Air Venturi Female Quick-Disconnect Adapter, Male 1/8" BSPP Threads

Functions fine.

Nothing.

Not rated for 4500 psi.

This is so easy to use.

Nothing.

Sometimes getting a good seal with the refill probe requires sylicone grease
or backing of the probe just a little. This I experienced with my Sumatra 2500.
Change to quick disconnect fittings and save the hassle.

Good quality and the fit was right on.

Nothing

Be sure to use some plumbers tape to avoid any leaks.

It works just as I expected. I use it to fill the compressed air tank on my Benjamin Marauder.

Pyramid air should specify the fact that it does work for the Benjamin Marauder.

Be patient filling the compressed air tank. For your own safety, take a few more seconds filling it.

Fits tight and goes on easy and stays in place.

Nothing it works fine the way it is.

Be sure to tighten thoroughly (carefully)to the hose or you won't build pressure.

worked flawlessly, very smooth

nothing

Works just like it should

Nothing

I use this to connect my Airhog to my .25 Marauder. Works perfectly.

I Like the fact that at least there's some kind of adapter available.

THere should be an adapter that allows you to cross over to existing scuba equipments first stage high pressure line.

The only place I could find a crossover adapter was at a major plumbing supply. What's really nice about using your on first stage is the fact that the high pressure line only has a pinhole to allow the air to come through. So you get a nice controlled fill. I use the purge on the second stage to dump pressure on the line after the fill is completed.

Works just fine.

Should be included with Benjamin Marauder ... or at least a recommended accessory.

It did work.

Needs to be 316 SS. I don't like the brass and 3000#. Also I had a very hard time to make it seal at the conection to the hose. I did get it to seal however it took 3 tries.