. Their skittle heavy, but with correct hold over, they deliver hard killing accuracy out to 40 yards or more. I love em!!!

Shape Weight Quality

At least give ous 100 pellets and charge 9.99 if you must 83 is a weird amount to get.

These are the best you get for mass produced .25cal pellets. These go 983fps on the Sumatra 2500 on full power

I like the weight and the general shape. This is a good pellet for powerful PCP guns, I'm pushing them in the 940+fps area with my 25 caliber Condor and Sumatra rifle. I will say in the right gun, when driven at good high speeds, they are more than hunting accurate and have plenty of downrange energy for predator size game (they hit like a hammer), when you as a shooter do your part.

QC is very poor and the pointed tip is a poor design for an Airgun. A semi pointed dome pellet would increase BC, a badly needed feature of this pellet. These pellets should be washed and dried, then a very thin coat of Slick 50 or ? to keep them from oxidizing. The pellets are filled with all kinds of pieces of lead and lead filings in the tin ..very poor.

Pellet is way over sized for my Air Force Condor, I needed to size it down to .254 for a reasonable fit. Pellet should also come in a 150 screw top tin !