Air Venturi 46M Upgraded Trigger, fits AV-46M & IZH 46M

An inexpensive way to add more adjustments to your IZZY. Gives more length to the trigger than the steel stock trigger.

The edges tend to be slightly sharp. The aluminum base is light, perhaps a small bit flimsy.

Get one!

I am very happy with this trigger. Installation was quick and easy. Much better feel than the skinny stock trigger. My IZH46 gets a lot of use on my deluxe garage range and this trigger is an inexpensive upgrade. My scores have improved.

Nothing

Be sure to use a properly fitting screw driver to remove the stock trigger. The slot is wide and shallow and the screw head is easily damaged.

A very simple add-on device.

I would have liked a description of how to remove the original trigger since it was very difficult to loosen the set screw.

The set screw needs to be turned counter-clockwise to loosen it and it's very tightly torqued. It helps to soak it with Kroil oil before trying toter it.

This unit fits properly, provides a good range of adjustments, and works as designed.

Its seems rather lightly built, and makes me worry about service life if adjusted many times. The addition of being able to change the rotation (cant) of the trigger shoe would make it a completely adjustable unit.

I would recommend it. I'm keeping it on my air pistol. It was a very worthwhile purchase for me.

Easy to install

Nothing

Adjustable finger angle

Little pricey

Must have item. More easy control two stage trigger.

Easy to install

I would have enclosed a simple installation sheet. One page. No big deal.

You have to lower the first stage adjustment screw.

I think the OEM trigger is a little thin and of less quality be-fitting this fine pistol. This upgrade changes all of that feeling. It makes the pistol feel like the championship quality pistol that it is.

Hmmm...A small, not too small, instruction leaflet would be nice. Example: The first stage screw must be lowered out of the way so the trigger stem can slide onto the trigger slot.

This is a must have accessory.
Very little expense and the practical use over-shadows the cost.

great bargain upgrade

you may need to re-adjust your sights = definitly better tighter groups

The unit is well made and installs easily. It gives a lot more tactile feel so I know when I have my finger square to the trigger. It's easier to know that I'm stroking the trigger straight back and not either pushing or pulling to the side.

My finger does not fall horizontally across the trigger. I doubt if anyones' does. It would be nice if the trigger blade could be rotated to accommodate the downward angle of the trigger finger.

As others have mentioned, this trigger cannot be adjusted quite as far back as the factory one. For me this is not an issue. Do remember that you want your finger to be square to the trigger after you've taken up the first stage travel. Also, I got a better fit by turning the blade upside down on the shaft. This is easily done.